"waterproofing"

Products from F. Ball and Co. Ltd.’s System LVT range, including the company’s fast-track, fibre-reinforced transitional adhesive, Styccobond F58 PLUS, have been used to install luxury vinyl tiles in an ambitious, modern self-build property in rural Cambridgeshire.Flooring contractors began by thoroughly vacuuming the building’s concrete subfloor to remove dust and debris. F. Ball’s technical service team recommended treating the subfloor as a newly installed screed for the purposes of moisture management, despite being installed months earlier, as it had been left exposed to the elements since. Therefore, Stopgap F77 waterproof surface membrane was used to create a barrier to prevent excess subfloor moisture attacking adhesives and floorcoverings, potentially causing floor failure.Once the waterproof surface membrane had cured, the surface was primed using Stopgap P141. Stopgap 300 HD heavy-duty levelling compound was then applied over the entire ground floor to create a perfectly smooth base for the receipt of floorcoverings. The product’s high compressive strength and excellent self-levelling properties help create a flawless finish when installing LVTs, while ensuring a long-lasting, aesthetically pleasing floor finish even when subject to high levels of wear.The contractors then used Styccobond F58 PLUS and Styccobond F49 Hybrid PS temperature tolerant, moisture resistant, pressure sensitive adhesive to install wood-effect LVTs over the 372m2 area. Styccobond F49 was used where floor-to-ceiling windows were likely to cause temperatures to rise significantly as a result of solar gain.Styccobond F58 PLUS was used to install vinyl tiles everywhere else. The fast-track adhesive enables floorcoverings to be installed from as little as five minutes after application, transitioning from a wet-lay adhesive to become fully pressure sensitive. Reinforcing fibres in the formulation provide resistance to lateral movement, holding tiles firmly in place and reducing the potential for them to slide around when working. The adhesive’s high bond strength and strong initial tack also prevent excess adhesive oozing between joints, facilitating easier application.All of the products used in this installation feature in the F. Ball System LVT range: subfloor preparation products and adhesives which, used in combination, can help achieve optimum results when installing LVTs.Commenting on the project, Richard Argyle of 4 Floor Fittings, said: “It’s the best screed I’ve ever done. The levelling compound had no imperfections whatsoever. Styccobond F58 PLUS allowed floorcoverings to be installed over large areas in one go while helping with the precise alignment of LVTs. The result is a visually striking finish in keeping with the rest of the project.”

Derbigum + BluRoof = Sustainable Drainage Solutions Mitigate your risks with Alumasc BluRoofs Think Stormwater Management - Derbigum BluRoof SolutionsA 5-minute hop from Cardiff Queen Street and you’ll find the first blue roof in Wales. Upon what was formerly 1960’s office accommodation the Cromwell House site has been transformed into an 8 storey, 120-bedroom easyHotel with a rooftop stormwater management system. OUR DESIGN PROCESSOur clients at Carter Lauren Construction were interested in learning about the benefits of a blue roof to meet planning conditions. ” Working in a compact city centre environment where ground attenuation was not possible, it made sense to install a blue roof. The Alumasc team demonstrated how their BluRoof System attenuates stormwater via controlled discharge over a 24-hour period at roof level.” Kevin Jenkins, Surveying Director, Carter Lauren Construction. CLIENT BRIEF AND DESIGNWorking closely with the appointed consulting engineer and architect, our team of technical experts designed a solution for stormwater attenuation to comply with planning and meet all other project objectives. Alumasc’s Matt Davies, Area Technical Manager - Mid, West & South Wales commented, “Given the urban location, the Alumasc BluRoof system was the perfect fit in providing a fully warranted single-source waterproofing and sustainable drainage solution.”The Alumasc technical team provided a full specification service and specialist drainage design using key data from the project brief. By incorporating our BBA Accredited Derbigum APP polymer modified bituminous waterproofing system the longevity of the total solution is assured with a proven track record since 1967. Other key components comprise of a BluRoof geotextile filter fabric, BluRoof interlocking void former, flow control outlets, and overflow system.ENVIRONMENTALLY FOCUSSED SOLUTIONExtreme weather events are now the new normal, says the World Meteorological Organisation. Our rainfall patterns are becoming increasingly unpredictable, and we must plan accordingly to adapt the built environment to help alleviate flood risk. PARTNERSHIPWorking with the contractor to construct the first blue roof in Wales. Kevin Jenkins, Surveying Director, Carter Lauren Construction, “Matt and the Alumasc team were available throughout the design and installation process. We knew that installing the BluRoof by Alumasc was the right decision for the future of the easyHotel and the benefit to reduce pressure off the drains.” SAFETY PERFORMANCEThe easyHotel has a 35-year warranty for the works and life expectancy of up to 50 years.ABOUTEasy Hotel Cromwell House, Cardiff - Wales’s first blue roof. Completion: Spring 2021 Main Contractor: Carter Lauren Construction Architect: Axiom Architects 

Soundsure 560 was laid over concrete blocks (1350 kg/m3 from Lynx Precast), installed as an acoustic resilient layer below insulation, underfloor heating pipework and 75mm sand / cement screed. Installed in first floor areas of all 8 houses. Soundsure 560 was overlaid with 30mm insulation, a waterproof membrane, and underfloor heating pipes clipped into place. A 75mm sand / cement screed was then laid above. Soundsure 560 was lapped up all perimeter edges, ensuring that the insulation and screed were isolated from the main structure, providing maximum acoustic performanceBenefits of Soundsure 560 • Cost-effective acoustic solution for use with all types of floor screeds. • Exceeds the performance standards required in the UK building regulations for sound insulation. • Ideal for use in New Build Houses, as well as Apartments and Hotels, where acoustic insulation is required. • Excellent acoustic performance from Soundsure 560 – gives 24 dB impact sound improvement when used below 75mm sand / cement screed. • Quick and easy to install without any need for perimeter edge strips. • Provides long-lasting durability and high levels of acoustic performance. • Can be used as an alternative to Robust Details. • Made from recycled rubber crumb.

Owner: Aberdeen Asset Management Principal Contractor: Cemplas Waterproofing & Concrete Repairs Ltd Main Products Used: EMSEAL SJS systemCemplas has recently completed repair works at the Elmsleigh Shopping Centre in Staines, which included the replacement of deteriorated and failing mechanical movement joints in the service decks. The Centre’s retail units are supplied via ramps to these service decks, which carry the delivery traffic above the stores, plus the decks are also used for car parking, meaning that in addition to being fully exposed to weathering, they are subject to almost continuous dynamic loading from traffic up to and including heavy articulated HGV’s. Unfortunately, despite past attempts at repair and resealing, there had continued to be water ingress through these joints, both into the structure and into the retail units that are directly below, resulting in disruption, damage and cost for everyone involved. The innovative Emseal SJS system that includes integral cover plates, but with no mechanical fixings required, was selected by the Project Engineers as being ideal to accommodate the necessary movement, seal the joints and withstand the traffic loadings. Additionally, as access was only required from the top deck to install the Emseal SJS System, Cemplas was able to carry out the works quickly and keep disruption to an absolute minimum.

The roofs of The Dungannon & South Tyrone Borough Council offices had fallen into a poor condition and a large amount of standing water was threatening to leak into the offices below. With the office roof areas in such a poor state, the council turned to Polyroof to refurbish nearly 1,000 square metres of roof, split into 13 areas, before they fell into a further state of disrepair. DTL Construction, a local Polyroof Approved Contractor, were tasked with installing the Protec System, removing the issue of standing water and giving the roof a long service life, whilst giving the council peace of mind that leaks would not pose an issue in future.The standing water was cleared before the existing roof materials were stripped back in order to install the new system. This allowed a new warm-roof system to be installed, along with new cut-to-falls insulation. Polyroof’s Protec Cut-to-Falls insulation is an innovative two-layer system which doesn’t only improve thermal performance, it also directs standing water away from the roof.Following this, the BBA-approved Protec system was used to seamlessly waterproof the entirety of the office roofs. The system, once inspected by Polyropof’s Technical Services team, was issued with a 20-year guarantee, so the client could now have reassurance their roof would last for decades to come.

The overall aesthetic appearance of this project was very important. Originally, traditional metal roofing was considered, but the client had reservations with possible noise issues and theft problems, and local planning constraints did not permit the use of traditional slate. So, Williams Roofing Contractors of Chandlers Ford were tasked in finding an alternative solution.Polyroof’s BBA approved 185 GRP System can replicate the look of metal sheeted roofing at a fraction of the weight and the price and, having no scrap value, is not prone to vandalism or theft.The contractor worked closely with the Polyroof Technical Department, the client, and the planners to produce a detailed specification for the project incorporating pre-formed trims to create a lead effect. The system was successfully installed within the project time frame and upon completion was given the usual insurance-backed 20 year guarantee from Polyroof Products Limited.Polyroof’s simulated metal finishes are achieved through the installation of Polyroof pre-formed GRP trims which are fixed to the deck or substrate prior to the application of the Polyroof waterproofing membrane. The project was nominated for the LRWA Roofing Awards due to the high level of intricate detailing that was undertaken and the care that was taken to ensure that all preformed profiles were fitted in balanced, parallel positions. The overall attention to detail by the Polyroof approved skilled operatives was first class.

Gent Sint-Pieters railway stationCHALLENGE Gent Sint-Pieters, the main railway station in Ghent, is undergoing a spectacular metamorphosis today. The listed main building, constructed for the 1913 World Exhibition, has to remain untouched. Behind the old building however the platforms, waiting rooms and the central passengers corridor are being entirely refurbished. Architect Voncke’s objective was to create a pleasant atmospheric site with a 35,000 sqm open and attractive central hall, broadened and completely covered platforms and renovated rails. Functional, well-designed and above all spacious! As the 12 rail tracks had to stay on ground level, the passengers alley was excavated to a lower level under the railroad tracks. This necessitated permitting considerable daylight to enter the underlying levels.SOLUTION Transparent canopies, featuring large glass sections and translucent floors were all designed with this purpose in mind. To gain even more light the architect chose RENOLIT ALKORBRIGHT for waterproofing the platform canopies. The six long rectangular platform blocks, differing in height, are interconnected and make one large roof. The white highly reflective RENOLIT ALKORBRIGHT membrane on top of the construction reflects the daylight through the high side windows. A clever way to add extra day-light to the underlying areas. 

The new £18.9 million Wallyford Primary School opened in February 2019.The school is the first of two to be built in the Wallyford area amidst the construction of 2,050 new houses in the area.Broxap were chosen to supply all external street furniture, cycle shelters and a Keep It Kool canopy.Products included a series of ‘Fallowfield‘ concrete seats which were dressed in Grey BG01 Dressed finish. FSC certified Hardwood Timber planters.Cycle parking is facilitated via Broxap’s Cambridge Junior Shelters with Sheffield Stands beneath.A waterproof Keep it Kool Shade Cairns sail was provided with a Moss Green coloured fabric. This was positioned above a bespoke steel framed bench featuring FSC hardwood Radial Slats, planed and sanded.Also provided in areas around the school were a series of Broxap Synergy 200 MDPE Recycle Bins with general waste and plastic bottles and cans indicators on alternate sides.Roddy Clark, project director for hub South East said, “We’ve delivered a first-class facility for pupils and staff alongside a range of benefits for the wider community. A great deal of work has gone into the design and construction of the new school and the feedback received so far has been extremely positive.”

Celebrating its 150th anniversary in 2019, St. George’s Weybridge – a Roman Catholic private day school in Surrey – marked the occasion with the introduction of an exciting new architectural development.Transforming its existing, functionally simple sports hall into an inspiring, beautifully designed facility, the College’s accommodation brief comprised a premiership level hockey pitch and six-court sports hall, as well as a strength and conditioning suite, dance studio and flexible multi-use areas for group activities, meetings, presentations, exhibitions, open days and ‘match teas’.Designed by global architectural practice Scott Brownrigg, the architect’s vision was to create a contemporary and timeless building that would inspire students to achieve their very best.With plans including a stunning tree canopy-like roof structure draping over the internal spaces, the roof needed to achieve 30m clear spans across the main hall and the design needed to be clever and sensitive to the fact that the site’s location sits within the green belt. It also required a flexible and durable waterproofing solution to ensure the building leaves a lasting legacy for future generations of Georgians.Roofing:SARNAFIL G410-ELF lead grey.SARNAVAP 5000.120 M SARNATHERM G insulation board.SIKA SOLARMOUNT-1.

Slip-resistant steps for Villa ParkDegafloor were thrilled to be involved in the redevelopment of Aston Villa’s famous Villa Park football stadium. Slip-resistant steps were required for the Holte End of the stadium in addition to new facilities, including a new bar and suite complex.As part of the project, slip-resistant steps were required. The entire 600m² staircases were treated with Degafloor concrete crack seal, followed by a flexible waterproof membrane to deliver a impervious solution to protect the new bar and suite complex. The staircases were then finished with a bespoke Degafloor Quartz Trowelled with Aggregate System, finished in a unique Terracotta Quartz.To comply with current DDA legislation (Disability Discrimination Act) the stairs were finished with a separately formed nosing in White.Due to the tight project timescale and to overcome traditional British weather constraints, Flo-Dek (UK) Ltd recommended a range of fast curing Degafloor resin systems. As well as being fast curing, all Degafloor systems exhibit excellent UV resistance – essential for external environments – whilst the QTA system applied to the treads offers unrivalled slip resistance to ensure spectator safety, whatever the weather conditions.Speaking on behalf of Flo-Dek (UK) Ltd, Sales Director Dave Cope said, “This was a very complex and demanding project. The colours had to match perfectly and the hand formed nosings required a high level of skill and attention to detail”.

Project details: King Street in Hammersmith, a bustling city shopping street, popular for its variety of shops, restaurants and entertainment venues. At the heart of the highstreet lies Livat, which was previously known as Kings Mall before being acquired by IKEA's parent company Ingka Centres. Since the acquisition the centre has undergone a range of improvement works inside and outside to provide a more inviting and inclusive meeting place for locals.As part of the regeneration works, a brand new, first-of-its-kind IKEA showroom store opened, located in the newly refurbished Livat shopping mall. In addition, a separate cycling path has been built along Kings Street.Project challenges:Since there is considerable footfall along Kings Street, the requirement for street furniture meant it needed to be durable enough to withstand frequent usage, and also fit with IKEA and Livat’s branding.Project solution:Furnitubes’ Uniun seating and planter modules were the perfect solution - manufactured from fully recyclable rotationally-moulded LLDPE - a sturdy, thick and waterproof plastic. The solid material means scuffs will not expose any base material of a different colour, preserving the modules and keeping maintenance to a minimum.The Uniun seating and planters surround the entrances of the IKEA store and the Livat shopping centre, providing resting spots in between shopping trips and a welcoming place to relax for shoppers and locals alike.

HMS Caroline – Museum ship... CHALLENGE HMS Caroline, the last surviving vessel from the 1916 Battle of Jutland, now rests in the Titanic Quarter in Belfast. After a second life as floating Headquarters of the Royal Navy during World War II, this living legend will continue to serve the country as a museum ship. For this purpose, however, extensive restoration appeared to be essential. The key requirement on HMS Caroline was to avoid penetration of the deck surface. To safeguard its historic heritage against damage, the Royal Navy sought a reliable waterproofing solution. SOLUTION Versatile and impenetrable! What used to be the properties of this battle cruiser, happen to apply to the RENOLIT synthetic single ply roofing membranes as well. That’s why RENOLIT ALKORPLAN was heralded as the optimal solution for the refurbishment of the ship’s gun deck. The lead grey RENOLIT ALKORPLAN A provided an ideal modern day solution with an impressive finish. On top of a new layer of insulation board, the calendered and laminated fleece-backed PVC membrane was fully bonded with a combination of the RENOLIT ALKORPLUS81068 polyurethane adhesive and the universal RENOLIT DUALFIX81065 glue. RENOLIT ALKORPLAN stands out above the competition given its excellent weldability, simplicity of detailing and overall versatility. Once installed, ongoing maintenance of the membrane will be minimal with a predicted life expectancy in excess of 35 years (BBA approved). On 31st of May 2016 the freshly refurbished HMS Caroline stole the show as a fitting backdrop for a commemoration honouring its centenary. 

The flat roof area at above the vast Guernsey Power Station had been suffering from water ingress as a result of failings in the existing EPDM membrane. Due to the expensive machinery housed within and the potential for widespread and costly disruption should the leaking continue.Guernsey Electricity turned to Sarnian Roofing Limited, a Polyroof approved contractor, to provide a rapid and effective waterproofing solution. The Protec System was specified, and work began quickly.The SolutionRemoval of the failed roof coverings to expose the concrete deck below began, and the BBA-approved Protec 20-year system was installed directly to the concrete. Due to its RapidCure technology, the system cures within 30-60 minutes, meaning less disruption for the client.The Protec System provides an flexible and seamless membrane that eliminates the risk of water ingress around penetration points common in industrial unit roofs. As the system is cold applied, there are none of the safety risks associated with the open flames and hot torches used with traditional roll-applied systems.Polyroof’s reputation has been built on the high level of technical support provided to clients before, during and after every contract.We like to work closely with our clients from the very beginning of a flat roofing project right through to completion and throughout the lifespan of the roof. From our experience, this is the best way to guarantee that all aspects of the roof are finished to the superior standards that our clients expect.

Commercial to residential, it may be last orders for some of our great British pubs, for other’s its discovering exciting ways of transforming commercial structures into luxury residential dwellings.  The growing trend of converting old inns offers new homes a unique history whilst being packed with character and features.Delta Registered Installers, Advance Property Preservation Ltd were engaged to assist on a troublesome vaulted basement to a property, based in central London which had already been converted into high living accommodation.Just off the basement area were two large vaults around 12m long. Made from brick barrel construction, this below ground space had previously used for storing kegs of ale!One of these vaults had previously been converted into a spa area with jacuzzi and steam room, the other was used as a storage area. The owners had previously had the storeroom tanked with a Type A, render system, however this approach repeatedly failed, allowing for substantial water ingress which was causing damage to items stored in this area.With Structural Waterproofing one of the major contributors to project failure lies with the design. When hiring contractors, ensure the design, procurement of materials and installation is undertaken by one specialist will naturally reduce these known and associated risks. A specialist contractor will always be able to offer quality assurances.

Private house, Jersey CHALLENGE Glulam beams – or glued laminated timber – are an ideal light weight alternative for steel or reinforced concrete that allow for much longer spans, heavier loads and complex shapes. Over the years timber rot may occur to such a degree that renovation becomes imminent and irreversible. That’s exactly what has happened to the property of a Jersey customer of RENOLIT’s approved contractor Advanced Roofing. A solution was sought to “save” the existing Glulam beam structure without too many structural changes. SOLUTION The RENOLIT ALKORPLAN roofing contractor solved the problem as follows: For the first stage they removed the failed, rotten areas and treated the remaining areas for insect infestation. Then they covered the glulam beams at each change of direction with RENOLIT ALKORPLAN metal sheet. Over the metal the beams were completely wrapped in reinforced RENOLIT ALKORPLAN membrane. Nicely packed… and completely waterproof. It worked really well and actually quite an ingenious idea! The glulam beams can start a second life resistant to all weather conditions. Once the glulam beams were encased there was still the issue of the solar shading to be re-fitted. Preferably without having to penetrate the newly applied membrane! The brilliant idea of using RENOLIT ALKORSOLAR profiles welded to the top edges of the glulam beams as a safe and solid support for the solar shading evolved. This project is again an excellent proof of the versatility of our RENOLIT ALKORSOLAR mounting system.

Client: Meggit Avionics, Fareham Design & Build Contractor: Metpark Specialist Contractor: Thelwell Flooring Main Products Used: Emseal DSM SystemMeggit Avionics produce flight data sensors, systems and displays for all types of civil and military aircraft, including helicopters and unmanned aerial systems (UAS) drones. At the firm’s expanding facilities in Fareham, their success meant that they needed to find a way to provide more parking for the growing number of people working on the site. The solution was provided by Metpark UK, in a complete car park design and build contract, that provided a whole new parking level, raised and built directly above their existing surface car park, which added a further 63 parking spaces. This included a new structural steel frame, with steel access stairs, perimeter crash barriers, and lighting, plus composite steel and concrete decks with waterproof deck surfacing. The structural design used 40mm wide expansion joints brought right through the composite deck to allow the anticipated high joint movement capability required, which was up to +/- 50% (i.e. total 100%). The Emseal DSM system was selected and used to securely seal the exposed expansion joints as it can easily meet and accommodate all these requirements. Emshield DSM is a prefabricated movement joint that is easily installed from above, so other trades can continue uninterrupted below. Additionally it is bonded into position with a structural epoxy adhesive, so there is no potentially damaging drilling required into otherwise sound concrete elements of the new decks.

Lightweight but very strong mounting profileCHALLENGEStraight lines, maximum light and a unique, remarkable design. This is how independent architect Lieze Vandael saw her own home. Due to the numerous voids and imposing windows up to 9 meters high, a traditional construction method was certainly not an option. A suitable alternative had to be found. Moreover, Lieze Vandael wanted to see the elegant, minimalist architectural style with straight lines envelop the building: a roof and façade finish in the same material - preferably timber - and moreover, seamlessly blending into each other. To have the building completely wrapped in wood. Definitely a real challenge! A neat and watertight connection between roof and façade is not an easy job at all. Besides, timber is never completely waterproof. So, the challenge for Lieze Vandael was to combine the roof and the façade into one uniform surface, ensuring a perfectly watertight roof.SOLUTIONArchitect Vandael wanted to step away from the traditional lightframe wood structure, and opted for an alternative mass timber construction: a load-bearing construction formed from tongue and groove stacked solid wood beams. After all, this type of construction creates a lot of possibilities and is, besides, a more durable and ecological solution. For the exterior finish of the building the architect chose thermowood Ayous, a knot-free, clear-grade exotic hardwood providing excellent durability. The façade was finished with thermowood in a traditional way. Finishing the roof, however, was a more complex task. Cladding a roof with timber, particularly a highly sloped roof poses a substantial risk. How to achieve a watertight roof?

Friesland Campina CHALLENGE An absolute must for refrigerated warehouses or dairy processing facilities is to try to keep the building as cool as possible and to avoid all causes of heat, in order to keep the cooling costs as low as possible. Some decisions can have detrimental effects though. Mechanical fixing of the roofing membrane for example, in case the wrong fastenings are used. Thermal bridging may cause cold – or in this case heat - penetrating through the flat roof fasteners resulting in higher energy bills. And, quite important as well, mechanical fixing will perforate the vapour control layer, which in the case of cool buildings sits uppermost on the insulation. The result being moisture-related damage to the insulation! Furthermore, it has also been proved that the darker the roofing membrane, the less the sunlight will be reflected, the more heat will be absorbed. Again resulting in escalating energy costs. Waterproofing a cool storage warehouse is definitely not easy! In this regard Friesland Campina were looking for a durable and ecological roof solution for their brand new refrigerated distribution centre in Maasdam. SOLUTION RENOLIT came up with the perfect answer: the RENOLIT ALKORBRIGHT cool roof membrane. Here’s why! RENOLIT ALKORBRIGHT is a completely white PVC membrane reflecting the sunlight up to 90%. Absolutely the highest solar reflectance rate ever. Thanks to this membrane, which prevents the interior from warming up, there will be no extra air conditioning expenses. In addition, an extra protective coating makes sure less dirt sticks to the roofing membrane. This layer will in turn help to maintain a durable reflection. 

Specialist floor levelling compounds and adhesives from F. Ball have been used to install a mixture of hard-wearing, stylish textile and vinyl floorcoverings at Hampton School in South West London. Starting in the sixth form areas, flooring contractors made a feature of the long and narrow atrium by mirroring the footprint of the mezzanine floor overlooking the breakout area onto the floor below, using a 50/50-split of Calgary Cement and Grey Forbo Flotex carpets.To achieve this, the old fibre-bonded carpet in the 250m2 room was first removed, revealing a sound, dry, concrete subfloor, which was primed using diluted Stopgap P131 general purpose primer before the application of Stopgap Green Bag levelling compound. Once the levelling compound had cured, Styccobond F44 acrylic adhesive was used to secure the PVC-backed carpet. Over in the maths’ corridor, contractors had to remove fibre-bonded carpet tiles affixed to wooden parquet blocks, leaving behind old bitumen adhesive residues. To prepare the subfloor, Stopgap 1200 Pro levelling compound was applied. Once cured, Stopgap F77 waterproof surface membrane was applied as a moisture test had indicated the presence of excess subfloor moisture, with relative humidity levels exceeding the 75% threshold for the project to progress without a moisture management solution.Next, Stopgap P141 primer was used to promote the adhesion of a subsequently applied second layer of Stopgap 1200 Pro. Finally, the 100m2 area was finished with wood-effect luxury vinyl tiles. 

Crossley Webb Contracts Ltd have specialised in providing exceptional quality interior refurbishments and fit-outs for the past 16 years. They were tasked to fully refurbish 14 hotel rooms and bathrooms located at the Bannatyne Hotel Durham. They required a product that was quick to install but equally had a desirable look.CWC specified Bushboard Nuance wall panels, Bushboard’s Nuance is a unique wall panelling system that is 100% waterproof, extrusion free and can be installed in a matter of hours offering a wide choice of stunning designs and textures to create any bathroom the client wishes.OBSERVATIONS‘Bushboard were recommended to CWC through a regular client and after thoroughly researching the product we decided to use it due to it’s practicality.It is the ideal product for refurbishment and fit-out projects as working to tight deadlines means we need to have the flexibility for quick installation. Nuance meets this requirement perfectly.’Bushboard panels can be tailored and installed in a matter of hours. In Bushboard’s time trials, Nuance was up to six times faster to install than traditional tiles. For a project Nuance is perfect to cut down the disruption.OUTCOMECWC specified Driftwood, this decor is printed in life-like proportion and enhanced by a realistic texture, mirroring the beauty of real wood.‘We loved working with the product and our clients think the overall finish looks outstanding. The product is hard wearing and easy to install, along with a great modern and stylish look.We will definitely use Nuance panels again on future projects.’For more information about the Bushboard products, request a RIBA CPD,

This amazing swimming pool refurbishment project in Knutsford, Cheshire was undertaken by Abstract Pools Ltd. Tiles from Designworks and more than 100 JACKOBOARD® construction boards were used.Manufactured with an extruded polystyrene (XPS) foam core and a special coating on both sides, JACKOBOARD® construction boards form an ideal base for tiling. The surfaces of the JACKOBOARD® system provide an extremely strong bond and can be used on virtually any substrate. The boards are waterproof, thermally insulating, truly lightweight and very strong. This combination of characteristics makes them ideal for pool hall work. The result of this refurbishment is absolutely stunning and the owners of the property are delighted unsurprisingly.The owner was abroad while the renovation was carried out. The pool was situated in the basement of the house and had been left empty for a few years. The contractor was tasked with refurbishing the pool hall and bringing it back to life. They stripped everything back to the existing substrate, and then rendered and screeded the pool itself, the jacuzzi and the pool surrounds.A new steam room was added, using JACKOBOARD®. All of the pool hall walls were lined with JACKOBOARD®, ready to receive tiles. All tiles on this project were supplied by Designworks Tiles, the specialists in tiles and mosaics for swimming pools and spas. The tiles used on the project were Ezarri Lisa Black Mosaic for the pool tank, District Grey 1200x600x10mm for the pool hall walls, District Dark Grey for the pool coping tiles and District silver 600x600x10mm for the pool floor surround

Car park refurbishment for Dublin City UniversityMcKeon Construction Limited, were looking for a durable and innovative resin waterproofing system for one of their clients, Dublin City University (DCU). The university required car park refurbishment to a multi-storey car park where the existing deck coating had started to fail.McKeon discussed the client requirements with Larsen Contracts (Ireland) Ltd, a specialist resin contractor. Larsen recommended the Degafloor Top Deck System for the car park refurbishment.The Degafloor Car Park Top Deck System is designed to offer the outstanding flexibility and performance required for top decks of multi-storey car parks. The unique formulation allows installation to occur extremely quickly, with the main system of 23mm being installed in a single application process.The project was completed according to specification, within budget and on time. DCU and McKeon Construction Ltd are delighted with the results and the numerous benefits that the Degafloor Top Deck System has delivered, including: outstanding durability, flexibility, a totally seamless and impervious finish, exceptional slip resistance and visually pleasing aesthetics.Eddie O’Brien of Larsen Contracts Ltd commented: “The Degafloor Car Park Top Deck System enabled us to complete the installation within the short window of time available (weather wise). Traditionally, we have been unable to complete car park projects outside of summer months due to weather and temperature constraints, but this new system has made it possible for us to complete car park installations all year round.”