Create your dream minimalist interior.

Selo’s concealed frame doorset range provides a solution to the age-old problem of achieving a flush, seamless door finish without the use of architraves or shadow gaps.

Arriva is a concealed frame doorset, made up of a steel two part door frame for single and double doors in gypsum board faced, metal or timber stud internal walls.

Features and benefits:

Plaster is feathered over perforated face of frame to produce a seamless appearance. The frame is fixed every 200mm to ensure it becomes part of the wall and removes the risk of cracking.
Eliminates need for separate lining board or architrave.
Suitable for construction of jib doors.
Suitable for 30/60 fire rated doors. Maximum door sizes apply.
Rapid, economic installation.
Durable edges.
Choice of door sizes available - dependant on fire rating.
Cold rolled, pre galvanized and annealed steel. Gauge: 0.86 mm. Coating: G90 (approximately equivalent to 90 g/m²).
Supplied by manufacturer cut to finished length, fitted with head joiner insert at corners, punched for hinges and strike plate.
Door width (maximum): 1000 mm.
Door height (maximum): 3000 mm.
For internal use only.

Door leaf size (maximum):

Where leaf size is specified, tolerances will be added by manufacturer. Actual maximum varies with door weight and number of hinges; consult manufacturer for details.

- FD30 (w x h):

Single: 1000 x 3000 mm.
Double (Widest available): 1015 / 1015 x 2030 mm.
Double (Tallest available): 825 / 825 x 2498mm

- FD60:

Single, wider variant: Widths of 901–955 mm have a maximum height of 2440 mm.
Single, taller variant: Widths of 900 mm or less have a maximum height of 2525 mm
Double, wider variant: Widths of 901–926 mm have a maximum height of 2440 mm.
Double, taller variant: Widths of 900 mm or less have a maximum height of 2480 mm.

Installation:

Screw frame through perforated face to edge studs at 200 mm centres (maximum). Double screw at ends and hinge points.

Arriva FD30 Field of Application Report