The BDM800 Beam Detector Module is designed to interface the MINERVA® FireRay 50R/100R/2000 Beam Detectors to the MX Digital Addressable Loop. The BDM800 provides power from the loop, monitors the Fire and Fault Relay Contacts of the detector and also monitors the wiring to the detector for open and short circuit faults.

The BDM800 can be used to power the complete MINERVA® FireRay 2000 system (via the loop) or just the control and receiver units with a second BDM800 used to power the transmitter unit. Up to Thirteen BDM800’s driving MINERVA® FireRay 50R/100R/2000 beam detectors can be connected to a single loop.

Features and benefits:

Powers Beam Detectors directly from the MX Digital Loop.
Reduces wiring and installation costs.
Monitors Beam Detectors for Fire and Fault.
Monitors interconnections for open and short circuit faults.
LPCB and VdS Approved.
Can be installed to BS5839 Part 1:2002.
Onboard LED indicates polling and activation.
May be used with the MINERVA® FireRay 50R and 100R reflective beam for greater savings on installation.
Compatible with the MINERVA® FireRay 2000 beam detector.
Optional BTM800 beam termination module to further simplify installation.
Supplied fitted to a standard double gang ancillary front cover.

BDM800 CPR