Don Construction Products Ltd

Water based polyurethane anti-slip/sealer.

Cemflow Base is designed as a pump applied levelling base screed for use under Cemflow Topping or resin based materials, where thicker applications are required when upgrading and renovating new and existing internal floors.

Cemflow Exterior Topping is a polymer modified cementitious topping designed to eliminate surface irregularities and smooth internal and external concrete surfaces exposed to industrial traffic.

Cemflow Light is designed as a light duty floor topping for upgrading and renovating new and existing internal floors.

Cemflow Sealer is a clear, water-dispersed modified polyurethane sealer designed to be applied to Cemflow Topping to provide a hygienic and protective surface. The application of Cemflow Sealer helps to protect the floor surface and ease maintenance by reducing the adhesion of dirt and other debris. Cemflow Sealer is also resistant to many of the chemicals commonly found in commercial applications.

Cemflow Topping Pigmented is a coloured industrial grade floor topping for upgrading and renovating new and existing internal floors. Can be polished.

Cemflow Topping Pigmented is designed as a coloured industrial grade floor topping for upgrading and renovating new and existing internal floors. Can be polished.

Cemflow Topping is designed as an industrial grade floor topping for upgrading and renovating new and existing internal floors.

Cempatch Rapid Repair Mortar is a pre-packed single component cementitious repair mortar suitable for repairing and making good internal floors, stairs and steps and for general repairs to cracks and holes. It can be applied to rigid sound surfaces – sand/cement screed or concrete bases, asphalt, granolithic, terrazzo, ceramic and quarry tiles, epoxy and polyurethane coatings.

Cempatch Repair Concrete is designed as a fast setting high strength patch repair concrete for use in repairs subjected to heavy traffic in both internal and external applications.

DCP is an internationally renowned manufacturer of high quality products for the construction market. With more than 80 years experience this highly regarded UK manufacturer has a truly global reach.

Monoshake is a quartz based, chemically inert, dry shake floor topping for monolithic floors. The product contains a blend of specially graded aggregates, additives and Ordinary Portland Cements. Monoshake can also be used to suppress steel fibres in concrete floors.

Neoprene Primer is designed to promote the adhesion of Cemflow floor toppings to smooth non-absorbent surfaces such as steel, epoxy and polyester floors.

Setseal 6 is a clear, acrylic resin based, single pack solution designed to impregnate concrete surfaces combining the benefits of a curing aid, sealer, dustproofer and hardener. Setseal 6 has been designed to overcome the drawbacks of many commonly used curing membranes which tend to provide a limited service life following the curing period of new concrete. It has good abrasion resistance and can be coated with certain coatings.

Stopdust is a water-based acrylic-polymer emulsion that is used to seal cementitious wall and floor surfaces. Stopdust is applied by roller, brush or squeegee in one or more coats and dries to a clear, dust-free and hygienic finish. It has good durability to pedestrian and vehicular traffic.

Strongcoat DPM is a two-pack, solvent free epoxy-based damp-proof membrane for use with the DCP range of surface coatings and toppings. It suppresses residual construction moisture and rising dampness in concrete and sand/cement screeds and can be used in situations where the relative humidity level is above 75%. It is applied by brush or roller in one or two coats depending on the relative humidity of the floor.

Strongcoat HB PE is a cost effective premium quality two-pack, solvent free, epoxy-based coating, which provides floor surfaces with a seamless, hygienic and cosmetically attractive finish.

Strongcoat Primer is a two-pack solvent free, epoxy-based primer for use with the Strongcoat and Griptop range of surface toppings.

Strongcoat WD is a two-pack solvent free, water-based epoxy coating that provides wall and floor surfaces with a seamless, hygienic and cosmetically attractive finish.

Tibmix is a non-oxidizing, chemically inert, metallic dry shake floor topping for monolithic floors. The product contains a blend of specially graded aggregates, additives and Ordinary Portland Cements. Tibmix can also be used to suppress steel fibres in concrete floors.