Steel section door frame, reveal lining and edge bead for single & double riser doors in gypsum board faced, metal or timber stud internal walls.

Features and benefits:

Plaster is feathered over perforated face to produce seamless appearance after painting.
Eliminates need for separate lining board or architrave.
Suitable for construction of jib doors.
Suitable for 30/60 fire rated doors. Maximum door sizes apply.
Rapid, economic installation.
Durable edges.
Choice of door sizes available - dependant on fire rating.
Cold rolled, pre galvanized and annealed steel. Gauge: 0.86 mm. Coating: G90 (approximately equivalent to 90 g/m²).
Supplied by manufacturer cut to finished length, fitted with head joiner insert at corners, punched for hinges and strike plate.
Door width (maximum): 1000 mm.
Door height (maximum): 3000 mm.
For internal use only.

Door leaf size (maximum):

Where leaf size is specified, tolerances will be added by manufacturer. Actual maximum varies with door weight and number of hinges; consult manufacturer for details.

- FD30 (w x h):

Single: 1000 x 3000 mm.
Double (Widest available): 1015 / 1015 x 2030 mm.
Double (Tallest available): 825 / 825 x 2498mm

- FD60:

Single, wider variant: Widths of 901–955 mm have a maximum height of 2440 mm.
Single, taller variant: Widths of 900 mm or less have a maximum height of 2525 mm
Double, wider variant: Widths of 901–926 mm have a maximum height of 2440 mm.
Double, taller variant: Widths of 900 mm or less have a maximum height of 2480 mm.

Installation:

Screw frame through perforated face to edge studs at 200 mm centres (maximum). Double screw at ends and hinge points.

Una FD30 Field of Application Report