"stone"

DCM Surfaces were thrilled to be part of the ‘Lord of the Rings’ inspired playground at St Thomas’s School in Clapham.Blue Forest were the successful bidders in the contract for the play area, which included rope bridges, winding log walks, monkey bars, clamber nets, sunken tyre stepping stones, and a draw-bridge. As a long-standing customer, Blue Forest approached DCM to provide a natural looking surface which would complement the timber-style play equipment.Following the successful completion of the project, DCM has since worked with Blue Forest to install the play surface at Thomas’s Clapham sister school, Thomas’s Battersea, before the enrolment of Prince George in September.The Project Manager at Blue Forest commented:“From the office staff to the on-site installers, DCM worked hard to accommodate our requirements. They were punctual and remained until the job was done. Their quality of work is second to none and I would have no trouble recommending them.”

St Bronagh’s Primary School in Rostrevor, County Down was a newly built school designed by Donnelly O Neill Architects Ltd and constructed by Ganson Building & Civil engineering contractors Ltd.The £3.9 million school was crowned with the Sustainability award in May 2018, replacing the former Convent of Mercy Primary School. This was demolished to make way for this new 7x classroom building, along with the construction of a new youth club building, sports hall, community and games room, and additional accommodation.Upon handover and occupancy, it became apparent that there was scope for improving the acoustic conditions within the new building.The school design itself, was made up of 7x ‘pods’ all of varying heights and reverberation within these areas was an acoustic concern. Working with the Project Architect Paul McMahon of Donnelly O Neill Architects Ltd, we identified that significant improvements could be delivered with the installation of 425 m2 of our Hush Absorber 50 panels to classrooms and resource areas.For practical and aesthetic reasons as well as meeting the required reverberation times, we supplied 286x Hush Absorbing Notice Boards in a neutral colour with a bespoke frame colour to ensure that they blended in with the existing décor.In certain areas we were asked to create a feature wall with the panels and so we used our Hush Absorber 50 panels which were provided in 4 vibrant colours to create both a statement to the chosen rooms as well meeting the required reverberation time.We also provided 3x large printed 50mm panels at high level within the staffroom. These panels were printed with an image of the Cloughmore Stone as requested by the school. The Cloughmore stone is significant to the area and is a giant 50 tonnes granite boulder that sits high above the village of Rostrevor.As well as creating a tailored interior design, the sound absorbing panels provide a practical and efficient way of dampening sound reverberation and eliminating echoes within the rooms.We worked closely with our stockists Commercial Connections in Crossgar, County Down to ensure both site presence and swift responses to technical and installation queries were met. Ganson UK and Hush were able to ensure that all material was supplied over an 8-week period to meet the time frames on site.A multitude of sustainable elements has made this school a successful build and getting the acoustics right has significantly contributed to the school’s success.

Job: New Lidl Store, BlythSmet Supported Partner: Plunkett Tiling ContractorsSMET Product Used: Sopro RS 648 Vibration SlurryRelated DownloadsTDS Sopro RS 648 Vibration SlurrySmet Professional Tiling Systems BrochureDescriptionSopro RS 648 Vibration Slurry was selected for the LIDL tiling system method of vibro-compaction fixing of porcelain floor tiles, in the Blyth LIDL. Smet Supported Partner, Plunkett Tiling Contractors, selected the superior quality German-made, RS 648 Vibration Slurry, for its flexibility as a bonding slurry for the installation of stone and ceramic coverings, making it ideal for use in vibrated floor systems (or indeed conventional methods).In preparing the floor to LIDL spec, the floor screed is placed, struck off to required levels, and pre-compacted using a straight edge. The bonding layer, namely Sopro RS 648 vibration slurry is applied to prepared and pre-compacted floor screed and ceramic tiles are immediately placed with tightly butted joints to LIDL spec.After installation of a vibratable area (10 – 20 m², depending on situation/ambient conditions and resultant setting behaviour of floor screed), a surface vibrator is passed over floor covering and tiles vibrated into adhesive bed. When sufficiently set, hardened and bonded joints are grouted*.Sopro RS 648 Vibration Slurry is a one-component, fibre-reinforced, polymer-modified, trass-bearing, cementitious bonding and contact slurry. Applied as flexible bonding slurry for installation of stone and ceramic coverings using vibrated floor system or conventional methods. It’s ideal for slurry application technique. Sopro RS 648 is particularly suitable for laying tiles with low water absorption (fully vitrified stoneware). For laying large-format units (30 cm × 60 cm) using vibrated floor system. Also, it can be used as slurry-applied bonding layer on substrates and on bedding adhesive.The product's special properties and SMETs superior technical backup, are key factors in choosing Sopro RS 648 Vibration Slurry. Smet Building Products Ltd is committed to delivering high-quality products to the construction of LIDL stores.For more info on our range of SMET Professional Tiling Products.*We always recommend grouting with Sopro FL 526 Flexible Tile grout in the required colour.

A classic Parisian apartment is benefitting from the thermal effectiveness of the introduction of the innovative ultra-thin Spacetherm® WL insulation.Located in the 11th arrondissement in the heart of Paris on Boulevard Voltaire and overlooking the Place de la Republique, the two-bedroom, 135sqm apartment was built in the Hausmann style. Hausmann’s renovation of Paris was part of a major programme commissioned by Emperor Napoléon III in the late 19th century, resulting in the distinctive appearance of the wide avenues, parks and squares which have become associated with this beautiful city.Property owner Keirnan Murphy has made a significant investment in the renovation of the apartment to improve overall comfort, energy efficiency and to reduce heating costs.Keirnan explains, “The solid stone walls, whilst adding to the building’s charm, result in heating inefficiencies and higher heating costs. During summer the stone walls warm during the day, retaining and radiating heat throughout the night. In winter, the solid walls cool down leading to a huge increase in heating costs.We undertook lots of research on solutions for green and energy-efficient renovations. In the research, we considered products available within France and as well as those available internationally. The Spacetherm WL aerogel insulation from the A. Proctor Group was a perfect choice for the apartment. At just 13mm thickness, the Spacetherm WL fits inside the lip of our cornices, which average about 20mm. Typically the walls of these older properties are not completely flat and so the option of an ultra-thin insulation was critical. Most alternatives were thicker and would not have worked.We are very pleased with the results and we noticed that when leaning up against the Spacetherm WL you can feel your back warm against the insulation. The A. Proctor Group were extremely helpful in addressing all the questions from the architect and ourselves. They also provided comprehensive support and guidance to our builder on the installation.”Spacetherm WL is a high-performance laminate specifically designed to be fixed to the internal surfaces of existing solid walls without the need for mechanical fixings. Spacetherm WL consists of Spacetherm aerogel insulation blanket bonded to 3mm Magnesium Board (MgO), for use in applications where improved thermal performance is required with limited space.Typically, a solid wall will have a U value of around 2.1 W/m2K. Following the application of Spacetherm WL, this can be reduced to around 0.8 W/m2K, dependent on the wall structure.

Cellweb®TRP is a cellular confinement system specifically designed for tree root protection. The system creates a stable, load bearing surface for traffic or footfall whilst eliminating damage to roots through compaction and desiccation. The distinctive cell size, cell depth and cell wall perforations combine to create the tree root protection system.The Cellweb®TRP system comprises of the three specific elements, Cellweb®TRP, Treetex™ pollution control geotextile and an infill of clean angular stone.Features and benefits:Guaranteed cellular confinement system.Independently tested.No dig solution - loads placed upon it are laterally dissipated rather than transferred to the soil and roots below. Prevents sub soil compaction.100% success rate.Continued water permeation and gaseous exchange, ensuring that nutrient supplies to the tree roots are maintained.Prevents surface rutting; optimising long term performance and aesthetics of the final surface.Simple to install.Complies with BS5837:2012, APN 12 and Tree Preservation Order (TPO) guidelines. 

One Crown Place is the latest high rise addition to London’s skyline. Home to 246 luxury apartments, high-quality office space, a boutique hotel and members’ club, it is located between the City of London and Shoreditch. Designed by internationally renowned architects Kohn Pederson Fox (KPF), the development features two prismatic towers of 28 and 33 storeys.For the apartments, interior designers, Bowler James Brindley specified custom designed kitchens by Italian company Arclinea featuring a dark lacquered finish with engineered stone worktops and glass fronted cabinets.The Fire regulations which apply to high-rise living accommodation meant that the open plan kitchens in each apartment would require a fire suppression unit complete with sprinklers to be fitted. These units need to be installed and maintained by a specialist engineer and can also cause damage within a property should they be activated due to a fire.  Therefore, the team of architects, designers and builders were open to the idea of an alternative, unobtrusive design-led fire prevention solution, such as the Firechief Kitchen Stove Guard.

THE PROJECTThe NEW Fusion mailbox is the essence of innovation; this luxury development is in the heart of London and offers the ultimate elegance and style for its’ residents. Mivan Marine LTD approached The Safety Letterbox Company with a specific cutting-edge, design requirement for their mailboxes, SLB managed to interpret that design with such precision, the outcome was extraordinary and truly stunning.The new development on 48 Carey Street located just opposite the Royal Courts of Justice and the Royal School of Surgeons is a 10-storey block consisting of 1, 2 and 3 bedroom luxury apartments with underground parking and leisure facilities.THE PRODUCTSLB created a truly unique, high-end, brand new product for this luxury development in central London. Incorporating multi-point opening, anodised materials, exceptional engraving detail and Italian stone cladding, SLB was delighted to create such a beautiful and visually exciting arrangement, turning the client’s vision into reality.These mailboxes are recessed into the wall with front entry and front retrieval, arranged in 2 banks; the first configuration is 13 high by 10 wide, and the 2nd is 10 high by 10 wide.

A charming, contemporary style private villa with a swimming-pool in Gobelsbach in Germany was designed to create a large living solution surrounded by nature.Atlas Concorde outdoor floors of the Trust LASTRA 20mm collection give a touch of elegance to the outdoor spaces of the house. The outdoor flooring of the terrace of the villa mirrors, with harmony, the naturalness of the surrounding environment. The wood-look porcelain tiles have a rich and detailed surface that conjures up images of nature that is lavish and intriguing. The garden and the relaxation area develops into a sought-after outdoor space where even the smallest of details have been cared for, thanks to the presence of a large swimming-pool with shower and an outdoor living area. The stone-look porcelain tiles are the protagonists of the patios surrounded by the green facing the rooms of the house. The outdoor floors covered with Trust LASTRA in 20mm thickness and in size 45x90 permeates into the space with a surface featuring excellent technical performance, is safe, anti-slip and resistant to adverse weather conditions. The collection also includes numerous trim tiles that are suitable to clad swimming-pool edges, pathways and steps guaranteeing a coordinated project.

Surespan have recently completed the design and manufacturing of a large stainless steel hydraulic opening recessed floor door for a project in Sri-Lanka.The ProjectThe $850 million Waterfront integrated Resort (Cinnamon Life) is Sri Lanka’s largest and most iconic mixed development, located in the capital city of Colombo. Balmond Studio has designed and constructed the resort as a ‘city within a city’ offering two 5-star luxury hotels, offices, residences and premium retail and entertainment. They hope the resort will become one of the iconic and identifiable landmarks in Asia.The no-limits project is symbolic of Sri Lanka’s ambition, drive, and growth. The ProductSurespan were approached to manufacture the hatch to suit an opening of 6.5m by 4.1m and capable of withstanding a slow-moving wheel load of 10kN/m2. The pan-type door will be re-cessed for receiving 30mm of Natural Stone Slab infill with an approximate infill weight of 2 tonnes.Features The largest recessed floor hatch has been manufactured to provide a theoretical sound reduction of 45dB. To assist with installation, lifting points were designed to the frame exterior.

THE PROJECTAs part of it’s recent £100 million pound renovation, Roché Awnings were tasked with providing a shading solution which was in keeping with the hotels iconic features, whilst covering the width of their ground floor terrace. The terrace being the location for the hotel’s east smoking terrace, central loggia door entrance and private outdoor dining area.THE SOLUTIONThe challenge was to choose an awning which blended in with the style of the Edwardian building. Originally designed to incorporate the Markilux 730 drop arm awnings, we advised the hotel to choose the Markilux 3300 awnings due to it’s unique design. The awnings were mounted to the buildings stone facade and sit inconspicuously below the hotel’s balustrade. The helped the awning merge beautifully into the architecture of the building.Roché coupled Markilux 3300 full cassette patio awnings to achieve widths of close to 10 and 13 metres, along with a smaller width of close to 3 metres. The awning was installed green fabric, traffic white cassette and uniform awning projection. The positioning provided full protection for the open terrace area.

Britannia Leisure Centre is a new multi-sport community complex in Hackney. A key driver for the client was that the building should have a compact footprint. This was achieved by stacking the facilities, creating a rooftop MUGA with tennis courts and 5-a-side football pitches.Lang+Fulton supplied the external steel mesh panels which crown the building and provide panoramic views of London. These were made from their Terra-34 grating which features an anti-climb aperture. The tall slender panels were designed to continue the architectural theme of the building’s columns and vertical elements and were finished in a graphite grey ppc to compliment the neutral palette of stone, concrete and glass.In addition a grating screen was supplied to secure the upper levels of the stairway providing natural daylight and through visibility to the entrance atrium and cafe area.The steel grating also conformed to the requirement for material durability and low maintenance which were key specification considerations.The Britannia Leisure Centre has received multiple awards including Overall Building of the Year (New London Architecture).

A moment of Introspection Before the Big RevealMorrow+Lorraine had a bold vision for the contemporary 123 Hub. The lobby was no different. Home to Google and ENI Trading, prestige and performance was imperative throughout the building.123 Hub has a modern and neutral design scheme, using stone, wood and natural fabrics, which the luxury Entrance Matting needed to complement and protect. It tirelessly maintains its classic look while enduring and cleaning the shoes of users of the 200,000 ft2 office space. INTRAsystems has worked with Morrow+Lorraine on a wide range of projects so the practice knew the design potential of our product range.With its clean lines, INTRAflex XT was the preferred choice for their chevron scheme. It offers flexible configurations for a wide range of designs, as well as quality performance and proven longevity.Fusing Form and Function for Architectural ImpactINTRAflex XT has a heavy-duty aluminium frame available in a standard silver finish, anodised bronze or black. Each option comes with a 10-year warranty so will stand the test of time. Made from 100% recycled aluminium and fully recyclable, it also represents a sustainable option, as verified by EPD.For added practicality, INTRAflex XT sections are removable to help maintenance and cleaning. There’s no need to wait for service visits or specialist tools. On-site teams can lift each section to remove any debris or excess moisture, minimising disruption.As one of our most specified products, you can find it used extensively in prestigious locations.Elite Performance, Smart Aesthetics, Luxury Entrance MattingMorrow+Lorraine opted for INTRAlux® Elite Grey 606 fibre inserts to add a subtle colour and textural change, while complementing the stone floor beyond and enhancing the overall neutral monochrome palette.The simple appearance belies the advanced features. The INTRAlux® Elite fibre has a mix of coarse and smooth fibres made from 100% Econyl regenerated nylon, offering excellent scraping and sound absorption. It has excellent UV-resistance, fire resistance, and slip rating.Precise and practical installationFrom the chevron design Morrow+Lorraine supplied, we created an intricate plan for the install team; clearly labelled each component and supplied in oversized lengths to allow for tolerances and anomalies on site.We also provided spares just in case, as the install team had to work around some immovable features.The flush, glass revolving doors would have been particularly tricky for a lesser product. With our detailed plans, an innovative product and skilled installers, the effect is unassuming perfection. Explore Tiling and Flooring did an incredible job.

An architectural marvel located in an area of the capital rich with history.In the centre of one of the most famous cities in the world and a stone’s throw away from the prestigious St Paul’s Cathedral – the commercial entrance matting at Newgate Street had to be as eye-catching as the location it sits in. We were specified early on for this project – working closely with SDS Matting who are familiar with our market-leading capabilities. For this design, incorporating the alternating narrow stone strips was a priority feature for the client – a challenge, but end results like this are always worth the effort.Two products, one Elite solutionThis creative execution called for a combination of two innovative products. For the revolving doors (where foot traffic is always heavily concentrated) INTRAflex XT with Elite fibre inserts was specified to deal with most of the dirt and moisture. As one of our most popular products, INTRAflex XT offers optimum durability, performance and aesthetics. For the strip style beyond the revolving doors, INTRAflex SP achieves the striking finished effect you can see in the photographs.The strips of INTRAflex SP are inset into the terrazzo tiles following the direction of travel. As most Entrance Matting Systems are set perpendicular to the direction of travel, this particular design was a great opportunity for SDS Matting to demonstrate their expertise. Laying the matting perfectly to line up with the entrance matting surrounding the revolving doors was one of the big success stories of this project.The INTRAlux Elite black fibre inserts used at Newgate Street contain a monofilament scraper element to remove dirt effectively and, in the classic black colourway, play into the colour scheme perfectly to complement the architect’s overall foyer design intent.Moving in a new directionQuality was a high priority for this project. As Entrance Matting specialists with a proven eye for design, we were specified early on by Buckley Gray Yeoman having worked closely with them before. The added element of laying the matting in the direction of travel called for a matting product that could be installed with ease. Of course, INTRA systems is the name that will always come to mind.The end result is Entrance Matting that truly adds to the visual identity of the building. From floor to ceiling, the foyer is a unique space. Our specification consultants always enjoy the opportunity to get creative with clients – and this project was another example of how INTRA helps architects turn something pedestrian into a signature focal point.If you’d like your project to look this good from the ground up, get in touch with us today to find out more about our range of products. Or simply view our complete range on our website here.

This surreal manor house has been converted with the help of five bespoke Ridgeglaze rooflights from Glazing Vision, to provide a constant flow of natural daylight throughout this new renovation.This secluded manor house in Mawgan Porth near Newquay involved a combination of new-build and refurbishment to help create a special property with interlinked courtyards. Gardens and entertaining spaces that reconnected this house with its rural location.A property which had lost much of its character due to previous poor-quality extensions and renovations was in desperate need of an overhaul and some true care and attention to help provide the clients with a home they could cherish.CSA Architects were entrusted with this mammoth task and working closely with builders P Chapman Construction they have been able to capture the true identity of the property and its marvellous countryside surroundings.From the point of arrival, the driveway leads guests to a grand entrance hall, that seamlessly links the original house and the new buildings, whilst also connecting directly to the surrounding landscaped gardens.Renovating the original house to provide guest accommodation that is both cosy and functional, the extensions have created large open plan living and dining spaces, a sitting room, games room, and functional boot room.The use of 5 multi-part Ridgeglaze rooflights from Glazing Vision add an abundance of natural daylight throughout this new renovation.Providing the perfect addition to the apex roof line, allowing glazing on both returns, and in keeping with the juxtaposition of rustic and contemporary which is almost flaunted throughout the home.Given the history of the building, double glazed rooflights were used with a low e coating for maximum thermal performance. The low e coating on the glass allows most of the visible light to pass through as well as the short-wave heat energy but blocks long wave energy from passing through. This ensures the heat from inside the building is reflected, back into the room, and so heat losses are significantly reduced.Throughout the property, unique characters have been retained but with carefully selected improvements to emphasise the potential within the property. The rustic stone floor and extensive areas of Crittall-style glazing sit against the original stone wall of the house and form part of a rich palette of high-quality materials. The use of reclaimed wood cladding, brick walls and oak beams are brought together around an exposed steel structure that define the main living spaces.

CHALLENGEWestfield, the world’s largest listed retail property company, is set to change the face of retail in the United Kingdom with the opening of its new flagship development – “Westfield London” – at White City, London.Beneath a spectacular, undulating glass roof, the £1.6 billion Westfield London destination combines over 150,000m2 of retail, restaurants, cafes, bars and leisure facilities to create the ultimate shopping and leisure destination.Westfield London will act as a catalyst for the redevelopment and regeneration of the wider White City area with a further £1billion investment expected in the immediate vicinity over the next 10 years.SOLUTIONKnauf Insulation supplied Rocksilk® RainScreen Slab as part of the rainscreen cladding system to the external stone clad façades of the development and internal stone clad stairwell and elevator areas. The specification of Rocksilk® RainScreen Slab provided both performance and installation benefits to both client and specialist installing contractor.Rock Mineral Wool has a Euroclass A1 reaction to fire classification to BS EN ISO 13501- 1, the highest classification available. With rainscreen cladding incorporated into building design fire performance is particularly important and, as such, a non-combustible component such as Rock Mineral Wool provides the ideal prevention against the spread of fire. The non-combustible nature of rock mineral wool ensures that it will not burn, will not give off toxic smoke and will not suddenly ignite in a fire due to ‘flashover’.Another key specification element related to the speed and ease of installation. The required thermal performance of the building was dependent on the correct installation of the specified insulation product. Rocksilk® RainScreen Slabs are easy to install down to their superior workability ensuring installation stayed within the tight time constraints. Rocksilk® RainScreen Slab is treated with a water repellent additive to ensure the building structure is protected against rain penetration and it can also be installed with either face adjacent to the sub structure.Rocksilk® RainScreen Slab provides an additional benefit for the installing contractor as it is designed to adapt to minor imperfections in the building’s substructure. The rock mineral wool product ‘knits’ together, ensuring intimate contact between slabs ensuring all joints are closed and thermal efficiency is maximised.Rocksilk® RainScreen Slab has excellent acoustic properties, which contributed towards the acoustic performance of the structure in order to comply with both sound insulation and sound absorption requirements.What’s more, individual packs of Rocksilk® RainScreen Slabs are compression packed together in Knauf Insulation’s innovative packaging method, Supakube. The advanced compression technology and strong packaging materials ensure the product is easy to transport and store, reducing environmental impact and causing minimal disruption on site and the surrounding area.

Capturing all the glamour and splendour of the roaring twentiesthis latest scheme takes to the spotlight. For the restoration of this magnificent building, St. George and TP Bennett turned to a rainscreen which would not only project the right image, yet stand up to the most demanding requirements.For a building with such status and heritage, bothSt. George and TP Bennett opted for a rainscreen solution which would not only project exactly the right image, yet stand up to the most demanding requirements. As a mixed-use development, comprising 209 new homes overlooking a central square, lined with bars and restaurants, and an impressive double-height entrance foyer to the eight-screen Picturehouse Cinema, 'the biggest outside London’s West End,' it was vital that the chosen rainscreen could withstand numerous vying challenges. Thanks to a comprehensive list of intrinsic qualities; including extreme weather resistance, durability, longevity, impact and graffiti resistance, as well as BBA, CWCT and NHBC 2021 certification, Petrarch ticked all the right boxes and exudes pure elegance with its smooth Alabaster finish.Petrarch enrobed Filmworks wins Best Refurbishment project at this year’s Facade AwardsWe’re extremely proud to share that The Filmworks has won the Best Refurbishment project at this year’s Facade Awards. This is the first year that Architectural Panel Solutions has personally entered the awards and we’re thrilled to have debuted as award-winners. We cannot, of course, take all the credit for this project; it is the result of a highly successful collaboration with Richardson Roofing, and talented architect tp bennett for our client Berkeley Group, St George.The Ealing Filmworks by Berkeley Group, St. GeorgeFor a building with such status and heritage, both Berkeley Group, St. George and tp bennett turned to a rainscreen and framing solution which would not only project exactly the right image and retain the splendour of a bygone age, yet also stand up to the most demanding requirements. Blending elegant aesthetics and exacting technical standards; our Petrarch engineered stone rainscreen facade offered the perfect balance.As a £100m mixed-use regeneration scheme comprising: 209 new homes, a central square, lined with bars, restaurants, and featuring a double-height eight-screen Picture-house Cinema (the biggest outside London’s West End) the demands and rigour demanded of the chosen building materials were to be immense.About The Filmworks, in the words of the architect tp bennettGiven the delicate restoration and the fact that this was a conservation area, it was important that the chosen facade retained an elegant and natural aesthetic.’A careful infill within an existing urban block, the scheme has been designed by tp bennett as a contextual response to the surrounding buildings in the conservation areas. Each perimeter facade is designed in a subtly different language, depending on the character of the particular street it is facing. The architectural language changes towards the interior, where the contextual red brick and stone have been complemented with a more contemporary materials palette, including dark blue brick with contrasting green-glazed brick inserts and bronze-coloured cladding laser cut with a distinctive, three-dimensional geometric pattern.‘tp bennett are dedicated to ’creative reuse‘ as a practice – ’our ethos is to re-animate and adapt redundant historic buildings to reinforce a unique sense of place within each project. With our in-house skills and experience to draw from – as well as access to a strong network of conservation specialists – the practice is in a prime position to animate the past and inform the future.‘Here’s what our esteemed installer, Richardson Roofing had to say about Petrarch panels and our level of customer service:‘APS were very easy to deal with during the purchase and logistics process, of getting the Petrarch engineered stone to site. They are very responsive to queries, helpful and went out of their way to assist in any way they could. The team really do know their products well and were very helpful. Despite this being a somewhat difficult site with delivery booking requirements, APS worked with us to optimise logistics for just-in-time deliveries.’Krissy Dawson (Contracts Coordinator)

Historic music hall renovationLindab Rainline has been used by Forrest Construction on this new-build residential development project, Queens Court, which comprises of 17 one and two bedroom apartments, each with access to open space.The scheme sits on the original site of the historic Queens Hall where musicians including The Beatles and Stone Roses once played. The hall closed its doors to the public in 2004 and was demolished by the council in 2012 following a fire at the site.Architect, Denovo Design; appointed to the project by Halton Housing Trust; specified galvanised steel rainwater drainage for its durable and recyclable characteristics and to coordinate with safety railings on the upper terraces.Neil Ashworth, head of new build at Forrest said: “The development has seen us regenerate the entire Queens Hall site with new affordable homes built to a high specification of sustainability and energy saving standards”.The project received high critical acclaim, going on to win the Building Excellence Award for Best Small New Housing Development, and the Green Apple Awards Bronze Award for the Built Environment and Architectural Heritage. 

Perched on an elevated plane above the tranquil Suffolk village of Rattlesden, Rising Sun Hill is a bespoke residential housing development that seeks to blend in with its surroundings while standing out among other new builds for its character.The 22 homes include eight that will be offered as affordable housing. Individually conceptualised, the homes feature finishes that draw on traditional materials and designs, such as weatherboarding and rendering. To reflect the space of the surrounding countryside, the homes (which range from 2-4 bedrooms) are roomy, both inside and out. Large, landscaped gardens, stone paths, patios and generous planting of shrubs and trees complete the idyllic setting.But attention to detail hasn’t just been dedicated to aesthetics. Consideration has also been given to the homes’ long-term sustainability, with each home being fitted with an air source heat pump and well-designed insulation.The very fabric of the buildings, from the blockwork to the timber frame, has been scrutinised too. For developer Hartog Hutton, it was just as important to use high-quality materials as it was to give each building its own individual flair.

Project DetailProject: Motel One – ManchesterLocation: Manchester Piccadilly, UKProduct: TS.9000 range of architectural closers for main reception and TS.3000 range of contract closers for apartmentsProject Description“Manchester has got everything except a beach,” said Ian Brown, lead singer of The Stone Roses. The city in the northwest of England is known as a party and music capital. Bands such as Oasis, The Smiths or The Chemical Brothers have their roots here. However, if you want to experience all the different aspects of this diverse city it would be best if you booked a longer stay at your cheap and centrally located Motel One Design Hotel in Manchester.Brand new and built in a very tight but friendly spot the Motel came as no surprise requiring a couple of door closers for its Hotel and resting overnight stay accommodation. The TS 9205 were chosen for heavily used entrance area and the TS 3204 were chosen for their bedroom doors because:They are supported by an established companyHave excellent right up and guaranteesVery easy and fast to fit and adjust making them the perfect answer for the contractor and door manufacturer.

SubFloor raised steel flooring was used to renovate, raise and level a 285 m² listed museum floor into a modern meeting space in Ellesmere Port, Liverpool.This simple and elegant solution raised an uneven stone floor up to 300 mm to allow for installations and insulation. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height. Steel joists were used to meet moisture requirements in the port area and underfloor heating plates were assembled on top.Products:Steel Joist 45x30x3800 mmSubFloor Screw 300 mmScrew FootInsulation Bearer 120 mmInsulation Bearer 95 mmHeight Variation: 50 - 303 mmSystem Weight - c/c 400 mm: 2.88 kg/m²Materials:Steel SUB250 GD, Z100 GalvFibre-reinforced VitamidePolyamidePoint Load 50 x 50 mm: 5.78 kN6.78 kN/m² - Between screws10.54 kN/m² - Over screw at joist edge[According to SS-EN 1195:1998] 

In the picturesque Wachau Valley, among numerous vintage taverns and art galleries, lies the city of Krems an der Donau, an ancient town on the Danube that enjoys an exclusive natural landscape surrounded by greenery.A short walk from the city centre, nestled among the surrounding vineyards, the Steigenberger Hotel and Spa offers guests a warm welcome with a modern style where they can breathe in a calm ambiance with relaxing views of the old town of Krems or the Danube Valley. In this setting suspended somewhere between tradition and the search for contemporary style, the elegance and practicality of Atlas Concorde products stand out in some indoor areas of the building. Realism, simplicity, and technical performance: the strength of a natural material inspired by stone covers the walls of the rooms in a warm shade, creating a strong yet natural and welcoming atmosphere. Veins, shading, and inclusions of materials offer a contemporary design, creating a synergy between reliability and beauty. On the other hand, the interpretation of the concrete effect in a ceramic material creates the perfect background to experience moments of relaxation in the suites and the spa. Original decorations and elegant porcelain surfaces embellish these spaces, the floors and tiles interacting in perfect chromatic harmony.

Designed by architects from Qatar, this complex villa has a very different design from the usual house models; Clean and angular forms which are broken up with massive section of timber structures. These structures are not ordinarily large section of timber. They are created in house at Technowood and serve as a “reduced timber option”. Furthermore, with only using 2% when compared to using sold timber for the same project.Stone, metals and glass are the main texture of the design. These white tones of concrete structured against panels of natural timber, it’s most eye-catching feature. Located in Dohada, one of the most modern cities of Qatar, this futuristic house is also accompanied by the tranquil nature of the pool and the wooden sunbathing areas surrounding the secluded exterior.When working with designs for projects, Technowood allows the Architect to think big and realise big at the same time. Unsupported beams of this natural material can span up to 12 metres unsupported… imagine this section in a hard wood, the weight would be tonnes in comparison to the lightweight Technowood option.Credits and Further informationLocationDohada, QatarMaterialsCantilevered Bris Soleil, solid forms and cladding in TechnowoodProjectPrivate Villa

Material and system specification used: Kalzip FC rainscreen in 500mm wide RAL 1035 pearl Beige and RAL 7022 – also Kalzip wall perforated        Stephenson Quarter is a major mixed-use development in the heart of Newcastle upon Tyne by the Clouston Group. The site was home to the Robert Stephenson and Co. Locomotive Works, the crucible of the railway industry, where the revolutionary Rocket was built in 1829. The site includes the new Crowne Plaza Hotel and The Rocket (offices) plus Stephenson qtr Car park   Installation of over 1500 m2 of FC rainscreen cladding to the Rocket building in RAL 7022 and RAL 1035 Pearl Beige in between stone cladding on the Crown Plaza Hotel Kalzip Perforated facade was used to create a feature between the main brick work for the car park Key challenges overcome:  With 3 phases of the project to undertake over a period of 18 months. Working at height in a very tight, exposed city centre location, needed a high quality over-cladding solution with neat joints that was quick and easy to install. The product needed to integrate with the window system and other cladding facade materials   

Fifty5ive Queen Street, Salford is a new 18 storey, 220-unit residential building in the centre of Salford for local developer Salboy.It includes modern, high-quality 1-, 2- & 3-bedroom apartments and duplexes, amenities include private resident workspace, gymnasium, yoga studios, resident cinema room and a terrace garden. Domis Construction is the preferred construction partner for Salboy on this scheme. In early 2022 they approached Encon Insulation in Chorley looking for a more readily available alternative to the stone wool product already specified. URSA UK Ltd was chosen to fill the void and keep the scheme on track. We supplied over 4500m2 of 100mm URSAPAN BLACK - a unique glass mineral wool rainscreen cladding insulation slab; ·      Euroclass A1 fire rating (non-combustible).·      Thermal conductivity of 0.035 W/mK.·      BBA Certified. Kate Fox, Area Sales Manager for the Midlands stated, ‘Following the success of this initial partnership URSA are now the preferred supplier of rainscreen insulation and our products are currently being used on Anchorage Quay in Salford with others in the pipeline including Derwent Street in Salford’.     

The Old Grammar School House in Shrewsbury is a Grade II listed historic building, which was formerly part of the school and has been converted to an office space.KEIM were approached by Randle Building Solutions, who had used KEIM Mineral Paints on a previous project in Edgmond, Shropshire. The conventional painted stonework was flaking and blistering due to excess moisture trapped within the substrate. The painted brickwork on the front of the building was in good condition.Bryan Roe of KEIM Mineral Paints recommended stripping the paint off the stonework and the brickwork at the back of the building, using KEIM STS 7M, that was holding damp and flaking. The gloss paint on the stone windows surrounds were to be stripped as much as possible and sanded down to create a key for the mineral paint to bond to.KEIM Contact-Plus was diluted with KEM Soldalit Fixativ to equalise surface textures and fill hairline cracks. KEIM Soldalit, in a bespoke grey colour (KS01 0312) that was matched back to the original paint colour, was applied to create a breathable, long-lasting finish.KEIM Soldalit is fire resistant and A2-s1, d0 classified. The sol-silicate properties mean that it can be applied over unpainted and previously painted surfaces without the need of a primer.

Breathing new life into a 16th century farmhouse in Redmarley, Gloucester, Durbridge House has undergone extensive renovation works. Bryan Roe of KEIM Mineral Paints, visited the property and found evidence of algae, and flaking paint. In order to provide a solid foundation on which to paint, a skim coat of KEIM Universal Render for the base of the exterior stonework was recommended, to consolidate the fried stone and create a bell shape for improved water shedding.The damp chimney stack on the north elevation was stripped back, using the DOFF system (a high temperature, low pressure method, which is least invasive for the brick facia), to release trapped water and left to dry for two weeks prior to re-decoration. Bryan recommended removing all loose material by wire brush, as well as stripping the chimney stack and base of the stonewall to the north elevation, as much as possible.To remove the red algae, 50:50 of bleach and water was advocated, in addition to KEIM Algicid for mould and algae growth. The KEIM Royalan system was recommended, due to its durability and breathability. It was applied to the newly skimmer render and will provide a long-lasting coating, as its highly resistant to fungal and algae growth, while also being resistant to airborne pollutants and acid rain. 

Opened in April 2019 by the Mayor of London, Sadiq Khan, Hounslow House is the new greener-energy HQ of Hounslow Council in London.Building plans for the new purpose-built council offices included a rooftop communal area, and, impressed by what the team at AG could offer, it was agreed that AG’s TerraPave® premium granite flags perfectly fitted the requirement for a smooth granite finish flagstone, providing a more superior product than the original spec while also ensuring significant cost savings on the project.The 500m² area was given a beautiful aesthetic look through the use of our TerraPave® Rimini and Milano Ground (400x400x50mm) which was calibrated and laid on pedestals for speed of construction.Offering an attractive, cost-effective and practical alternative to traditional stone paving, TerraPave® is a favourite choice with architects and specifiers – and this is one project that proves why that’s the case.Dan Smith, AG Regional Sales Manager, said:“AG was able to provide better quality and a keener price on the products used. Furthermore, our team was also able to deliver both the experience and project know-how required to ensure the client received best value for money on the overall project.”

AG were tasked with installing paving flags at the new entrance of the Portlaoise Retail Park as well as lifting and replacing the old paving at the existing entrance.The TerraPave® flag, manufactured from aggregates sourced from around Europe, was chosen as a fine quality concrete alternative to natural stone, which helps keep costs down. It was also selected for conforming to current BREEAM sustainability criteria which AG include as standard requirement. TerraPave® also requires little to no maintenance and is completed in ground and textured finishes, giving it a more attractive look compared to other paving solutions.John Donnellan, Key Account Manager AG, said:“We felt the TerraPave® flags were the best products for these highly pedestrianised entrances due to its glowing track record and the similar projects it’s been used for. TerraPave® is easily maintained and retains its colour very well and these were the qualities Harcourt Developments required due to the heavy footfall at the Retail Park. After 6 years the flags now look in pristine condition.”The old paving was replaced with our TerraPave® Genoa Ground flag for its unique design and eye-catching finish.

Emrys Architects were appointed by Berners & Wells to design this mixed-use development located north of Oxford Street in central London. The building sits across 2 different streets, the lower two floors accommodate flexible retail and restaurant space and the upper floors high end office space.The building has been designed to respond to the historic Character of the local area, some areas were partially demolished while the Edwardian facade on Wells Street was retained, repaired and extended. Portland stone and teal glazed-brick detail was used to create seven two-storey high arches showcasing the grand entrances to the offices and retail units.The ironmongery brief centred around replicating the arches present in both the external entrances and the courtyard, this distinctive shape was also used in the vision panels on a number of internal doors. To fulfil this brief, we worked closely with the architect to design and manufacture bespoke arched push plates in Flat Matt Black(FMB). Where required these were paired with complimentary D-shaped pull handles and simple accessories finished to match. All other ironmongery was finished in FMB including hinges, door closers, signage and accessories.Photography: Neil Kenyon

Expanding Exeter College's 700-year-old campus in the heart of Oxford was a privilege given to Alison Brooks Architects: developing Cohen Quad, a hub for students including living accommodation for 90, an auditorium, seminar rooms, social learning spaces, an archive, a café, roof terraces, offices, and fellows' accommodation.Student rooms and fellows' studies are enclosed by patterned stainless steel that folds across wall and roof surfaces, sitting on a stone-clad 'base' that houses the quads' public spaces.The Rimex tiling in the checkerboard pattern really highlights the stunning dormer windows and the beautiful curve of the tiles from the roofline wrap around the roof and down the walls creating a seamless cloak around the building. 17,000 iridescent stainless steel shingles adorn this roof, and the tiles are of a wonderful muted bronze and champagne colour with an unusual texture - catching - but not reflecting the sunlight. "We were given excellent technical and sales support from Fixfast. All stainless steel fixings and shingle clips were supplied in a timely and efficient manner. These factors contributed to Roles Broderick Roofing Ltd winning the NFRC Roofing Award for 2017"Ben Clark - Operations Director at Roles Broderick Roofing Ltd

As the UK’s leading organisation for advanced materials research and innovation, the Henry Royce Institute plays a pivotal role in the country’s ambitions to develop groundbreaking materials and technologies, while fostering in parallel sustainable growth and development. Its purpose is to provide industry large and small as well as academia with the capability to develop, make, test and characterise innovative products, components and systems. To this effect, it provides easy access to state-of-the-art equipment worth more than £150m (175m euros) and to a highly trained support team. The Henry Royce Institute, known to many simply as ‘Royce’, operates from its brand new building at the University of Manchester and works in close coordination with eight additional, leading institutions across the UK – the Universities of Cambridge, Leeds, Liverpool, Oxford and Sheffield, the Imperial College London, the National Nuclear Laboratory and UKAEA (UK Atomic Energy Authority) – as well as Associate Partner, the University of Cranfield. All in all, Royce coordinates over £300m (350m Euros) of facilities, making it one of the global leaders in material science: it was at the University of Manchester, just a stone’s throw away from the new Hub, that graphene – a game-changing, carbon based supermaterial 200 times stronger than steel – was discovered for the first time.

The team at Moorlands Lodge Care Home, situated in the Surrey South Downs are there to welcome you for a guided tour around the home and discuss your specific care needs.Moorlands Lodge Care Home sits in a beautiful rural location, surrounded by local places of interest including National Trust properties, gardens, and art galleries, and with excellent transport links to nearby Guildford and London. Only a stone’s throw from the bustling market towns of Haslemere and Farnham, Moorlands Lodge Care Home offers a warm and welcoming environment and the very best in residential care, nursing care and dementia care. With 97 rooms, residents can choose between one-bedroom, two-bedroom, and studio apartments, all with en-suite shower rooms and some with kitchenettes.The Una was used in this building. The Una is a timber leaf riser door system with a concealed metal frame. Provided as a full metal door set, made to size and delivered to site as a flat-packed kit prepared for all ironmongery. The wood door leaf comes with hinge cut-outs and can be primed for on-site finishing or pre-finished in our factory. Choose from non-fire rated or fire rated to E30 or E60.

The historic Bell Street Stables in Glasgow has recently undergone an extensive conversion, featuring the installation of Alumasc’s Flushjoint aluminium rainwater downpipe system.This magnificent period property has an interesting history. It was built between 1896-98 by A. W. Wheatley, originally to house horses working to pull the Glasgow City Council Cleansing Department’s refuse collection carts. In 1955, the building was redesigned to provide a separate entrance for the Police Department who shared the property with Cleansing until the 1980s. Situated in a prime position within the Merchant City area in the city centre of Glasgow, the building was converted to form 52 mid-market affordable rented flats by the Construction and Manufacturing Group (CCG) on behalf of Glasgow Housing Association (GHA) and Lowther Homes, during a two-year construction programme. The renovation was completed in 2019.A major requirement of the renovation was to conserve as much of the building’s heritage as possible, which included all exterior aspects. This involved the upgrade of the stone elevation, replacing all windows and making repairs to the roof and rainwater system.Flushjoint aluminium downpipes along with contemporary hopper heads were specified for their contemporary design. The installation was completed in a non-standard RAL colour to match and complement the window surrounds. 

Designed by AHR Architects, the new UK Hydrographic Office in Taunton has won numerous awards including the BCO National Awards Corporate Workplace Award and Best of the Best Award 2020 and a Regional RIBA Award, RIBA Sustainability Award and RIBA Client of the year 2019.The United Kingdom Hydrographic Office is the UK’s agency for providing hydrographic and marine geospatial data to mariners and maritime organisations across the world. The UKHO is a trading fund of the Ministry of Defence and is located in Taunton, Somerset with a workforce of approximately 900 staff.We worked with the Architects, Client and Contractors to select one of our exclusive GeoBrick range for this prestigious project. The clean sleek lines and hardwearing stone finish provide a stunning façade to this landmark building. The warm texture of the brick also gives depth and character and softens the mass of the building.“The design principles of the building called for a linear brick which was modern and unique whilst complimenting the landscape and a variety of existing brick buildings surrounding the new HQ. The EH Smith Geobrick brindle bricks stood out from all the rest and we are delighted with the results. Personally, this is my favourite material used on this project!”- Johanna Funnell New Build Project Manager - UKHO

Penrhyn Heather Blue slates from Welsh Slate feature on Lincoln’s Inn’s Great Hall. One of London’s most unique buildings is enjoying a new lease of life, thanks to Welsh Slate. The Great Hall and Library Buildings of The Honourable Society of Lincoln’s Inn, an association of students, barristers and judges and one of the four Inns of Court, have over the past two years undergone an extensive programme of external conservation carried out by expert stone masons Capital Stone.  The programme of work includes replacement of the Great Hall’s slate roof covering. Work is still ongoing, with anticipated overall completion in April/May this year, but the work to the Great Hall roof is complete, as is the striking of the temporary roof covering which brings the new roof into view.  The Great Hall and Library Buildings were constructed from 1843 to 1845. The Great Hall roof was originally covered with lead but was recovered in 1868 with slate. From 1871 to 1873 the Library was extended eastwards by three bays. The building is an important example of 19th Century Gothic Revival architecture and has been listed Grade II* since 1951.  After 154 years, the slates on the roof of the Great Hall required replacing to protect the interior, including a striking fresco and beautifully worked oak. The slates were suffering from surface delamination and a large proportion had slipped due to nail rot, requiring tingles to hold them in place. The existing slates were found to originate from both the Ordovician and Cambrian deposits of North Wales – the former predominately on the eastern elevation and the latter on the western. The large Ordovician slates, typically 850mm long and between 350mm and 500mm wide (and laid to a fixed gauge of approximately 350mm which equates to a head lap of approximately 100mm), originated from what is now Welsh Slate’s Ffestiniog quarry, which is currently mothballed, while the other quarries producing these no longer operate. The Cambrian slates from the Llanberis region, as well as Bethesda where Welsh Slate’s main quarry is based, were even larger, at 850mm long and wider than 450mm, laid to the same gauge. Both slate types were fixed to timber battens on open timber rafters, with the underside torched with horsehair and lime plaster. These were replaced for the closest Welsh slate match – Welsh Slate’s County-grade Penrhyn Heather Blues, at 800mm long, widths of between 400mm and 550mm, and a 350mm gauge and 100mm head lap. These are guaranteed for 100 years, with a useful life of 150 years. While the roof is generally simple in form, with two large slopes, its substantial size at circa 800m2 meant the work took considerable time to complete. To allow for more than a dozen dormers the Welsh Slate had to be cut and fitted to size with double copper clout nails. The thickest slates were used on the eaves, diminishing towards the ridge to maintain the original visual finish. They were also holed from the rear to provide a slight countersink to the face. The Great Hall operates by day as a dining hall for members of the Inn, and by night, as a venue for dinners, receptions and weddings for up to 400 people. Set in 11 acres of beautiful grounds in Holborn, Central London, it is the closest Inn to the Royal Courts of Justice. Henry Skinner, Head of Projects and Facilities Management at The Honourable Society of Lincoln’s Inn, said: “The replacement of the roof covering was far from straightforward, despite its externally simplistic construction. During stripping of the existing roof covering, we had to deal with atmospheric lead contamination of a horsehair felt that sat between the original slates and close boarding, requiring controlled measures of removal and disposal.  “Furthermore, the close boarding had warped over time, causing an undulation between roof trusses that needed to be spaced out. This was achieved through the introduction of additional battens and packing timbers to create a level surface onto which the new slate could be laid.” Casey Wickers, trainee quantity surveyor with Capital Stone Renovation, said: “The main work of stripping the existing roof was extremely challenging and labour intensive, to not only remove, wash and handle each slate manually through a tight scaffolding design, but also doing so whilst wearing full RPE due to the lead contamination. “With the two stunning roof facades in full view, the quality of the Welsh slates can be seen by all.

Halamar acquired this site in Beaconsfield. Planning permission was granted for a new build two-storey detached dwelling, replacing the existing residential property constructed in the 1900s.A comprehensive set of architecture plans specified high quality elevations with a ‘classical’ Georgian-esque design. The sub-contractors, B-Bespoke Design & Build Ltd, required Keystone’s brick slip flat gauge headers above multi-pane sash windows and an intelligent bespoke interconnecting brick slip splayed bay system across two floors on the side elevation.ChallengeThe design and scale of the building, along with the arrangement of fenestration and opening detailing, required the careful skill and use of sympathetic materials to ensure the development enhanced the special character of properties in close vicinity.B-Bespoke Design & Build Ltd considered the volume of decorative window openings and availability of local skilled bricklayers when considering the most effective and efficient approach to the build schedule.SolutionAn offsite construction method was deployed by the sub-contractor. Keystone’s technical team were contacted to design brick slip flat gauge headers accommodating brick spans between 1135mm to 1472mm. Each with a 70-degree end skew, 375mm high face brick and 102mm soffit return whilst also incorporating keystone stone headers above specific windows. The prefabricated lintels improved the allocation of time and resources elsewhere on site allowing the build to be completed to a high interior specification still with an exterior full of character.The rigid symmetrical design and gracious classic proportions create a generous sense of space and natural light, with stunning traditional period features created above each window opening. The interconnecting brick slip splayed bay system spans 1695mm and provides a stark contrast to the boxy room profiles often seen with a Georgian home. This architectural feature accommodates the high ceilings and desired aesthetics whilst providing effective structural support to withstand roof and masonry loads above.A consignment of bricks was collected from site and each brick cut and bonded using a BBA approved construction adhesive to the load bearing lintels offsite. The patented perforated lintel design allows the adhesive to squeeze through the perforations and form a ‘mushroom’ on the inside, providing a mechanical lock between the steel lintel and the brick slips.Testimonial“For the new build Georgian styled home, we sourced over thirty bespoke prefabricated brick slip feature lintels from Keystone as well as a unique interconnecting feature brick splayed bay system. As a smaller building contractor, we saved time and money using Keystone Lintels. We did not need to source additional skilled labour on site to create and replicate the intricate brick detailing which included Keystone stone headers. Ultimately this resulted in a faster build schedule for the client.”Nirmal DhaliwalSite Manager at B-Bespoke Design & Build Ltd