NBS Source
List your products

waterproofing

1,838 results found

Sort by:

Showing 1-36 of 344

Newton 104 Crystalline Waterproofing Of Concrete

Newton Waterproofing Systems

Newton 104 is applied to the surface of concrete to provide in-depth protection against the movement of moisture through the capillaries and hairline cracks within the concrete. It consists of Portland cement, specially treated quartz sand and a compound of active chemicals. Newton 104 is supplied in powdered form and is either sprinkled onto fresh concrete or is mixed with water as a carrier and brush applied as a slurry for application to fully cured or older concrete or vertical surfaces.

Newton Complete Guide To Waterproofing 2018

Newton Waterproofing Systems

The Newton complete guide to waterproofing includes solutions for new and existing structures. It is comprehensive, includes case studies, product information, the British Standard requirements, grades and types of waterproofing, combination systems, as well as technical help and advice.

Newton 107F Cementitious Flexible Waterproofing Membrane

Newton Waterproofing Systems

Newton 107F is a two-component, cementitious, polymer-rich coating for the waterproofing and protection of concrete and masonry. Capable of withstanding heads of water pressure to 10 bar, both positively and negatively. Newton 107F is ideally suited to the waterproofing of reservoirs, tunnels, water tanks, basements, podium decks, at roofs, balconies and terraces, and is especially capable where the structure has both masonry and concrete elements where differential movement is expected.

Newton 308 Stopaq Service Duct Waterproofing

Newton Waterproofing Systems

Newton 308 Stopaq is a single component highly flexible compound used for the sealing of conduit and pipes through service duct sleeves. The product is incredibly effective at sealing around numerous services within the sleeve, even where significant water ingress exists. The unique compound never cures, remaining permanently flexible, allowing for new services to be simply pushed through the existing repair and resealed.

Newton 110 WATstop Cement Waterproofing and Surface Repair

Newton Waterproofing Systems

Newton 110 WATstop is a three-component, fibre-reinforced cement/epoxy product that, when mixed, produces a workable mortar suitable for surface repair and surface smoothing. With the addition of up to 40% water, a paint/slurry-like consistency can be achieved that is suitable for numerous applications including the damp proofing of walls and slabs and the waterproofing of concrete structures, as well as being a primer for a number of Newton System 100 Liquid Waterproofing products.

Newton 109-LM Flexible Rubber Waterproofing Membrane

Newton Waterproofing Systems

Newton 109-LM is a flexible, single-component, cold-applied, seamless rubber waterproofing membrane with a number of uses for the external waterproofing of basements, foundation walls, decks, and flat roofs. Newton 109-LM is also adept as a detailing membrane for the termination and jointing of other Newton waterproofing products, and with its very high adhesive properties it is the perfect primer for adhesion of butyl products to concrete and mortar. Applied by brush, roller or airless spray machine, Newton 109-LM can be applied in cool and damp conditions and without a primer.

NEWTON 103-S High Performance Liquid Waterproofing Membrane

Newton Waterproofing Systems

Newton 103-S is a two component, thixotropic, cementitious modified polymer waterproofing membrane with high adhesion, designed for the internal and external waterproofing of concrete and steel elements of water-retaining and water-resisting structures such as reservoirs, water tanks, below ground structures, podium decks and parking areas.

Newton 106 Highly advanced single component liquid waterproofing

Newton Waterproofing Systems

Newton 106 FlexProof is a highly advanced, single component, waterproofing compound for the waterproofing of joints that is supplied in two variants: Newton 106 FlexProof-X1 is a highly viscous, thixotropic paste that is suitable for the waterproofing of construction and vertical movement joints, whilst Newton 106 FlexProof-NV has a lower viscosity and so is pourable and better suited where the application is to horizontal movement joints. Both variants form an elastomeric polymer that is rainproof in minutes and capable of handling severe building movements and deformations.

Newton 108 HydroBond-LM Sprayable Rubber Waterproofing Membrane

Newton Waterproofing Systems

Newton 108 HydroBond-LM is a cold spray-applied, seamless, rubber waterproofing membrane for the external waterproofing of basements and foundation walls. Normally specified as part of our HydroBondTM System in conjunction with Newton 403 HydroBond, the membrane can also be used on its own, terminating to raft or strip foundations. 108 HydroBond-LM is very quick to apply, at up to 1000m2 per day, and is not subject to the delays normally associated with liquid membranes as it can be applied in cooler and damper conditions and in most cases without a primer.

HR Wallingford waterproofed by PUDLO

PUDLO Waterproof Systems & Cemfree Zero-Cement Concrete, part of the DB Group Ltd

Built at a cost of £3.5 million, the 11,200m2 Froude Modelling Hall, named after the Victorian pioneer of hydraulic scale modelling, extends the world-class test facilities at the UK headquarters of leading engineering research specialist, HR Wallingford. The purpose-built and environmentcontrolled hall contains a series of state-of-the-art wave flumes, basins and tanks for the physical modelling of structures and hydraulic features.

PUDLO Waterproof Concrete Brochure

PUDLO Waterproof Systems & Cemfree Zero-Cement Concrete, part of the DB Group Ltd

The PUDLO System provides the highest standard available of watertightness, hydrostatic pressure resistance, and ease of construction. With an unrivalled global record of product performance in service spanning 130 years, the PUDLO system has been continually specified where watertightness and corrosion resistance is critical, and moisture leakage is not an option.

PUDLO waterproofs Kings Cross, the Triplets

PUDLO Waterproof Systems & Cemfree Zero-Cement Concrete, part of the DB Group Ltd

There are only a handful of gasholders remaining around the UK, most of these hulking structures have been demolished to make way for new developments. They may not be everybodys idea of beauty, but gasholders are a rapidly disappearing reminder of our countrys proud Victorian heritage; so its rather refreshing to see that the cast iron frames surrounding four of Londons Kings Cross gas holders are being saved and re-used in a huge, new, mixed-use Argent development. PUDLO has been involved with this project from the design phase and, since the basement construction phase commenced. The PUDLO onsite guidance has proved valuable along the way for the podium deck, basement car park and lift pits which are all being poured using PUDLO concrete.

Royal Albert Hall waterproofed by PUDLO

PUDLO Waterproof Systems & Cemfree Zero-Cement Concrete, part of the DB Group Ltd

PUDLO concrete additive has played a vital waterproofing role in the major extension and refurbishment programme at Londons Royal Albert Hall, which was completed in 2004. The terrace of steps leading from the Albert Hall to Prince Consort Road was excavated to provide an underground car park, storage and air handling equipment and offloading facilities with direct access through a tunnel, to the performing arena within the Albert Hall.

Precast waterproof concrete at Vauxhall Tunnel

PUDLO Waterproof Systems & Cemfree Zero-Cement Concrete, part of the DB Group Ltd

The construction of a pedestrian tunnel beneath Vauxhall Bridge, using precast box culverts, required PUDLO as a high performance waterproofing and corrosion-resistant solution in order to meet the aggressive saline soil conditions in the Thames tideway. PUDLO was used in the casting process primarily as a waterproofing agent, but also as additional protection against the corrosive effects of the soil, as described in BRE Digest 363 Concrete and Concrete Products in Aggressive Ground.

PUDLO waterproofs Basildon Sporting Village swimming pool

PUDLO Waterproof Systems & Cemfree Zero-Cement Concrete, part of the DB Group Ltd

Public construction is always subject to close scrutiny, especially during times of austerity cuts and economic recession. Whether procurement is via public or private initiative, local authorities are in search of long-term value for money, starting with high quality design and durable construction. Basildon Sporting Village is no exception. The largest sports project in the Thames Gateway development, the Village provides state-of-the-art facilities for sports, leisure and education on 250 acres at Gloucester Park, Basildon. The multi-million pound, 25-year PPP contract was awarded by Basildon Council to Community Solutions for Leisure, with Morgan Sindall Plc as main contractor.

Waterproofing Excellence

FIS Products

Download to view key information on recent projects which have used Premcrete Waterproofing systems and the Design and warranty services by FIS Products. Premcrete Waterproofing systems are used on all types of buildings including: Commercial Education Leisure Retail Residential and Luxury Residential If you have a project you'd like to discuss with us, please get in touch on 02380 276166

Waterproofing Redefined

FIS Products

This document explains exactly how FIS can help you in terms of design and warranty of structural waterproofing and gas protection systems.

Hydrocrete Waterproof Concrete

FIS Products

The Premcrete waterproof Concrete has been used on many varied Structural Waterproofing projects. It is used with the Cemflex, Hydrobar or Hydrostop waterbars.

Tunnel Waterproofing Systems

Soprema UK

CivilRock® is a range of SOPREMA products designed to support the requirements of civil engineers for all types of structures including tunnels, underground and basement structures, bridges, car parks and much more.

Drainage & Waterproofing Brochure

Wallbarn Ltd

Drainage Channels for surface drainage; dimpled membranes for cavity drains and subterranean drainage; pre-formed outlet connectors for fully waterproofed and protected drainage and water management systems.

Waterproofing Solutions Brochure

Briggs Amasco Ltd

For over 150 years Briggs Amasco Ltd originally founded by William Briggs in Dundee, have been providing a service to the Waterproofing Industry, based on their technical expertise, contracting skills and customer service. Today BriggsAmasco are part of the international IKO Group who are one of the world leaders in waterproofing, with manufacturing plants in the USA,Canada and across Europe. In the UK, the group companies manufacture and supply a complete range of bituminous, mastic asphalt, single ply, liquid roofing and ancillary products to the roofing market, all of which are installed by BriggsAmasco. With 10 strategically located branches across the country, BriggsAmasco can truly supply a One Stop Shop for the most complex roofing projects.

Screedsure Waterproofing Membrane

CCL Wetrooms

Screedsure is a copolymer self-adhesive waterproofing membrane specifically designed for use onto screeded and other solid floors. Developed for use in bathroom, wetrooms and similar wet areas, Screedsure comprises a 1mm butyl based membrane with a fabric top layer providing an excellent surface for the adhesion of natural stone, porcelain and ceramic tiles.

Showing 1-36 of 344

Feedback