PCT Chemie UK supply a range of advanced Retanol floor screeding products to the UK screed market.

Manufactured in Stuttgart in Germany by our parent company PCT Performance Chemicals GmbH, Retanol Xtreme Screed delivers significant programme savings and offers the following incredible and guaranteed performance benefits:

Drying time of 48 hours for tile finishes, and 72 hours for all other floor finishes for screeds up to 50mm for non-heated screeds and 65mm for heated screeds
Compressive strength range from 40 N/mm² to 60 N/mm²
Flexural strength range from 6 N/mm² to 8 N/mm²
80-90% of final screed strength achieved in the first 4 days
Bonded screeds from 15mm thick
Un-bonded/floating screeds from 35mm
BREEAM and TÜV Rhineland Certified and recognised under European Law as the only screed additive as having no negative impact on human health. Retanols are free of harmful content such as carbon black or respirable crystalline silicates
Underfloor heating can be turned on 24 hours after installation with just a 4 day heating cycle
Retanols are insensitive to moisture so suitable for wet areas
Very low tension so shrinkage is minimised or even avoided
No polythene sheets required for screed curing, thus improving sustainability
No fibre reinforcement required to enhance performance
Retanols never require a damp proof membrane applied to its surface
Workable life of 90 - 120 minutes
Foot traffic after 24 hours,
Site traffic after 48 hours, and fully loadable after 5 to 7 days
Up to 60% improved thermal conductivity (λ= 2.35 [W/m²K) compared to other screeds due to self-compaction and less air pores
All Retanol products are CE and now UKCA Certified and safe to use. They also fully satisfy German DIN Standards (Deutsches Institut für Normung - German Institute for Standardization)
Unique product performance (rather than just defective material) guarantee from Manufacturer.

Wheel Mark Certificate - Certificate of Conformity