"steel reinforcement for concrete"

Catnic's lintels have given definition to Beaumont, a stunning Country and Coast Homes development of 6 large houses in Highcroft, Exeter. Approximately 60 1.25inch CX cavity lintels were supplied, which support the sharp, unusual shape of the architect-designed buildings, were chosen for their strength, reliability and thermal capabilities.The lintels support the exterior window and door features; special corner lintels support the external over-eaves, while large window openings elegantly contour the shape of each house. Chosen specifically to support the specialist architectural features of the development, offering both the structural and thermal performance required for the building envelopes.Constructed using the traditional brick and block method, the building facades were then finished with a white K-render to all external elevations.Consistent with Country and Coast Homes' portfolio of luxury contemporary homes, the development features superior quality fixtures inside and out. As a brand synonymous with quality in the construction industry, Catnic reflects this too. County and Coast Homes focuses on exceptional attention to detail, it only uses the most reliable and durable products in the construction of its homes. Chris Dodge at County and Coast Homes said: "We have been using Catnic Lintels for over 10 years, they are by far the best. A superbly well organised company who offer exemplary service, their lintels are extremely capable and well suited to our high quality homes."Country and Coast Homes prides itself on a high level of sustainability in each development. Catnic lintels surpassed the energy targets in this particular development by helping deliver the efficiency required to achieve a B on the EPC rating.

The Wickes Farnbrough DIY store is one in the latest Wickes stores to have been developed by Travis Perkins as part of its ongoing plan to double its UK store network to 400 by 2020.The project used Trimapanel® micro-rib 90mm on the front elevations and Trisomet® 80mm for the rear wall elevations; Trisomet® 120mm was used for the roof; and parapet gutters lined with a Colorcoat Aquatite® PVC membrane. (HR50) site assembled built-up system, which is being used as a feature on a number of the Wickes Stores, ran across the top of the Trimapanel® on the front elevation acting as a separator between the two units. LP1000 liner panels were also used internally.

The Pond Hall Building at Sellafield is 36mtrs high and 192mtrs long and houses two large water ponds for the reprocessing of spent uranium rods, which is now reclad in Trisomet insulated panel system.

A conversion project in Somerset has utilised a number of products from Catnic to provide practical and sustainable living accommodation, suitable for retirement. Coates Farm has employed Catnic's® Urban standing seam roofing and cladding system as well as Catnic lintels to ensure the environmental impact of the building is kept to a minimum.Situated in Kittisford, a small picturesque village near Wellington, Coates Farm is owned by Maurice and Penny Stanbury. “We decided, that due to our advancing years, we wanted a practical and sustainable home that would require very little maintenance,” said Maurice. “Having received go-ahead to repurpose an old cow shed, we wanted to ensure that the materials specified would contribute to the building’s eco credentials.”To ensure the work was allowable under permitted development, it was essential that the development was kept within the same building footprint. Working alongside architect Nigel Pearce at Pearce Practice for the planning and design of the conversion, the decision was made to specify Catnic's® Urban standing seam roofing and cladding system.A cost-effective alternative to traditional copper and zinc standing seam roof systems, the Urban system is manufactured to meet all relevant legislation, including load bearing for wind speed in accordance with EN 1991-4 and weather tightness in accordance with BS 5534 Parts 1 and 2. Furthermore, helping to meet requirements for sustainable building solutions – Urban is BRE Green Guide Rated ‘A’ and at end of life – the panels are 100% recyclable.“Maurice came to us with an idea that he wanted something different for the roof that would improve the eco footprint of the building whilst being aesthetically pleasing on the eye,” said Nigel Pearce.“Because of the permitted development, we were restricted by the low roof pitch. As we couldn’t specify slate or tiles, we remembered that we had used Catnic® Urban on a recent conversion and found it to be a great option; not only could it accommodate the low pitch at Coates Farm, but it also matched the contemporary look and feel that Maurice was looking for,” added Nigel.Initially to be specified for only the flat section of the roof, it was decided that Catnic® Urban would be utilised for the complete roof due to its crisp lines and strong aesthetics.Maurice Stanbury said, “During the initial specification, we were really happy with the service received from Catnic. Having decided upon Catnic® Urban, we began exploring the possibility of getting our lintels from them too. Alongside standard lintels, we required a bespoke corner lintel to ensure we could match the intended design of the building. We submitted technical drawings to Catnic and the technical team made the process very easy.”Whilst Maurice project managed the redevelopment, the installation was undertaken by Kevin and Ashley Drew – local builders known to the Stanbury’s. After specification, but prior to ordering Urban, it was decided that Maurice and Ashley would attend an Urban training day at Catnic’s training centre in Caerphilly, to learn how to correctly install the standing seam roofing system.During the course, Ashley and Maurice spoke with Catnic’s Technical Director Richard Price, who then visited the site personally to measure up and give guidance to apply what they had learnt in Caerphilly into practice.Throughout the conversion, Kevin and Ashley Drew worked closely with Catnic to guarantee the successful delivery of the project. Using Catnic’s Lintel Advanced Scheduling System (CLASS) ensured that they could adopt a ‘just in time’ approach to deliveries.“Having ordered both lintels and Urban from Catnic we were able to delay the delivery of the system until we were ready to install it,” said Kevin Drew.“We found the system incredibly easy to work with – particularly as this was our first experience of Urban - managing to install it quickly between the two of us,” added Kevin.“We are thrilled with the end result, and we now have the property we had always dreamed of having,” concluded Maurice Stanbury. “Catnic made the process incredibly easy from start to finish, and with Catnic® Urban we are safe in the knowledge that the system will now require minimal maintenance.”

The India Buildings is located on Water Street in the centre of Liverpool’s financial and business district. It was designed by architects Arnold Thornely and Herbert J Rowse, following a competition to design an office block which was judged by the great Sir Giles Gilbert Scott and built between 1924 and 1932 for the Blue Funnel shipping line owned by Alfred Holt.The building’s design is influenced by the Italian Renaissance style and it has several features of the American Beaux-Arts style, including for example the sculptures of cherubs above the windows.Having sustained damage during World War II the building was restored to its original state after the war under the supervision of Rowse, the original architect.In 2017, the Grade II* Listed Building was purchased by Legal & General and it was announced that HMRC would base a regional centre there. Renovation works commenced with the focus on creating modern, comfortable office space while retaining the heritage features of the building.Clement Windows Group was selected to manufacture and install the new double glazed steel windows which match the original single glazed metal windows and improve thermal performance and energy use within the historic building. Almost 1,000 windows from the Clement MW40 range were specified, polyester powder painted in RAL 9016 (White).Alex Harrison of architects Falconer Chester Hall said: “We had the pleasure of working with Clement on the steel window replacements of the India Building refurbishment project. Their performance in every aspect of the work was outstanding, and we wholeheartedly endorse them for any future contracts of a similar nature. One specific area where Clement excelled during the early stages, was the support we received from them during our discussions with the city planners regarding the bespoke windows. Their contribution proved very useful in moving matters forward and the end result is exceptional.“

Project details Charles de Gaulle International Airport is the second largest airport in Europe after London Heathrow. It is located just outside Paris and handles over 50 million passengers every year. For this reason it can be difficult to find the time for maintenance and repairs. "The airports floors have to withstand constant heavy traffic from passengers, staff and maintenance workers. It was therefore important that their repair and paint products were quick to apply, cure and hard wearing." The work that needed to be carried out was at the entrance to Terminal 3 which is the main public transport hub for Charles de Gaulle. For this reason the work needed to be carried out and finished between the hours of 9.30pm and 6.30am. After this time heavy traffic would resume. Our solution The first job was to clean the concrete floor slabs with Watco Concroff to remove all surface contaminants including oil and fats. Watco Concroff contains no solvents or other chemicals that are dangerous for the environment and penetrates even the thickest deposits of grease. The floor was then primed with Tack Coat, an epoxy resin adhesive primer which guarantees excellent grip on the key surface. As Charles de Gaulle is subjected to such heavy constant traffic a standard mortar would not be sufficient to withstand this, for this reason they choose Watco Concrex® Carbon Fibre. As it is as strong as granite it could be smoothed to a thickness of only 3mm, making the surface both waterproof and slip resistant. The Concrex® was subsequently painted with Safety Coat. Safety Coat is roller applied and contains fine, traction enhancing particles embedded in an epoxy resin coating so this coating was ideal for providing a non slip surface for added security.

Heslington East Campus Student Residences: Sustainable and Efficient Expansion Alongside the preservation of listed buildings, the University of York is investing in a flagship £130m development for students that promotes wellbeing, community, and sustainability. The initial phase sees 16 brand new student accommodation blocks and 2 communal hub buildings providing flexible social spaces. Surrounded by stunning lake views and natural habitats, the buildings are part of a huge initiative to expand the student accommodation offering.GOALSArchitects Sheppard Robson alongside Graham Construction sought to futureproof accommodation by incorporating multi-use buildings, including catering outlets and social hubs. Key to the brief was using the latest in safety, energy efficiency, longevity, and warranty credentials. Graham Construction’s use of modular external sandwich panels, prefabricated steel bathroom pods, and pre-assembled services distribution racks used Modern Methods of Construction with off-site construction techniques.CHALLENGESThe major challenge was to specify a roofing system that could keep up with the pace of the build, given the typical building was constructed from start to finish in circa 14 weeks.The roof deck comprised of precast concrete slabs which facilitated the works programme for speed of construction and consistency in build quality.Alumasc’s challenge was to find not only a waterproofing solution that was able to keep up with such speed of construction but also to meet a truly sustainable life cycle equalling the lifetime of the building.A key consideration in the design was the roofing materials’ thermal properties. To meet the u-value target of 0.15, Alumasc’s XPS Plus insulation was specified, providing a single layer of 175mm, which reduced the height of the overall build-up when compared traditional XPS.SOLUTIONHydrotech 6125 Waterproofing System / Derbigum Hybrid Upstands For over half a century Hydrotech Monolithic Membrane has been successfully used by architects and specifiers, ensuring some of the world’s most prestigious buildings and structures are kept watertight. With no product failures in over 50 years and guaranteed waterproofing integrity for the lifetime of the structure, Hydrotech offers a total life cycle solution for the building.Hydrotech was specified on the main roof areas for this project as it easily meets individual requirements of the buildings. In addition, the system is designed to last the lifetime of the building or structure to which it is applied, giving long-term waterproofing integrity and no future replacement costs.Applied in a hot liquid state to the deck, and including a polyester reinforcement, the bond of Hydrotech MM6125 is 100% absolute. There is no risk of water tracking below the membrane and because it is monolithic, no possibility of lap failure.DERBIGUM WATERPROOFINGDerbigum sustainable roof system was selected for the upstand areas. This hybrid solution was developed to improve the thermal efficiency in all areas to mitigate against cold-bridging with minimal insulant thickness. Derbigum bituminous membranes are high-performance waterproofing systems offering extended warranties and the highest levels of project support. The upstand zones benefited from Derbigum Mineral which is a mineral surfaced composite reinforced membrane.ROOFTOP MANAGEMENT STRATEGYIn addition to the waterproofing solution the buildings benefit from the full Alumasc rooftop management service. This included the design and supply of safety systems, accessories, and over 20 AOV smoke hatches meeting all British and European standards.Specific safe zones were designed by Alumasc Roof-Pro and positioned around all roofs for safe access. Purpose made clips for installing lightning conductor tape without roof penetration were also provided. All rooftop accessories are part of the Alumasc Roofing specification and therefore can be found back-to-back within the Alumasc 35-year system warranty.PROJECT DATACompletion: Autumn 2022 BuildingType: Student Accommodation ProductApplication: Hydrotech & Derbigum waterproofing systems Certification: BBA Approved & European Technical Approval Architect: Sheppard RobsonMain Contractor: Graham ConstructionAlumasc Registered Roofing Contractor: Tandragee Roofing

Clement steel windows were chosen for the refurbishment of this double-fronted office building set within a busy part of the City of London near Smithfield Market. Surrounded by narrow cobbled streets it is situated on the boundary of the Smithfield Conservation Area.Blenheim House Construction (BHC) selected windows from the Clement EB24 range because they best suited the original look of the building and allowed for the maximum amount of light to flow throughout the property. Natural light was an important aim of this high specification refurbishment - central to the building is a mezzanine which creates a dramatic light-filled double height space.The windows are polyester powder coated in matt RAL 9005 (Jet Black) to match the frames as a finishing touch.Matthew Brown, Project Manager at BHC, commented:“We found Clement’s management team to be attentive, promptly addressing queries when raised and offering solutions and advice when called upon. This resulted in the windows being installed in a safe manner as per our agreed programme, and perhaps just as importantly, the client being pleased with the look of the end product.”Photography: CGS Photographers Ltd 

A 19th century Listed Building, St Paul’s Church, has a prominent position at the top of St John’s Hill in Battersea. Current owners, The James Laurence Group, worked alongside the London Borough of Wandsworth Planning Department to agree how best this historical building should be restored and provided with a new lease of life. Clement were chosen to supply all the steel windows and conservation rooflights. The bespoke demands of the project required Clement to use two steel window ranges. Both W20 and EB24 were fitted to create the beautiful shaped windows which include club heads.

Reigate & Banstead Borough Council is transforming Marketfield Way, Redhill, with a brand-new leisure, retail and residential development. The 0.59-hectare site will turn the western side of Marketfield Way into a vibrant destination for both property seekers and visitors to the local area. It is made up of the Council’s former Marketfield Way surface car park and a group of retail and commercial buildings fronting 18-44 High Street.Features of the scheme include:A new multi-screen cinema hosting 7 screens11 new units for restaurants and shops on the ground and first floors150 new one- and two-bedroom homes to be privately rented within buildings up to thirteen storeys in heightLandscaping and public space improvements including a ‘galleria’ pedestrian route through the site flanked by shops and restaurants.The waterproofing and gas proofing of the new mixed use scheme basement area and ground floor was a crucial element of phase 2 of the project. Reigate and Banstead Council therefore called upon contractor Vinci Construction to undertake the waterproofing works, utilising Sika’s solution provided through subcontractor Oliver Connell & Son Ltd

11 Ducie Street is home to 250 of BDP’s Manchester based staff. It comprises 2,500 square metres of open plan office space with a further 400 square metres of ancillary areas, including meeting rooms, exhibition space, café and reception area.This award-winning building was designed by BDP’s architects and engineers, with a strong emphasis on functional, aesthetic and environmental considerations. It has achieved an excellent BREEAM rating and is certified carbon neutral by the Carbon Neutral Company.

J&P was involved early in discussions with several members of the project team, and using its BEAMCON product, provided a coordinated and value-engineered range of solutions to the multiple fixing requirements on the project. These included brackets that could take vertical shear loads of 72 kN, horizontal shear of 270 kN, tension of 495 kN and a moment of 25 kNm. BEAMCON was used to fix the innovative ETFE cladding “cushions” which give The SSE Hydro its distinctive appearance.

Naylor Lintels have been supplied to another prestigious project. Network Rail awarded the Wakefield Westgate “Gateway” Station project to Buckingham Group Contracting Ltd. The overall scope of the project • The construction of a BREEAM 2011 Excellent rated Station Building including DfT Code of Practice compliant lifts providing step free access to Platform 1 & Platform 2 and an enclosed footbridge • The Station embraces a modern open plan foyer including a travel centre, retail outlets, coffee shops and First Class Lounge • Integrated transport interchange providing a functional forecourt with Taxi/car drop-off, short stay parking and bus replacement facilities

A new £13.5million sports and swimming complex in Blackburn town centre has been constructed to replace the ageing Waves Water Fun Centre. The joint project between Blackburn with Darwen Council and Blackburn College will provide for students and residents swimming pools but also a larger fitness suite, a dance/ aerobics studio, sauna and steam room and two sports halls. The scheme, partly-based on Darwen Leisure Centre, will reduce the running costs of the existing Waves complex and reduce the subsidy.

ASF were asked to manufacture tree grilles in the design of the ASF 3000 in stainless steel, but with structural design and calculation attached that met an 8 ton point loading, so that the grilles would be suitable for drive over by 15t+ street cleaners. ASF worked with site and our own structural engineers to produce grilles that met and exceeded the required standards.The top 'face' of the grille bars were also castellated to increase grip on the surface of the grilles.The grilles also hosted large uplighters that also allowed for an 8t point loadingThe grilles were manufactured in grade 316 stainless steel to these standards and finished passivate dipped, offering a stable finished patina that will last for many yearsThe grilles were manufactured to these standards

Waitrose’s Distribution Centre at Bracknell delivers to more than 60 stores, handling up to 150,000 cases of chilled products. The new warehouse was conceived to a ‘green’ design; generating 20% of renewable energy on site with waste heat and office cooling recycled from the refrigeration process, efficient lighting and low carbon emissions. In keeping with the concept of sourcing natural materials, a Roma-3 mild steel grating fence in a galvanized finish was specified for the boundary demarcation.

A fascinating contrast between authentic stone constructions and modern stainless steel. This apartment development is located in the middle of a leafy area and now features state-of-the-art Q-railing balustrades that empower the its natural looks. The all-glass Juliet balconies are nearly invisible, leaving the attractive stonework on full display. The Easy Glass Pro frameless balcony railings allow for beautiful views of the surroundings. In the interior, Q-railing’s Q-line baluster railing system was installed on the internal staircases.

A requirement in Corstorphine Wright’s design brief was to avoid horizontal movement joints in the finished façade, which would have been the result had a traditional SFS Infill to concrete frame approach been taken. Working with Willmott Dixon at the early design stages of the contract, Metsec’s in-house design team proposed a continuous walling solution formed from SFS to support glazing and rendered elements that would form the external skin of the façade. Metsec’s solution included the use of fixing cleats to connect the SFS continuous walling to the structure’s concrete frame.

Gateway 12 is multi-million pound industrial development on a c.16-acre site located three miles to the South West of Gloucester, adjacent to the A38 dual carriageway and just one mile form Junction 12 of the M5.For the main structure of the buildings Trisobuild® R32 was used for the roof and Trisobuild® C32 was installed vertically on the walls; Trisobuild® HR50 was used horizontally at the higher level for the soffits in Merlin Grey. The offices area wall elevations were constructed using Trimapanel® insulated panel system.

Rugby Mill is a 60,181 sq ft new build warehouse. The external building envelope for this facility includes a two-storey office and dock levellers at the rear. Built using 9,000m2 of and insulated panels manufactured using and the front elevation features decorative cornice detail to the top right and top left hand corners of the building, in an agreed contrasting combination of blue colours (Solent Blue, Atlantis, Aquarius, Zeus and Sirius and Goosewing Grey).Adjacent to Rugby Mill, Ram Mill can accommodate up to 100,000 sq ft of occupiable space and has been pre-let. Built to the same design and using our and insulated panels, the front façade for this unit features our insulated panels in a different colour combination and features a decorative cornice detail that wraps around the top corners of the front elevation either side, in a green combination to reflect Pin Property’s distinctive brand (Heritage, Jade, Juniper, Sirius, Zeus and Goosewing Grey).

Buzon UK were commissioned directly by Chelsea Football Club to supply and install the DPH pedestal system to support over 430sqm of EBEMA concrete paving (supplied by Alfresco Floors) to a newly refurbished pitch-side terrace at Stamford Bridge. The terrace areas behind the pitch-perimeter was built up to 200mm to create a raised terrace specially designed for wheelchair users. Buzon pedestals are adjustable from 11 to 1120mm and thanks to their intrinsic strength and reinforced structure are recommended for use with heavier floor coverings such as large format concrete pavers and high live loads.

Lang+Fulton were asked to supply louvred screening to provide shelter and a visual barrier for the café and outdoor pool areas at the Portavadie Marina Resort. A 2.5m high screen of Italia-100 panels was installed to provide 100% visual screening. The louvres have a free area of 29%, which helps to reduce wind loading, but, in order to cope with potential storm force conditions, the RHS posts were specially designed in accordance with BS EN 1991-1-4. A store area for bins and a secure compound for service plant fored an additional part of the contract. The steel louvres were polyester powder coated in a muted grey (RAL 7015) to a marine grade standard of finish to blend with the surroundings and withstand the harsh coastal climate.

SMET supplied Streetscape® BS 7533 compliant laying course materials including; bedding course, jointing, and priming mortars, to Dumfries and Galloway Council for the Streetscape element of the Lockerbie Town Centre Public Realm project. The project, comprising of 2,500 m2 of hardscape paving was designed and realised by leading Environmental Consultancy, Ironside Farrar. The SMET Streetscape® portfolio complies with the rigorous requirements of BS 7533 with all products undergoing independent testing and certification to confirm compliance. By providing a superior level of customer service and focused aftercare to their Smet Supported Partners, Smet Building Products Ltd, with the Streetscape® brand, demonstrates best-practice in Streetscape construction partnerships. Contact SMET for more information on your Streetscape® BS 7533 Compliant Laying Course Materials.Click for more detailed information on the SMET Streetscape® BS 7533 range:Click for more on some of the projects we have supplied to:https://www.smetbuildingproducts.com/projects/by-product/streetscape-high-strength-bedding-concrete/Contact SMET for any Streetscape enquiries.

Clement Windows Group have replaced the original steel fenestration at the Old Marylebone Town Hall, recently leased by the London Business School from Westminster Council on a 35 year renewable contract. In order to increase teaching facilities by 70 percent, the building has undergone a major £60m refurbishment and Wates Construction were chosen as the Main Contractors to undertake the challenge of joining the two iconic buildings in an eclectic mix of the traditional and contemporary. The new building, designed by architects Sheppard Robson, is named the Sammy Ofer Centre in honour of the late Sammy Ofer KBE.

The frontage of the Ocean Terminal shopping centre in Edinburgh has received a radical makeover as part of a major investment to increase footfall by enhancing the visitor experience. The extension has been covered with STEREO-KINETIC cladding; hundreds of freely-moving stainless steel sheets suspended from grating panels. Gusts of wind, traffic, even people walking by cause the metal rectangles to ripple in an ever-changing display. The kinetic artwork has been designed in such a way as to allow the passage of natural daylight through the underlying window openings on the second floor level.

Jubilee Bridge was constructed in 1977 - chloride contamination was causing corrosion of the suspended and cantilever reinforced concrete support beams, half-joint elements and the soffits of the beamsICCP was used to protect cantilever beams, half-joints and suspended slab elements. Over 8,500 anodes were drilled in and are controlled in 20 zones with separate control of the beams and the half-joints.

Made-to-measure brushed satin stainless steel sinks and worktops, from GEC Anderson, have been installed in the breathing apparatus rooms, kit cleaning rooms and kitchens of the new Winchester Fire Station.The station relocated from its home of 74 years at North Walls to its new state-of-art facility inEaston Lane, Winnall,Winchester. The new five-bay fire station is operationally and strategically located on the outskirts of the city on a major access route, close to the M3. The new facility can accommodate 70-plus personnel and provides a continuously crewed facility as opposed to the previous just day-crewed arrangement, thus providing faster emergency cover over a greater area.Freestanding worktops, totalling more than 10 metres, were installed in the breathing apparatus (BA) room and kit cleaning area of the fire station. Industrial sized sinks were included to provide an effective washing facility for the fire crews specialist equipment. Sarah Collins, architect for Hampshire County Councils Property Services Department said, The specialised sinks were chosen for their ability to cope with an environment of high usage. We wanted a material that was robust enough to take the everyday knocks and last for the lifetime of the building. GEC Anderson sinks certainly met this requirement and are performing extremely well.

This was not actually a quayside application, instead the quayside profile was chosen as the curved profile doesn't create a 'natural ladder' and better discourages people climbing over from a pedestrian area into traffic.The curved profile was set up to have 2 solid rails and 4 tension cables which were used to bridge the gaps between the main rails equidistantly.Laser profiled steel posts with knuckles for rails and flanges to host the cables were manufactured as bespoke solutions. The outcome is a successful balance between a utilitarian piece of street furniture and a product with a decent amount of design and architectural integrity.

The Clement Windows Group has manufactured and installed steel windows from its W20 range for the Comet Works in Birmingham’s Princip Street. The original warehouse buildings in the city’s former Gun Quarter have been converted by building re-animator Javelin Block into 20 impressive residential units, including lofts, apartments and mews houses. The Clement W20 range was specified for its ability to provide an almost exact match to the existing metal windows while offering modern advantages such as double glazing and a very long-lasting polyester powder paint coating requiring minimal maintenance.

After many years of being out of use, the former police HQ (CID) building on Bridewell Island in Central Bristol has been renovated and is now the new YMCA Bristol hostel. John Perkins Construction carried out the work along with Ferguson Mann Architects and assistance from the Bristol City Council Conservation Team. Preserving the beauty of this Grade II Listed Building, which dates back to 1928, was paramount although it was vital that the completed building offered a modern specification for 21st century living. Clement Windows Group were selected to provide the new steel windows.

We supplied our Irish-produced Streetscape® BS 7533 compliant laying course materials including; bedding course, jointing, and priming mortars, to Scottish-based principal contractor, RJ McLeod (Contractors) Ltd for the hardscape element of the new Helix Park project in Falkirk, Scotland.The hardscape element of the Helix Park, comprising of open-space paving and connecting pathways, totalling 9,000 m2 of granite paving, was expertly laid by paving contractor, Granite Paving Specialist Ltd. The SMET Streetscape® portfolio complies with the rigorous requirements of BS 7533 with all products undergoing independent testing and certification to confirm compliance. By providing a superior level of customer service and focused aftercare to our Smet Supported Partners with the Streetscape® brand, we demonstrate best-practice in Streetscape Hardscaping construction partnerships. Click for more detailed information on the SMET Streetscape® BS 7533 range: https://www.smetbuildingproducts.com/products/streetscape/Click for more on some of the projects we have supplied to:https://www.smetbuildingproducts.com/projects/by-product/streetscape-high-strength-bedding-concrete/Contact SMET for any Streetscape enquiries.

The owners of this four storey, semi-detached, Victorian home have totally transformed it to create a wonderful, contemporary space, full of character, colour and texture.The works undertaken included the demolition of the existing lower ground conservatory and the construction of a full width rear extension. The new space provides a large kitchen, dining and sitting area, but also retains the connection to the front snug. A two storey extension was formed along the side return, providing a boot room and utility space on the lower ground level and a cloakroom and WC on the upper ground level. A bespoke, black steel door screen from the Clement EB24 range was designed to form a glazed elevation facing onto the raised garden from the kitchen. The feature doors, along with other elements, such as the wide oak timber flooring, Bauwerk painted walls and a specialist kitchen provided by Daulby and Tickle, have created an incredible result.The Architect, Daniel Harris said “We’ve worked with Clement Windows on several residential projects, this one being the most complex. The process from initial sketch design through to installation was excellent. Clement produced highly detailed drawings and were very responsive throughout the development of the design. The installation team worked in close collaboration with the Contractor and ensured all elements of the openings were prepared and ready for installation. The end result was an extremely high quality and complex product installed with very low tolerances to an impeccable standard.”Photograph: GG Archard

It was a pleasure for all involved to work on this outstanding project, an original Arts and Crafts home which has been impeccably refurbished.The recent works included extending the house, as well as opening up and changing the layout. The interior has been modernised with a contemporary touch, but cleverly retains and enhances the home’s character. The interior design of the whole home is stunning. The bedrooms and bathrooms have been individually designed and are unique to their user. Mural wallpapers, vibrant pops of colour and striking, high quality fixtures and fittings help achieve this.A combination of leaded EB20 steel windows and W40 steel doors with genuine T bars were chosen to replace the external fenestration. The new windows and doors have slim, elegant frames but bring the benefit of improved thermal efficiency and security. Internally, a bespoke W20 door screen has been used to divide the kitchen and dining area.Both the client and architect are delighted with the outcome. Steven Harp from Harp and Harp said: “This project involved a delicate balance of modernising a home that had been barely touched in a century for 21st Century family life whilst trying to retain the beautiful Arts and Crafts character and charm of the original house. The new doors and windows by Clement were a perfect product to fulfil this brief, providing modern standards or thermal comfort with an aesthetic and quality that blended seamlessly with the elegance of the original metal windows that were still on the house.”The client said: “I was initially unsure about changing the fenestration and doors in our property, as they are such an important part of the building’s character, history and aesthetics. However, from our first meeting with Clement Windows, who were recommended by our building surveyor, I knew I needn’t have worried. They talked us through the different options in detail, provided extensive designs (and were always prepared to amend and refine these subject to our thoughts!) and also worked seamlessly with our architects to ensure that all we asked for was delivered and more. The finished product far exceeds any expectations that we had for windows and doors that matched our original steel windows and doors, now giving us the perfect look for the house with the added bonus of double glazing and additional safety and security. Their communication throughout has been excellent and we have felt looked after every step of the way. Installation was done ahead of schedule and the only issue we’ve had post installation has been dealt with efficiently and they have always had someone available to pick up the phone to us and come to site when needed. Really cannot recommend this wonderful company enough, for both their products and the overall experience. Thank you!”

The early 20th century saw the development of a distinct architectural movement often termed ‘Stripped Classicism’. Running in tandem with the Modernist Movement of the Bauhaus School, the movement strove for bold massings, severe angles and a stylised reduction of classical elements. This style was frequently chosen by governments when designing official buildings.Perhaps the best known example of this type of architecture in the UK is the Grade II Listed Waltham Forest Town Hall, the headquarters of the London Borough of Waltham Forest Town Council. Designed by architect Philip Hepworth, construction of the building began in 1938 but was interrupted by the Second World War and so not completed until 1942. In 2019 the council approved an extensive programme of renovation works to the Town Hall which included the replacement of all the original steel windows. Clement W20 steel windows were chosen as the right product for their quality. The new white windows include both top hung and side hung opening casements with complementary fittings in a dark bronze finish.Senior Project Manager at Waltham Forest Town Hall John Cattermole said:“The team at Clement provided a great service in supplying new windows as part of the Town Hall refurbishment. Very specific aesthetic and energy performance criteria needed to be met when it came to the window replacement. The W20 windows supplied by Clement were able to meet all of these requirements.  Despite the project being on site at the height of the pandemic, the windows were delivered to programme which enabled seamless installation. Now the building has been brought back into use really positive feedback has been received from both staff and visitors.”

Built in 1900, London’s Bank Station provides access to the Central, Northern, DLR, Waterloo and City lines and is one of the world’s most complicated subterranean stations.The expansive Bank Station Capacity Upgrade (BSCU) programme, commissioned by London Underground, will increase capacity by 40 per cent. In addition, it will improve access, decrease crowding and generally deliver a modern public transport facility with better ambience.Whilst the BSCU scheme as a whole incorporated a wide range of elements – new entrance, three ticket halls, six lifts, 10 platforms, two 94m travelators and a 570m tunnel & platform for Northern Line – Sika’s involvement was on the whole block site.

The Copper Box. The Handball Arena was also constructed by Winchmore Brickwork and contains Naylor Hi-Spec Lintels. Designed by MAKE Architects, it is the only permanent indoor mixed sports arena in the Olympic Park to be retained, and Winchmore have just been invited back to make alterations and refurbishments in order to convert the building into the 'Multi Use Arena', or Copper Box as it is now called, as part of the Olympic Legacy for the Queen Elizabeth Park.