A-Z
Showing 1-36 of 177
Bauder 110g Reinforcement Fleece
Bauder Ltd
Polyester reinforcement fleece used in conjunction with Bauder LiquiTEC products to provide strength and allow elasticity of the membranes without splitting.
Reinforcement in the Bauder LiquiTEC Roof, Detail and Balcony Systems. It is suitable for use in cold roof, warm roof, and inverted applications.
Bauder Activator-Primer (Canister) APR01 - black
Bauder Ltd
A synthetic rubber resin-based material using a non-flammable solvent and propellant system.
Developed to provide the necessary preparation of substrates, insulations and underlayers prior to the installation of Self-Adhesive membranes.
The product can also be used with torch-on membranes as well as a foil contact adhesive and fleece-backed membrane adhesive.
Bauder AP1 Access Protection Sheet - Technical Data Sheet
Bauder Ltd
1.5mm thick glass reinforced, modified bitumen with a sanded surface bituminous membrane. Only for use in Bauder Bakor system, where it is not left exposed.
Bauder Bakor 790-11 Hot Melt Rubberised Bitumen - Technical Data Sheet
Bauder Ltd
Bakor Hot Melt Technical Data Sheet
Bauder Bitumen Cable Duct DN 110 - Technical Data Sheet
Bauder Ltd
Bauder Bitumen Compact Vertical Outlet DN 100
Bauder Ltd
A thermally insulated cast polyurethane rainwater outlet with vertical spigot giving thermal continuity. The outlet comes with a pre-attached bituminous flange to ensure waterproofing integrity between the outlet and membranes. The BRE Certified (report no. HPR357-303748) high thermal value of the rigid foam body prevents condensation from forming on the underside of the outlet body.
Outlet has a flow rate of 6.1 litres/sec based upon requirements of BS EN 12056:3:2000.
Only to be used as part of a full Bauder Bituminous Waterproofing System.
Bauder Bitumen Letterbox Parapet Outlet DN 205 including ss leaf guard
Bauder Ltd
Bauder Bitumen Vertical Outlet DN70 & 150
Bauder Ltd
A thermally insulated cast polyurethane rainwater outlet with vertical spigot giving thermal continuity. The outlet comes with a pre-attached bituminous flange to ensure waterproofing integrity between the outlet and membranes. The BRE Certified (report no. HPR357-303748) high thermal value of the rigid foam body prevents condensation from forming on the underside of the outlet body.
Outlet has a flow rate of 7.1 (70DN) & 7.2 (150DN) litres/sec based upon requirements of BS EN 12056:3:2000.
Only to be used as part of a full Bauder Bituminous Waterproofing System.
Bauder Catalyst - Technical Data Sheet
Bauder Ltd
Bauder Catalyst - Technical Data Sheet (TDS)
Bauder Ltd
Bauder Catalyst is a powdered hardener for Bauder LiquiTEC PMMA
products.
Bauder EGV 35 TF Underlayer - Technical Data Sheet
Bauder Ltd
Elastomer bitumen, torch-on underlayer
Bauder EVA 35 Air and Vapour Control Layer
Bauder Ltd
Elastomer bitumen air & vapour control layer, torch-on membrane.
Bauder FPO Lightning Conductor Clips - Technical Data Sheet
Bauder Ltd
Bauder GRP Trim & GRP Watercheck Trim
Bauder Ltd
Bauder GRP Trim & Bauder GRP Watercheck Trim are made from glass reinforced plastic. GRP has a far lower coefficient of thermal expansion than aluminum or steel meaning less movement at the joints, along with a higher strength to weight ratio.
Bauder GRP trims are to be used at roof edges in conjunction with Bauder bituminous roof systems.
The Watercheck Trim can also be used with Liquid applied membranes.
GRP Trim - choice of colours and profile sizes.
GRP Watercheck Trim - Black only & one profile size.
Bauder GRP Trim Angles - Technical Data Sheet
Bauder Ltd
Bauder Hot Melt Compact Vertical Outlet DN100 - Technical Data Sheet
Bauder Ltd
thermally insulated outlet incorporating a one-piece rigid polyurethane foam body that forms the integral
sump and spigot designed for use when connecting to conventional gravity drainage systems. For use with Bauder Hot Melt Bakor systems only.
Bauder JFRI PREMIUM (300) Inverted Insulation - Technical Data Sheet
Bauder Ltd
Inverted EPS insulation technical data sheet
Bauder JFRI PREMIUM+ Inverted Insulation - Technical Data Sheet
Bauder Ltd
Inverted EPS insulation technical data sheet
Bauder JFRI WFRL Membrane - Technical Data Sheet
Bauder Ltd
Flexible sheet of polypropylene strands randomly spun-bonded. It is supplied as part of the BauderJFRI
and BauderGLAS Inverted Insulation Systems situated on top of the inverted insulation and under the specified surfacing.
Bauder K5K Roofing Membrane (Brown)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
Bauder K5K Roofing membrane (Charcoal Grey)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
Bauder Lightning Conductor Clips - Technical Data Sheet
Bauder Ltd
Bauder LiquiBALKON
Bauder Ltd
LiquiBALKON is a fast curing, cold applied liquid waterproofing resin, for use on the main flat area of the LiquiTEC Reinforced Balcony System.
LiquiBALKON is used as the main area waterproofing in the Bauder LiquiTEC Reinforced Balcony Systems. It is suitable for use in cold roof, warm roof and inverted applications. It is applied by roller in two coats ‘wet on wet’, fully reinforced with Bauder 110g Reinforcement Fleece. The product is a PMMA based resin and requires the addition of catalyst to cure. It is solvent, isocyanate and halogen free.
Bauder LiquiDEK
Bauder Ltd
LiquiDEK is a fast curing, cold applied liquid waterproofing resin, for use on the main roof area of the LiquiTEC Roof and Roof Terrace System.
LiquiDEK is used as the main area waterproofing of the Bauder LiquiTEC Roof and Roof Terrace System. It is suitable for use in cold roof, warm roof, inverted roof and green roof applications. It is applied by roller in two coats ‘wet on wet’, fully reinforced with Bauder 110g Reinforcement Fleece. The product is a PMMA based resin and requires the addition of catalyst to cure. It is solvent, isocyanate and halogen free.
Bauder LiquiDETAIL
Bauder Ltd
LiquiDETAIL is a fast curing, cold applied liquid waterproofing resin, for use on the detail area of the LiquiTEC Roof and Balcony Systems.
LiquiDETAIL is used as the detail waterproofing in the Bauder LiquiTEC Roof and Balcony Systems. It is suitable for use in cold roof, warm roof and inverted applications.
It is also used as cold applied liquid detailing for standalone gutters and in Bauder Reinforced Bitumen and Single Ply systems where hot works are not allowed or where complex details are present. It is applied by roller in two coats ‘wet on wet’, fully reinforced with Bauder 110g Reinforcement Fleece. The product is a PMMA based resin and requires the addition of catalyst to cure. It is solvent, isocyanate and halogen free.
Bauder LiquiFIBRE
Bauder Ltd
LiquiFIBRE is a cold applied fast curing liquid waterproofing resin containing fibre reinforcement. The product is a PMMA based resin and requires the addition of catalyst to trigger curing. It is solvent, isocyanate and halogen free.
LiquiFIBRE is used when detailing awkward shapes or inaccessible areas where the use of LiquiDETAIL with Bauder 110g Reinforcement Fleece is impractical and there is minimal differential movement. It can be used with the LiquiTEC Roof, Detail and Balcony systems as well as Bauder Reinforced Bitumen and Single Ply systems.
The product must be mixed with Bauder Catalyst to cure. Bauder Catalyst must be ordered separately.
Bauder LiquiFINISH
Bauder Ltd
LiquiFINISH is a fast curing cold applied liquid final coat for use with LiquiTEC systems. The product is a PMMA based resin and requires the addition of catalyst to trigger curing. It is solvent, isocyanate and halogen free.
LiquiFINISH is used to seal and bind the quartz wearing course in LiquiTEC Balcony, Walkway & Terrace Systems, and to provide the desired colour to the finished waterproofing. It can also be used to provide a colour change to the LiquiTEC Roof system and as the seal coat to maintenance heavy duty walkways.
The product must be mixed with Bauder Catalyst to cure. Bauder Catalyst must be ordered separately.
Bauder LiquiPASTE - Technical Data Sheet
Bauder Ltd
Bauder LiquiPAVE F - Technical Data Sheet
Bauder Ltd
Bauder LiquiPAVE R - Technical Data Sheet
Bauder Ltd
Bauder LiquiPAVE RF - Technical Data Sheet
Bauder Ltd
Bauder LiquiPOCKET Detailing Kit - Technical Data Sheet
Bauder Ltd
Bauder LiquiPRIME 1 - Technical Data Sheet
Bauder Ltd
Bauder LiquiPRIME 1 Technical Data Sheet (TDS)
Bauder Ltd
LiquiPRIME 1 is a cold-applied liquid fast-curing primer for use when installing the Bauder LiquiTEC system over asphalt, exposed bitumen and timber-based substrates. The product is a PMMA based-resin and requires the addition of catalyst to trigger curing. It is solvent-, isocyanate- and halogen-free.
Bauder LiquiPRIME 2 - Technical Data Sheet
Bauder Ltd
Bauder LiquiPRIME 2 Technical Data Sheet (TDS)
Bauder Ltd
LiquiPRIME 2 is a cold applied liquid fast curing primer, for use when installing the Bauder LiquiTEC system over brickwork and concrete based substrates.
The product is a PMMA based resin and requires the addition of catalyst to trigger curing. It is solvent-, isocyanate- and halogen-free.
Showing 1-36 of 177