A-Z
Showing 1-36 of 83
Bauder 110g Reinforcement Fleece
Bauder Ltd
Polyester reinforcement fleece used in conjunction with Bauder LiquiTEC products to provide strength and allow elasticity of the membranes without splitting.
Reinforcement in the Bauder LiquiTEC Roof, Detail and Balcony Systems. It is suitable for use in cold roof, warm roof, and inverted applications.
Bauder Activator-Primer (Canister) APR01 - black
Bauder Ltd
A synthetic rubber resin-based material using a non-flammable solvent and propellant system.
Developed to provide the necessary preparation of substrates, insulations and underlayers prior to the installation of Self-Adhesive membranes.
The product can also be used with torch-on membranes as well as a foil contact adhesive and fleece-backed membrane adhesive.
Bauder Bitumen Compact Vertical Outlet DN 100
Bauder Ltd
A thermally insulated cast polyurethane rainwater outlet with vertical spigot giving thermal continuity. The outlet comes with a pre-attached bituminous flange to ensure waterproofing integrity between the outlet and membranes. The BRE Certified (report no. HPR357-303748) high thermal value of the rigid foam body prevents condensation from forming on the underside of the outlet body.
Outlet has a flow rate of 6.1 litres/sec based upon requirements of BS EN 12056:3:2000.
Only to be used as part of a full Bauder Bituminous Waterproofing System.
Bauder Bitumen Vertical Outlet DN70 & 150
Bauder Ltd
A thermally insulated cast polyurethane rainwater outlet with vertical spigot giving thermal continuity. The outlet comes with a pre-attached bituminous flange to ensure waterproofing integrity between the outlet and membranes. The BRE Certified (report no. HPR357-303748) high thermal value of the rigid foam body prevents condensation from forming on the underside of the outlet body.
Outlet has a flow rate of 7.1 (70DN) & 7.2 (150DN) litres/sec based upon requirements of BS EN 12056:3:2000.
Only to be used as part of a full Bauder Bituminous Waterproofing System.
Bauder Catalyst - Technical Data Sheet
Bauder Ltd
Bauder EGV 35 TF Roofing membrane - Technical Data Sheet
Bauder Ltd
Bauder EVA 35 Roofing membrane
Bauder Ltd
Elastomer bitumen air & vapour control layer, torch-on membrane.
Bauder Fleece-Backed Membrane Adhesive - Canister - Product Data Sheet
Bauder Ltd
Bauder GRP Trim & GRP Watercheck Trim
Bauder Ltd
Bauder GRP Trim & Bauder GRP Watercheck Trim are made from glass reinforced plastic. GRP has a far lower coefficient of thermal expansion than aluminum or steel meaning less movement at the joints, along with a higher strength to weight ratio.
Bauder GRP trims are to be used at roof edges in conjunction with Bauder bituminous roof systems.
The Watercheck Trim can also be used with Liquid applied membranes.
GRP Trim - choice of colours and profile sizes.
GRP Watercheck Trim - Black only & one profile size.
Bauder K5K Roofing Membrane (Brown)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
Bauder K5K Roofing membrane (Charcoal Grey)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
Bauder K5K Roofing membrane (Grey Slate)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
Bauder LiquiBALKON
Bauder Ltd
LiquiBALKON is a fast curing, cold applied liquid waterproofing resin, for use on the main flat area of the LiquiTEC Reinforced Balcony System.
LiquiBALKON is used as the main area waterproofing in the Bauder LiquiTEC Reinforced Balcony Systems. It is suitable for use in cold roof, warm roof and inverted applications. It is applied by roller in two coats ‘wet on wet’, fully reinforced with Bauder 110g Reinforcement Fleece. The product is a PMMA based resin and requires the addition of catalyst to cure. It is solvent, isocyanate and halogen free.
Bauder LiquiDEK
Bauder Ltd
LiquiDEK is a fast curing, cold applied liquid waterproofing resin, for use on the main roof area of the LiquiTEC Roof and Roof Terrace System.
LiquiDEK is used as the main area waterproofing of the Bauder LiquiTEC Roof and Roof Terrace System. It is suitable for use in cold roof, warm roof, inverted roof and green roof applications. It is applied by roller in two coats ‘wet on wet’, fully reinforced with Bauder 110g Reinforcement Fleece. The product is a PMMA based resin and requires the addition of catalyst to cure. It is solvent, isocyanate and halogen free.
Bauder LiquiDETAIL
Bauder Ltd
LiquiDETAIL is a fast curing, cold applied liquid waterproofing resin, for use on the detail area of the LiquiTEC Roof and Balcony Systems.
LiquiDETAIL is used as the detail waterproofing in the Bauder LiquiTEC Roof and Balcony Systems. It is suitable for use in cold roof, warm roof and inverted applications.
It is also used as cold applied liquid detailing for standalone gutters and in Bauder Reinforced Bitumen and Single Ply systems where hot works are not allowed or where complex details are present. It is applied by roller in two coats ‘wet on wet’, fully reinforced with Bauder 110g Reinforcement Fleece. The product is a PMMA based resin and requires the addition of catalyst to cure. It is solvent, isocyanate and halogen free.
Bauder LiquiFIBRE
Bauder Ltd
LiquiFIBRE is a cold applied fast curing liquid waterproofing resin containing fibre reinforcement. The product is a PMMA based resin and requires the addition of catalyst to trigger curing. It is solvent, isocyanate and halogen free.
LiquiFIBRE is used when detailing awkward shapes or inaccessible areas where the use of LiquiDETAIL with Bauder 110g Reinforcement Fleece is impractical and there is minimal differential movement. It can be used with the LiquiTEC Roof, Detail and Balcony systems as well as Bauder Reinforced Bitumen and Single Ply systems.
The product must be mixed with Bauder Catalyst to cure. Bauder Catalyst must be ordered separately.
Bauder LiquiFINISH
Bauder Ltd
LiquiFINISH is a fast curing cold applied liquid final coat for use with LiquiTEC systems. The product is a PMMA based resin and requires the addition of catalyst to trigger curing. It is solvent, isocyanate and halogen free.
LiquiFINISH is used to seal and bind the quartz wearing course in LiquiTEC Balcony, Walkway & Terrace Systems, and to provide the desired colour to the finished waterproofing. It can also be used to provide a colour change to the LiquiTEC Roof system and as the seal coat to maintenance heavy duty walkways.
The product must be mixed with Bauder Catalyst to cure. Bauder Catalyst must be ordered separately.
Bauder LiquiPAVE RF - Technical Data Sheet
Bauder Ltd
Bauder LiquiPRIME 1 - Technical Data Sheet
Bauder Ltd
Bauder LiquiPRIME 2 - Technical Data Sheet
Bauder Ltd
Bauder LiquiTOP General Purpose Primer
Bauder Ltd
A single component polyurethane primer for improving the adhesion of LiquiTOP Roof Systems to various substrates such as concrete, masonry, exposed bitumen and absorbent asphalt. Improves adhesion to porous or dusty substrates.
Bauder LiquiTOP Glass Fibre Mat
Bauder Ltd
LiquiTOP Glass Fibre Mat is a porous 225gsm chopped strand glass fibre mat with an emulsion binder with one cut edge and one feathered edge.
LiquiTOP Glass Fibre Mat is used as the reinforcement in the Bauder LiquiTOP Roof Systems. It is suitable for use in cold roof and warm roof situations for new build and refurbishment projects.
Bauder LiquiTOP PU
Bauder Ltd
A single component, moisture triggered polyurethane, cold
applied liquid waterproofing resin, for use in LiquiTOP Roof Systems. It is applied by roller and is fully reinforced with Bauder LiquiTOP Glass Fibre Mat.
The moisture triggered technology utilises atmospheric and substrate moisture to initiate the curing mechanism forming a fully cross linked polymeric waterproofing membrane.
Bauder Parapet Emergency Overflow Stainless Steel DN 70 - Technical Data Sheet
Bauder Ltd
Bauder Polyester Reinforcement Sheet - Technical Data Sheet
Bauder Ltd
Unsaturated spun-bonded polyester mat for use within Bakor Hot Melt Waterproofing System.
Allows good inter-ply bond between layers of hot melt membrane. It will not absorb moisture or rot, resists damage from soil acids and alkalis.
Bauder Polymer Primer - Technical Data Sheet
Bauder Ltd
Synthetic rubber-based primer applied by roller or brush. Designed to speed up its installation due to its quick drying properties (15–30 minutes) over standard Bauder Quick Dry Bitumen Primer (3–6 hours).
Bauder PU Insulation Adhesive - Tin
Bauder Ltd
A single component PU Insulation Adhesive.
A foaming moisture-curing polyurethane and is solvent free, non-flammable, and has low odour.
Bauder Quartz
Bauder Ltd
Bauder Quartz is a light coloured, naturally rounded quartz aggregate available in three graded sizes. It is washed, dried, dedusted and graded.
Bauder Quartz is used in Bauder Cold Applied Liquid balcony and roof systems to provide a hard-wearing anti-skid finish, as a key for adhered tiles and as a bulk filler in mortar mixes.
Bauder Quick Dry Bitumen Primer - Technical Data Sheet
Bauder Ltd
Bauder SA Bonding Primer - Technical Data Sheet
Bauder Ltd
Bauder Super AL-E Roofing membrane
Bauder Ltd
Elastomer bitumen air & vapour control layer, torch-on membrane
Bauder SVP Cover - Technical Data Sheet
Bauder Ltd
Bauder waterproofing systems are now CCPI verified.
Bauder Ltd
As a market leader in bringing high-quality products and systems to the roofing and construction industry, Bauder is leading the way again, by adopting the new Code for Construction Product Information (CCPI) across our roofing portfolio to have information verified for accuracy and clarity to ensure specifiers can rely on the data when selecting a Bauder solution.
BauderECO FF - Technical Data Sheet
Bauder Ltd
Rigid foam thermoset Polyisocyanurate (PIR) board
BauderFLEX G4E Roofing membrane - Technical Data Sheet
Bauder Ltd
BauderFLEX K4E Roofing membrane (Brown)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
Showing 1-36 of 83