Degafloor Ltd

The Project The Capital Quarter Development was more than just a facelift for Cardiff City Centre; it was part of the city’s regeneration scheme, covering over 10 acres of land and outlining plans for over 1,025,000 sq. ft. of development. This included offices, hotels, student housing, and educational facilities. To support the new development, a multi-storey car park was required.The Challenge The main contractor insisted that the car park should make a bold impression upon its grand opening, using high-quality materials for its exterior. They also wanted to ensure that the structure would have lasting protection for years to come. Degafloor was contacted for advice on a suitable, cost-effective, high-performance waterproofing system for the top deck, ramp, and interdeck areas of the car park.ConsultationDegafloor’s representatives conducted several site visits and performed a comprehensive assessment that addressed the client’s requirements. Degafloor specified the following systems:-        The Car Park Top Deck system with fleeced banding to address substrate cracks and all upstands for the top deck. -       The Car Park Heavy Duty system for the ramp, along with a fully fleeced CP TD system for areas over occupied car parks.Feedback The main contractor for the Capital Quarter Development was impressed with the fast-curing MMA technology, noting its durability and rapid curing time of just one hour following installation. Despite the installation occurring at a cold temperature of -6°C, the visual aesthetics were not compromised.The Results This combination of superior performance, skid resistance, rapid cure times, and design flexibility contributed to the project’s positive outcomes, with no complaints about the markings fading which can be used on roads, for road markings, and for road repairs.

Permanent pothole repair solutions for all car parks, roads and highwaysDegafill™ is an ultra-fast curing, permanent pothole repair solution for driveways, car parks, roads and highways provided in kit form.Based on high-performance methyl methacrylate (MMA) resin, Degafill bonds chemically to the existing asphalt or tarmac in just 20 minutes – delivering unrivalled strength and durability. Suitable for all roads and footpaths, Degafill offers outstanding durability, excellent skid resistance and the flexibility required for harsh weather conditions and temperature changes throughout the year.It’s manufactured from technologically advanced methyl methacrylate (MMA) resin, this cold applied solution offers an ultra-fast cure time and is suitable for repairs within asphalt substrates without the need to prime or cut back.There’s no need for any heavy petrol-driven equipment or machinery and will eliminate the need to refill potholes year after year as the permanent pothole repair solution is designed to last. Each kit comes even comes with a 5 year warranty. The Degafill™ Permanent Pothole repair Kit is BBA HAPAS approved, S164865Weather-proof solutionThe Degafill permanent pothole repair solution withstands the inevitable thermal movement of road surfaces throughout the year without compromising the strength and integrity of the bond to the surrounding area.Permanent pothole repair – the processWhatever the weather, whatever the size of pothole – it will be fixed in 4 simple steps and fully trafficable within 20 minutes after completion:Remove all loose materials by brush or compressed air (area doesn’t need to be 100% dry to work)Mix the Degafill pothole repair kit components together in the bucket providedPour the mixture in and smooth outSprinkle additional aggregates on top if requiredTake a look at our Degafill™ Video.Buy Degafill™ in our online shop

High performance resin for mortuary flooring areasAs with many high-care environments, mortuaries and post-mortem rooms require high performance flooring to cope with extremely demanding conditions. Any floor finish must be slip-resistant, hygienic, totally impermeable and incredibly durable.Traditional mortuary flooring specificationTraditionally, mortuaries and post-mortems rooms have utilised vinyl sheet or terrazzo floor tiles. However, both have inherent problems such as failed joints, cracks and poor slip resistance making them less than ideal. The failure of these traditional finishes can allow water and other contaminants to penetrate into the substrate below, which creates significant hygiene challenges.In addition to hygiene challenges, failed floors can create health and safety issues such as trip hazards and any repairs will be time consuming and disruptive.High performance mortuary specificationDegafloor have developed an alternative, high performance flooring specification, ideal for post-mortem and mortuary flooring. The Full Broadcast and QTA systems are ultra durable, seamless and highly slip-resistant finishes that can be easily cleaned.Both offer a profiled surface finish that provides outstanding slip-resistance and durability. Despite the surface texture, Degafloor flooring systems are easy to clean and and the seamless nature of these floors results in outstanding durability, avoiding contamination issues.Degafloor high performance flooring systems can bond to a variety of substrates, and cure both chemically and physically within 2 hours of installation. This ensures that every solution we deliver can be installed extremely quickly and cost effectively, resulting in minimal disruption.Our mortuary flooring projects include; Peterborough City Hospital, Royal Devon and Exeter Hospital, Barnsley General Hospital, Luton and Dunstable Hospital and Basingstoke & North Hampshire hospital.

The National Flooring Company, a Degafloor Ltd approved installer, have received another complimentary review following a kitchen refurbishment on the 23rd floor at a popular 4-star hotel in Manchester. Making the most of the quieter, New Year period, the hotel decided to upgrade their kitchen floor. Having worked at other locations for the popular hotel chain, The National Flooring Company were contacted to provide advice and following a successful proposal, were asked to complete the refurbishment. The kitchen, which is situated on the 23rd floor, required meticulous planning to ensure that works could be completed with minimal disruption to the hotel’s guests. The existing vinyl floor within the kitchen had become worn and brittle and sections were beginning to lift, causing a potential trip hazard. The vinyl floor was removed to expose the tiled finish underneath. Any loose tiles that had debonded from the floor were also removed and infilled with Degafloor Deep Fill, quick curing repair mortar.The National Flooring Company laid a scrape coat, embedded with a promesh reinforcing membrane, prior to the installation of the Degafloor Full Broadcast System (FB). The Degafloor FB system is broadcast with rounded aggregate to provide an anti-slip finish and retains this feature even in wet conditions to ensure employee safety is always maintained. As with all Degafloor systems, they are seamless and impervious, ensuring the floor will not lift, as previously experienced with the existing vinyl floor finish. Degafloor MMA resin flooring systems are fully cured within 2 hours of installation, allowing the hotel to resume normal kitchen operating procedures shortly after completion. MMA resins have a distinctive odour, but with the correct management, installations can progress with very little disruption. The National Flooring Company used the kitchen extraction system and sealed all doorways to contain and manage the odour.The project was completed to the satisfaction of the Chief Engineer, Hilton MCR, who commented on how good the floor looked. “The restaurant being on the 23rd floor presented a logistical challenge.  However, after careful planning and consideration of our hotel operations, The National Flooring Company completed the installation efficiently and to a high standard.  We were impressed with the service from start to finish.”

Degafloor Marine Coating System for Scottish fishing boatDegafloor’s Full Broadcast Marine Coating System was the ideal, hardwearing and long-lasting solution for the boat decking on Ocean Endeavour.Salt water and continuous drag of steel chains from the trawler nets quickly eroded the marine paint that was installed on the top deck of Ocean Endeavour.Once the marine paint was eroded, the slip-resistance was destroyed, making the top deck slippery and exposed to rust. Similar issues were occurring on lower decks where the paint quickly de-bonded causing rust and slip hazards.An annual repaint of the decks would have resulted in unproductive time in dock, continual erosion of the decks and health and safety issues. As a result, a more permanent solution was required.Degafloor, in partnership with PBP Services, developed the Full Broadcast Marine Coating System, an MMA resin-based solution specifically for the marine industry. This marine coating system chemically bonds to the steel decks to create a monolithic finish which will not delaminate or de-bond.Using Degafloor, the resin installation on all decks was completed in just 3 shifts of 12 hours, giving a very fast turnaround for Ocean Endeavour to be in use.A small area was left treated with just the marine paint in the bulkhead. Within one year the marine paint had failed and rust was becoming a serious issue again. In contrast, the Degafloor Full Broadcast Marine System was in perfect condition, with no delamination, excellent slip-resistance with no rusting.Installation of the Degafloor FB Marine System can be completed as part of a refurbishment, but with its hardwearing properties, is an ideal product to utilise as part of the construction process of any ship or trawler.

Degafloor supplied MMA resin flooring to a local school, Arthur Mellows Village College, for over 13 years. Much of the school already benefits from the previously installed hardwearing resin flooring systems. When they began building a new key stage 4 block, the Degafloor Flake system was once again the preferred choice for the new development, having already been installed across a large proportion of the college.Degafloor’s MMA resin: built to lastDegafloor’s MMA resin has shown its resilience over the years and gives the college floors a decorative finish that can be chosen from a standard range of colours or created in a bespoke finish. The college upholds a strong ethos to drive students to achieve their maximum potential, which is mirrored throughout the college’s state-of-the-art facilities. Degafloor’s MMA resin has a proven track record of longevity in educational establishments, with almost 50 installations to date. Our MMA systems offer excellent resilience to withstand large numbers of people and heavy machinery with a seamless, easy-to-install surface that minimises frequent repair. Before the project, our contractor installed a Retinol screed to accommodate thermal underfloor heating, using the Degafloor Flake system which totalled more than 200m2.The school flooring installed will last for years with little need for maintenance or repair. "Degafloor systems provide very durable and attractive floor finishes that enhances the appearance of the College environment."- Gary Wentworth, Site Manager, Arthur Mellows Village College

School kitchen flooring refurbishment Millfield is one of the leading UK independent schools for boys and girls, aged 2-18 years and has recently been subject to a significant makeover. The existing vinyl finishes showed signs of wear and needed to be replaced with new flooring that offered better slip resistance and durability without frequent repairs.The services of specialist industrial flooring installers, Inca Flooring & Structural Ltd, were called upon to offer advice and guidance in selecting the best school kitchen flooring solution.Millfield School required a flooring solution that could withstand the test of time in a constantly busy kitchen environment.To fulfil the client’s requirements to the highest standards, the contractors recommended using Degafloor’s fast curing, slip-resistant Full Broadcast System with associated coving. It uses fast-curing MMA resin.Degafloor Full Broadcast resin is specifically designed to deliver outstanding hygiene, performance and safety even in tough environments such as commercial kitchens, canteens and food technology areas.The school kitchen flooring was installed across two kitchen areas. Due to the ultra-fast curing nature of Degafloor MMA resin and the flexibility of the contractor, the entire project was completed over the Xmas break.

Slip-resistant steps for Villa Park, home of Aston Villa football club Degafloor were thrilled to be involved in the redevelopment of Aston Villa’s famous Villa Park football stadium. Slip-resistant flooring steps were required for the Holte End of the stadium in addition to new commercial facilities, including a new bar and suite complex.As part of the project, slip-resistant flooring steps were required. The entire 600m² staircases were treated with Degafloor concrete crack seal, followed by a flexible waterproof membrane to deliver an impervious solution to protect the new bar and suite complex. The staircases were then finished with a bespoke Degafloor Quartz Trowelled flooring with Aggregate System, finished in a unique Terracotta Quartz.To comply with current DDA legislation (Disability Discrimination Act) the flooring stairs were finished with a separately formed nosing in White.Due to the tight project timescale and to overcome traditional British weather constraints, Flo-Dek (UK) Ltd recommended a range of fast-curing Degafloor MMA resin flooring systems. As well as being fast curing, all Degafloor systems exhibit excellent UV resistance – essential for external environments – whilst the QTA flooring system applied to the treads offers unrivalled slip resistance to ensure spectator safety, whatever the weather conditions.Speaking on behalf of Flo-Dek (UK) Ltd, Sales Director Dave Cope said, “This was a very complex and demanding project. The colours had to match perfectly and the hand-formed nosings required a high level of skill and attention to detail”.

A Degafloor Approved Installer - The National Flooring Company Ltd were approached by a A 4-star hotel, in the South of England, who had decided to update their flooring system around the swimming pool. The existing floor tiles, which had started to debond posed a trip hazard and therefore needed to be replaced. The client also advised they were experiencing problems with standing water.Following the removal of the existing floor tiles, the installation of a new screed was required to build back the levels and ensure there were adequate falls in the floor for water to run back into the pool. Throughout the installation, the gym remained open, and it had been advised that the pool closure needed to be kept to an absolute minimum. The National Flooring Company installed the Degafloor Deep Fill Mortar Repair system, a fast-curing underlayment, which ensured the refurbishment programme could continue with no downtime due to curing.The existing drain was removed and replaced, along with the light box and leveller covers, which all received new stainless-steel units. A new trim was fixed around the perimeter of the pool and the Degafloor resin system, which has an excellent bond to metal surfaces, was abutted up to all the stainless-steel items. The Degafloor QTA system used within the project, is a quartz trowelled system that can be laid to falls. The system is broadcast with aggregate to provide an extremely slip resistant finish, even under wet conditions, making it ideally suited to a swimming pool surround. Coved skirting was installed around the perimeter of the room creating a completely impervious finish, with no weak spots and therefore reducing future maintenance costs. The full refurbishment was completed over 12 days, ensuring that the closure was kept to a bare minimum.The clients main requirements were they required an anti-slip floor that would eliminate the current situation they had with standing water. They specifically requested that the closure was kept to a minimum as they are a "member's club" as well as facilitating the hotel, which remained open throughout the installation. The client was extremely satisfied with the end result and felt they now have a floor finish that is much better suited to their environment.

Moy Construction Co Ltd were awarded a contract to refurb the swimming pool and changing areas at Perseid School in Surrey. The school offers an educational provision for children with difficulties and/or physical/sensory difficulties, and therefore, safety was paramount. As part of the refurbishment a hardwearing, slip-resistant flooring system that offered longevity was essential. The floor has been previously tiled, but due to water ingress, kept failing and required frequent repair. Rising maintenance costs and risk of slips prompted the school to look for alternative solutions, with resin being an obvious choice. An MMA resin floor provides a seamless, hardwearing and impermeable finish that will offer years of service. Moy Construction Co Ltd removed the existing floor tiles and installed a new screed prior to the installation of the resin system.From the offset, achieving a floor finish with a suitable slip rating was non-negotiable. The Degafloor QTA system is a quartz trowelled system which can be laid to falls. The system, which is broadcast with a quartz aggregate, provides excellent slip resistance, even in wet conditions, ensuring high levels of safety are maintained at all times.The project, which included the swimming pool surround and adjoining changing rooms, totalled 145 sqm and 135 lm of coving. The installation was completed over 5 days and to the satisfaction of Moy Construction Co Ltd, who were happy to have the project completed to a high standard, on time and within budget.

National Flooring Co Ltd, one of our Approved Contractors was approached by Moy Construction Co Ltd who were awarded a contract to refurbish the swimming pool and changing areas at Perseid School in Surrey. The school offers an educational provision for children with learning difficulties and/or physical/sensory difficulties, and therefore, safety was paramount. As part of the refurbishment a hardwearing, slip-resistant flooring system that offered excellent longevity was essential. The floor had been previously tiled, but due to water ingress, kept failing and required frequent repair. Rising maintenance costs and risk of slips prompted the school to look for alternative solutions and resin became an obvious choice. A Degafloor resin floor provides a seamless, hardwearing, and impermeable finish that will offer years of service. Moy Construction Co Ltd removed the existing floor tiles and installed a new screed prior to the installation of the resin system. From the offset, achieving a floor finish with a suitable slip rating was non-negotiable.The Degafloor QTA system is a quartz trowelled system which can be laid to falls. The system, which is broadcast with a quartz aggregate, provides excellent slip resistance, even in wet conditions, ensuring high levels of safety are always maintained. The project, which included the swimming pool surround and adjoining changing rooms, totalled 145 sqm of floor and 135 lm of cove. The installation was completed over 5 days and to the satisfaction of Moy Construction Co Ltd, who were happy to have the project completed to a high standard, on time and within budget.

The well known traditional British cheese producer, Long Clawson Dairy, required dairy flooring renovation at their Melton Mowbray site. The refurbishment areas included a number of production areas, including the Cheese Room floor. The client needed a hardwearing, slip-resistant, hygienic flooring to cover areas of approximately 200m².Having previously worked with The National Flooring Company on other projects, the client contacted the Degafloor Approved Installer to ask for advice on the best solution for the upcoming works. As the factory is in constant production, attention to detail was required regarding dust and fumes.Drainage was another consideration for the dairy flooring. The drainage was required to be fully operational after the installation, so for best results the contractors recommended using the Degafloor Quartz Trowelled with Aggregate resin flooring. QTA is a trowel-applied system with a quartz scatter finish that will not run into the drains upon application.Long Clawson Dairy needed a flooring solution that could be installed quickly and deliver long-term performance. Degafloor resin systems are based on ultra fast curing methyl methacrylate technology that enables rapid installation and cures as fast as two hours after application.The dairy flooring project was completed in just 6 days over 2 separate shifts. The fast curing properties of Degafloor MMA resin flooring enabled production to commence just 2 hours after the new floors and coving were installed. The Operations Director of Long Clawson Dairy was extremely happy with the end result.

Car park refurbishment for Dublin City UniversityMcKeon Construction Limited, were looking for a durable and innovative resin waterproofing system for one of their clients, Dublin City University (DCU). The university required car park refurbishment to a multi-storey car park where the existing deck coating had started to fail.McKeon discussed the client requirements with Larsen Contracts (Ireland) Ltd, a specialist resin contractor. Larsen recommended the Degafloor Top Deck System for the car park refurbishment.The Degafloor Car Park Top Deck System is designed to offer the outstanding flexibility and performance required for top decks of multi-storey car parks. The unique formulation allows installation to occur extremely quickly, with the main system of 23mm being installed in a single application process.The project was completed according to specification, within budget and on time. DCU and McKeon Construction Ltd are delighted with the results and the numerous benefits that the Degafloor Top Deck System has delivered, including: outstanding durability, flexibility, a totally seamless and impervious finish, exceptional slip resistance and visually pleasing aesthetics.Eddie O’Brien of Larsen Contracts Ltd commented: “The Degafloor Car Park Top Deck System enabled us to complete the installation within the short window of time available (weather wise). Traditionally, we have been unable to complete car park projects outside of summer months due to weather and temperature constraints, but this new system has made it possible for us to complete car park installations all year round.”

Bespoke resin flooring for luxury stablesTattersall Race Course (Ireland) required a bespoke resin flooring solution that could offer a very specific blend of outstanding durability, slip resistance, ease of maintenance and visual appeal. It was also crucial the new floor would be equally fit-for-purpose internally and externally, without losing its safety properties when exposed to weather changes.Tattersall is an international firm offering 10,000 thoroughbred horses each year at 15 sales at either its Newmarket headquarters in England, or at Fairyhouse outside Dublin, in Ireland.As a premier facility that offers only the best horses to the most discerning customers, Tattersalls takes immense pride in maintaining immaculate premises. This focus requires regular maintenance and refurbishment projects, and Degafloor is proud to have been involved in one of the most recent.Working in conjunction with approved partner Larsen Contracts (Ireland) Ltd, we were invited to assess the current floor finish within one of the stable blocks at Fairyhouse and recommend a bespoke resin flooring finish, based on Degafloor’s slip-resistant Full Broadcast System.To achieve the best and most consistent finish possible, the heavily tamped concrete was diamond ground, then shot blasted. The bespoke resin flooring was applied in 6 layers; first a primer, next a scratch coat was applied to create a smooth and even finish. The main system layer was then installed and a full broadcast of bauxite applied. The system was finished with 2 x coats of clear Degafloor MMA seal.Speaking on behalf of Larsen Contracts, Contracts Director Eddie O’Brien said, “It is an honour to have been involved in this project and to work for Tattersalls and, in a small way, play a part in maintaining Ireland’s rich horse racing heritage.”