Creates a minimalist interior.

Selo’s concealed frame doorset range provides a solution to the age-old problem of achieving a flush, seamless door finish without the use of architraves or shadow gaps.

Innova is a concealed frame doorset, made up of a steel one part door frame for single and double doors in gypsum board faced, metal or timber stud internal walls.

Features and benefits:

Plaster is feathered over the perforated face of the frame to produce a seamless appearance.
Eliminates the need for separate lining board or architrave.
Suitable for construction of jib doors.
Suitable for 30 minute fire-rated single doors only. Maximum door sizes apply.
Rapid, economic installation.
Durable edges.
Choice of size. Specials available.
Cold rolled, pre galvanized and annealed steel. Gauge: 0.86 mm. Coating: G90 (approximately equivalent to 90 g/m²).
Supplied by manufacturer cut to finished length, fitted with head joiner insert at corners, punched for hinges and strike plate.
Door width (maximum): 1100 mm.
Door height (maximum): 3000 mm.
For internal use only.

Installation:

Screw frame through perforated face to edge studs at (maximum) 200 mm centres. Double screw at ends and hinge points. Plasterers jointing tape to be applied to top corners before plastering/ jointing.

Wall thickness:

For use on internal walls with a thickness of 75–310 mm.

Door leaf size (maximum):

Where leaf size is specified, tolerances will be added by manufacturer. Actual maximum varies with door weight and number of hinges; consult manufacturer for details.

- FD30 (w x h):

Single: 1100 x 3000 mm.

Innova FD30 Global Assessment