"single ply roofing"

Easy to handle, even for this incredibly large project.The Costco store in Wembley occupies a site close to the national football stadium. For the building’s flat roof, architects, Broadway Malyan, in conjunction with main contractors, JF Finnegan, required insulation comprising superb thermal performance and easy-handling ability - Recticel’s Eurothane Eurodeck more than fitted the bill.Ian Catterall from BC Contractors explained:"Eurothane® Eurodeck is a superb quality board. It’s really easy to install and presented no issues for what was an incredibly large project - the largest single-value project we have undertaken. It was an immense job, which required the highest-quality PIR. Eurothane® Eurodeck was just perfect.”About Eurothane® Eurodeck:Eurothane® Eurodeck is compatible with mechanically fixed single-ply systems, benefiting from high compressive strength and excellent dimensional stability that ensures the flat surface finish required for optimum performance in new build and refurbishment projects. It is faced on both sides with a multi-layer coated aluminum foil.

Hethel Engineering CentreBauder Thermoplan FPO single ply system with Bauder solar PV systemSynopsisHethel Engineering Centre supports high performance engineering companies located throughout Norfolk. The original building at the centre had been operating at maximum capacity and they urgently required a new building to satisfy increasing levels of demand. The client wanted the new facility to meet a high level of sustainability, achieving a BREEAM excellent rating and using key renewable technologies, such as photovoltaics (PV) to minimise its environmental impact.Bauder Building BoardProject:Hethel Engineering CentreLocation:Hethel, NorfolkProject type:New buildRoof size:2,500m²Specifier:NPS GroupApproved contractor:Voland AsphalteThe specificationBauder’s Thermoplan single ply membrane was specified for the new building’s 2,500m2 roof due to its longevity. Roof areas totalling 500m² were fitted with 160 PV Modules, enabling the centre to generate at least 44.23 mWh of solar power each year and annual CO² savings of 23.40 tonnes. The PV system was installed without any penetration of the waterproofing or roof deck, ensuring the integrity of the roof is completely upheld. The simplicity of the installation also meant that approved contractor, Voland Asphalte, could install the entire PV array in just one day.Products appliedBauder solar PV system160 solar photovoltaic modules were installed with an expected energy generation of 44.23 megawatt-hours and a kilowatt peak of 47.20 along with Bauder's Thermoplan single ply membrane.  Project challengesThe centre remained operational throughout the works, which caused logistical challenges, however all deliveries were timed as not to conflict with vehicles moving in and out of the facility. The work at HEC was completed on time and to budget, providing the client with an innovative roof that boasts extraordinary environmental credentials.System installedThermoplan Single Ply System 1 Bauder Thermoplan FPO FPO membrane with laminated fleece for adhered installations; pre-coated cross weave polyester reinforcement for high levels of tear resistance.2 BauderPIR M 60An efficient PIR flatboard insulation with aluminium foil facing on both sides and rebated edges to remove a thermal bridge.3 BauderTEC KSDA technically advanced self-adhesive elastomeric bitumen air and vapour control layer with an aluminium foil facing for vapour impermeability.AdvocacyKarl Manning at NPS Group: “Hethel Engineering Centre is a perfect example of a project where outstanding workmanship and top quality products can harmoniously come together to deliver an exceptional, sustainable roofing solution. The Voland team in collaboration with Bauder provided the highest degree of technical support throughout the project, helping us overcome any issues we encountered promptly and efficiently.”

The Ascent Up and On step unit was specified to create a safe means of access between different roof levels external to the roof of a city centre residential block. The building is has a single ply membrane roof covering and it was the clients desire not to penetrate the roof; hence the step over / stair unit is supported on rubber spreader feet which provide a non-penetrative support solution. The stair unit is designed in accordance with BS EN ISO 14122-1:2001 + A1:2010 and Building Reg Part K:2013 and manufactured following 1090 factory production control procedures.

Celebrating its 50th anniversary in 2019, the iconic Bell’s Sports Centre in Perth, needed a new roof to protect the building. With the previous roof membrane nearing 30 years old the centre needed a long-term and robust roofing solution. The product of choice was the mechanically fixed Sarnafil S327-15 EL Light Grey as it is more than able to cope with all the extremes of the Scottish weather and has been certified by the BBA to last in excess of 40 years. The durability of the single ply material ensured a long-lasting solution for the project.

Sika's full suit of products helped with waterproofing the scalloped roof at the campus. A combination of Sike Sarnafils waterproof Single Ply membrane, as a flexible and robust membrane, and Sikalastic- 621, as a highly-durable elastic liquid polyurethane system, was used. As well as the roof refurbishment, concrete repairs were also carried out with the use of Sika MonoTop-615 and Sikagard - 550. For the steel reinforcement Sika FerroGard-903 was also used. The refurbishment of the buliding was a great project for Sika to work on as it had solutions for each aspect of the project.

With previous roof re-coverings proving problematic, two key requirements were highlighted, building the thermal performance to help save energy, and improving robustness, to mitigate damage caused by vandalism. The architect worked closely with Sarnafil to ensure the chosen roofing products provided the required detail, specification and performance. A Sarnafil HD bonded system was specified guaranteeing a high quality and durable roof. By combining the thickest single ply membrane available – 2mm – and the robust insulation board – SarnaTherm HD – the Sarnafil HD system offered a long-term, resilient and well-insulated roofing system with very low thermal conductivity.

The Ascent Up and Over step unit / Industrial stair system was specified to create a safe means of access up & over items of mechanical plant & equipment to the roof of the airport terminal building. The Industrial stair unit is supported on rubber spreader feet which provide a non-penetrative support solution on the flat single ply membrane roof. The stair unit is designed in accordance with BS EN ISO 14122-1:2001 + A1:2010 and Building Reg Part K:2013 and manufactured following 1090 factory production control procedures.

The £11.6 million regeneration scheme in Aylesbury saw a former MoD site managed by the Homes and Communities Agency (HCA) transformed into an affordable and sustainable housing development, comprising 94 terraced houses and apartment blocks forming a continuous curved building. Named ‘The Serpentine’, this snaking housing project called for a flexible roofing solution! Sika Sarnafil single ply was specified for its flexibility and suitability to tricky detailing but the shape posed a number of technical challenges.

Castlebar Government OfficesBauder Total Roof System (BTRS) and BauderThermofol PVC single ply waterproofing systemSynopsisThe roof area of this government office building was complex due to expansion joints, air conditioning units and intricate detailing requirements. Work hours had to be agreed with the client to keep disruption to other ongoing work at the site to a minimum and insulation upgrades were necessary to satisfy building regulations. The office also had to remain open throughout the works, causing some logistical challenges. All deliveries were timed so not to cause any disruption to visitors coming in and out of the facility.Bauder Building BoardProject:Castlebar Government OfficesLocation:Castlebar, Ireland​Roof Area:2,500m²Specifier:Office of Public Works​Approved Contractor:Deane Roofing & Cladding​The specificationBauder’s bituminous system, BTRS, was specified because it is durable, robust and can withstand permanently sited loads of up to 2000Kg/m². The system build-up included Bauder’s 100 mm Thermotech Glass insulation for superior thermal performance, ensuring the roof achieved the required 0.17 U-Value. Small linking roof areas were waterproofed using Bauder Thermofol PVC single ply system, which is long lasting, possessing high tensile strength of over 1100N, and allows for no physical penetrations of the roof.Products appliedBauder Total Roof SystemIntegrated bituminous waterproofing system with a life expectancy in excess of 40 years.Bauder Thermofol PVC1.5 mm single ply membrane can be guaranteed for up to 20 years depending on system type.System installedBauder Total Roof System (BTRS)1 Bauder K5KA heavy duty, torch-applied SBS elastomeric bitumen capping sheet, featuring a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture. The mineral finish provides protection against UV degradation.2 Bauder ThermotechPIR insulation board with a coated glass tissue facing on both sides.3 BauderPIR FA-TEAn efficient PIR insulation board with aluminium foil facing on both sides. The top facing features a printed grid pattern to aid site cutting. It is lightweight and has zero ozone depletion potential.4 BauderTEC KSD FBSA self-adhesive SBS elastomeric bitumen air & vapour control layer, with a mica finish.Bauder Thermofol PVC single ply waterproofing system1 Bauder Thermofol U15 FRA 1.5mm thick, reinforced PVC waterproofing membrane. Stated within BBA certificate 06/4354, the Thermofol PVC waterproofing membranes have a service life in excess of 35 years. 2 Bauder PIR MTissue-faced flat board insulation, benefitting from a zero ODP and a Green guide rating of ‘A’.3 BauderTEC KSD FBSA technically advanced self-adhesive elastomeric bitumen air and vapour control layer with an aluminium foil facing for vapour impermeability.AdvocacyProject specifier, Tony Collins, Office of Public Works:“Bauder delivered a comprehensive roofing solution that utilised their top quality products and unrivalled technical support. Despite the design and logistical challenges encountered, the new roof system was delivered on time and to budget much to the delight of the client” 

Den CourtBauder Thermofol single ply waterproofing systemSynopsisConstructed in 1977, Den Court is a large retirement home made up of 24 flats in the small town of Lochgelly in Fife. The regeneration of the sheltered housing by Fife Council involved the demolition of part of the building as well as replacement windows and doors, landscaping and a new car park.Bauder Building BoardProject:Den Court Care Home, CardendenLocation:Lochgelly, Fife, ScotlandProject Type:RefurbishmentRoof Area:1200m²Specifier:Fife CouncilApproved Contractor:Greenroof UKThe specificationThe client was clear that lead effect rolls were essential for this projects roof. In order to achieve this whilst keeping with the original roof of the building and with the other buildings of the area, Bauder’s Thermofol PVC system was specified and approved contractor Greenroof (UK). The resultDuring installation, the approved contractors hand-crafted over 2,000 linear meters of timber battens wrapped in the Bauder THERMOFOL U15 Fleece Back waterproofing membrane. These were then installed on to the 1200m² roof area.Thanks to the hard work and craftsmanship deployed by the approved contractor and the high-quality products used on the project, following a roof inspection from an expert Bauder Site Technician and a leak test, Bauder was able to issue a 20-year product and workmanship guarantee to the roof. System installedBauderThermofol single ply waterproofing system1 Bauder THERMOFOL U15 V FR1.5mm fleece-backed reinforced PVC membrane2 BauderPIR MTissue-faced flatboard insulation3 BauderTEC KSDElastomer bitumen air & vapour control layer, self-adhesive membrane

HMS Caroline – Museum ship... CHALLENGE HMS Caroline, the last surviving vessel from the 1916 Battle of Jutland, now rests in the Titanic Quarter in Belfast. After a second life as floating Headquarters of the Royal Navy during World War II, this living legend will continue to serve the country as a museum ship. For this purpose, however, extensive restoration appeared to be essential. The key requirement on HMS Caroline was to avoid penetration of the deck surface. To safeguard its historic heritage against damage, the Royal Navy sought a reliable waterproofing solution. SOLUTION Versatile and impenetrable! What used to be the properties of this battle cruiser, happen to apply to the RENOLIT synthetic single ply roofing membranes as well. That’s why RENOLIT ALKORPLAN was heralded as the optimal solution for the refurbishment of the ship’s gun deck. The lead grey RENOLIT ALKORPLAN A provided an ideal modern day solution with an impressive finish. On top of a new layer of insulation board, the calendered and laminated fleece-backed PVC membrane was fully bonded with a combination of the RENOLIT ALKORPLUS81068 polyurethane adhesive and the universal RENOLIT DUALFIX81065 glue. RENOLIT ALKORPLAN stands out above the competition given its excellent weldability, simplicity of detailing and overall versatility. Once installed, ongoing maintenance of the membrane will be minimal with a predicted life expectancy in excess of 35 years (BBA approved). On 31st of May 2016 the freshly refurbished HMS Caroline stole the show as a fitting backdrop for a commemoration honouring its centenary. 

The Big Chill, a bar in King’s Cross, was creating a public roof terrace on an existing structure. The deck was complicated with many changes of level and multiple objects present. A single ply membrane was installed. Paving and decking was required. Adjustable pedestals were laid directly onto the surface and their heights altered so that the upper surface of the 50mm paving slabs and the 125mm decking frame would be level. Nothing penetrated the membrane and the weight tolerance of the ASP and TD pedestals meant even very heavy traffic on a public bar was accommodated.

At a dizzying 160m (525ft) tall, London’s distinctive Walkie Talkie building required an exceptional roofing solution. Designed by architect Rafael Viñoly and costing over £200 million, 20 Fenchurch Street is a 34-storey commercial skyscraper in London, known as the ‘Walkie Talkie’ building due to its top-heavy form. It is designed to have a BREEAM excellence rating. Sarnafil G410-12EL single ply provided the perfect solution to this design criteria, thanks to its excellent flexibility and weldabilty, while offering outstanding resistance to weathering, including permanent UV irradiation.

The Ascent stair unit - Industrial stair system was specified to create a safe means of access over roof mounted mechanical and electrical plant and equipment. The roof area is tightly packed with Air conditioning plant creating a unique challenge to design a safe means of access across it. The Ascent step over / stair unit is able to accommodate spans up to 4.5m and was able to be utilised to create a safe access route. The step over unit is supported on rubber spreader feet which provide a non-penetrative support solution on the flat single ply membrane roof. The stair unit is designed in accordance with BS EN ISO 14122-1:2001 + A1:2010 and Building Reg Part K:2013 and manufactured following 1090 factory production control procedures.

As a company passionate about UK manufacturing, Aston Martin’s choice to work with Polyroof - the only independent UK manufacturer of cold-applied liquid systems - was a natural one.The new roofing system had to be cold-applied to eliminate the risk of accidental fire during installation. New insulation was also desirable to further improve the thermal performance of the roof. It was essential to reduce disruption to the operations of the facility, meaning any new system must be rapid to install with the existing roof predominantly being kept in place.After leaks were reported, The findings of Polyroof’s survey were presented to Aston Martin in the form of a bespoke specification, where the Protec Warm Roof System was the recommended solution. Core tests taken during the inspection had revealed that despite the leaking through the existing PVC single-ply membrane, the existing build-up of 60mm PIR insulation was found to be dry and in sound enough condition to be retained as the base for the new roofing system, saving the client time on the project.It was also identified that the current insulated roof configuration was missing a Vapour Control Layer, meaning the roof was at risk of condensation issues. This problem was designed out by the installation of 120mm Polyroof RES Insulation above the existing single-ply membrane, which was made good to form an effective vapour control layer.By creating a “hybrid” roof with double the insulation above the vapour barrier than below, the risk of condensation was eliminated and this was demonstrated by analysis conducted on the proposed build-up.To eliminate the standing water issues, sumps were placed around the existing outlets, greatly improving their drainage capacity, and offering a highly cost-effective solution when compared to the need to alter the falls of the roof.Polyroof Technical Services visited site regularly to advise and assist architects, specifiers and contractors in all aspects of the project.The finished roof provided a seamless and extra-tough waterproof membrane that was supported by the trusted Polyroof Accredited System Guarantee, with a separate insurance-backing scheme provided at no cost to the client. Aston Martin Lagonda now have the peace of mind that the roof above this landmark facility will be leak-free for decades to come. 

Manchester’s iconic Midland Hotel sits in the heart of the city centre and has been a well-loved retreat for visitors since opening its doors in 1903. Following decades of service to the city, the hotel had started to show signs of its age, with multiple areas of water ingress across the site that needed to be addressed, to preserve the building for years to come. It was essential for the hotel to remain fully operational during the roofing refurbishment, with minimal disruption to its customers.The original single-ply system had failed across the courtyard and atrium roofs, leading to the insulation becoming fully saturated with water. The metal deck’s structural integrity had also been compromised and a structural engineer was appointed to review the extent of the damage, to confirm the area as condemned and in need of immediate replacement.A bespoke Garland UK specification was designed to upgrade the insulation and U-Value of the hotel to comply with current regulations, remove ponding water on the roof systems with a new tapered insulation design and provide peace of mind to the building owners with a 25-year Garland Single-Point Guarantee.

Bradfield College, located in the heart of Berkshire, is a school for 13-18 year olds, providing an 'education for life'.Set up in 1892, the school has its own church as part of the grounds, which has remained closed for a number of years.However, work has been completed recently to connect the church to the school, and convert it into a learning hub for academic purposes - providing students with the space to work individually or collectively to further their learning, preparing them for life in the 21st century.ChallengeNationwide metal & single ply roofing contractors Salmon Solutions provided the solution when it came to the cladding - using elZinc® standing seam cladding in Rainbow Gold to elevate the cladding, giving a sophisticated modern feel to the metal and glass exterior.SolutionTo get a secure fix, Salmon Solutions turned to use Fixfast SPIDI® Max brackets and rails as part of the vertical cladding solution. SPIDI Max brackets are versatile to be used in a wide range of applications, as well as being suitable for horizontal or vertical applications - one bracket for both fixed and sliding points, and available in 3 material grades: aluminium, A2/304 stainless steel, or A4/316 stainless steel."We have a great working relationship with Fixfast and use their products on the majority of our projects. Fixfast - as always - were reliable and efficient with both service and the technical info, which allowed us to incorporate not just their fixings but the SPIDI helping hand system into this project."Charlie Whitman - Salmon Solutions Ltd

George Abbott SchoolBauder Thermofol single ply waterproofing system with Bauder Euroglaze rooflightsSynopsisLocated in Guildford, George Abbot School is a secondary education school which provides education for 2000 people aged 11 to 18. The school had a history of leaks in the DT rooms above which a profiled sheet metal roof was installed.Following many attempted repairs, Bauder was commissioned to carry out a roof survey on the 228m² profiled sheet metal roof. The report identified issues with not only the gutter area, which was originally believed to be the problematic area, but also with the adjoining profiled roof and also with the large rooflight unit.Bauder Building BoardProject: George Abbott SchoolLocation: Guildford, SurreyRoof Area: 228m²Specifier: Baily GarnerApproved Contractor: Inspire Contract ServicesThe specification Bauder submitted a proposal to refurbish all areas of the failing roof:The gutter area needing standing water to be removed for which Bauder tapered insulation was proposed to create effective drainage falls.The adjoining profiled sheet metal roof requiring a new waterproofing system. The Bauder Profiled Roof Overlay system was determined to be the best solution, using bespoke profiled insulation boards specifically designed to fit the shape of the roof. The Thermofol U15 Fleece Back membrane was then specified as the waterproofing layer providing a robust yet lightweight waterproofing system to the roof.The existing rooflight unit, being one of the problematic areas of the rooftop, was also replaced with Bauder Euroglaze rooflights. Products appliedInsulation infill systemIntended for refurbishing profiled sheet metal roofs or increasing the thermal performance of existing insulated cladding systems.Bauder Euroglaze rooflightsModular rooflight designed to provide high standards of illumination, insulation and ventilation to the interior of flat roofed buildings. These are made to order and the size can therefore be tailor made to fit any roof aperture. The resultBauder approved contractor, Inspire Contracts, installed the roof system and rooflights. Bauder’s expert site technicians carried out over 10 site visits during the 4 months of works on the site. Following a final site visit and a leak test Bauder was able to issue a 20 year product and workmanship guarantee to the client.The choice to use Bauder, a single source of manufacturing for the roof systems and the rooflight, proved beneficial as it enabled Bauder’s flat roof technician team to design out a number of the detailing issues responsible for the historic leak problems and it also eased the installation process for the client and the approved contractor, as Bauder provided its integral service from the roof survey to the final site visit and the issue of the guarantee.System installed Bauder Thermofol PVC single ply waterproofing system 1 Bauder THERMOFOL U15 FRA 1.5mm thick, reinforced PVC waterproofing membrane. Stated within BBA certificate 06/4354, the Thermofol PVC waterproofing membranes have a service life in excess of 35 years. 2 Bauder PIR MTissue-faced flat board insulation, benefitting from a zero ODP and a Green guide rating of ‘A’.3 DeckProfiled sheet metal

City Tower, a private apartment tower block located in Canary Wharf required a new high performance waterproofing system as the existing single ply roof had been damaged beyond repair due to a fire. To provide a cost effective, long term waterproofing solution, Proteus Waterproofing specified a Hybrid Tapered Insulation Scheme with a Proteus Pro-Felt® finish, meeting the client’s specific requirements.High Performance WaterproofingAs the existing roof was beyond repair, it needed be completely stripped. Pro-Prime® SA and Proteus Pro-Felt® Self Adhesive Underlay were used as a vapor control layer. Proteus Pro-Therm EPS and Proteus Pro-Therm PIR were used for the Hybrid Tapered Insulation Scheme and bonded using Pro-Bond Foaming Adhesive. Proteus Pro-Felt® 3mm Plain Underlay was then fully adhered to the insulation, followed by a final installation of Proteus Pro-Felt® Ultima Plus Fireguard. Proteus Waterproofing worked closely with the Proteus Approved Contractor to ensure the project was delivered to a high standard.Health & SafetyWhen working on residential buildings, safety is always of utmost importance. Proteus Pro-Felt® Ultima Plus Fireguard has the highest European Fire Rating, BROOF(t4), making it the ideal felt to use on residential properties as the risks to operatives, building occupants and members of the public are greatly reduced. All Proteus Waterproofing specifications promote fire safe installation methods conforming to the industry lead Safe2Torch guidelines.Long Term PerformanceProteus Pro-Felt® Ultima Plus Fireguard is a high-performance multi-layer bituminous membrane system, tested to perform in extreme temperatures and weather conditions. It has class leading modified bitumen content which allows the flexible membrane to move with the building and ensure long term durability and performance. It is certified by the BBA to be in excess of 30 years, and had the highest European Fire Rating – BROOF(t4).

A £40 million investment, 13 roof areas, eight different roof levels, and a steady stream of visiting students to keep happy throughout – the University of Reading (UoR) Library’s complete refurbishment was a large and challenging project spanning three years.Originally opened in 1964 and later extended in 1985, the library’s internal and external revamp was designed to increase space, improve facilities for individual study, provide better access and security across the building, and improve energy efficiency.In addition to a new-build Café extension, a new entrance canopy, a new ground-to-roof level lift and stair core extension – each featuring a new flat roof area – there were also 10 existing flat roof areas refurbished, coupled with the replacement of windows and re-cladding of the building’s exterior.Following a competitive tender based on an outline specification, Owlsworth Roofing, Sika Sarnafil single ply flat roofing specialists, impressed with the level of detail included in their quote and were awarded the contract by main contractor ISG.Roofing:Sika® Sarnafil G410-12 ELF.Sika® Sarnafi G410-12 EL.Sarnavap®-5000E SA.Sarnavap® HD SA.Primer 600.Sikatherm® PIR Insulation and Sarnacol®-2162.

Coláiste an Chláirín Bauder Thermofol single ply waterproofing system with BauderROCK insulationSynopsisThe new Coláiste an Chláirín building in Athenry, Co Galway is a post primary school consisting of classrooms, a special needs unit, sports hall, general-purpose hall, staff amenities and extensive external facilities designed by Smith Kennedy Architects & Healy Partners Architects. The project was managed by JJ Rhatigan and Company and the roofing element appointed to Priority Roofing and Cladding Ltd. The roof of the main building and the gymnasium required flat roof build-ups to meet the specifications as set out in in SDG 02-05-03 (Acoustic Performance in New Primary & Post Primary School Buildings), while meeting the general performance requirements specified within TGD 021-7 2018 (Minimum Performance Standards of Roof Materials and Finishes). The chosen system had to meet an acoustic performance of 35dB indoor ambient noise level (IANL). It was decided that, despite sports halls having a slightly higher IANL threshold, the 35dB performance criteria would be applied across all areas of the school, with control of reverberation being a key consideration in the gym.Bauder Building BoardProject:Coláiste an ChláirínLocation:County GalwayProject type:New BuildRoof size:8550m²Main contractor:JJ Rhatigan & CompanyApproved contractor:Priority Roofing & Cladding LtdThe specification:The Architect specified that the insulation used in the flat roof system should be non-combustible and achieve a U-value of 0.16Wm²k which actually exceeds the thermal requirements as described in the Irish Building Regulations Technical Guidance Document L for flat roofs in schools.BauderROCK was specified to achieve the thermal and acoustic requirements of the design. As a Euroclass A2-s1,d0 non-combustible material, BauderROCK also provided the specified fire performance. This insulation could be used across all roof areas, with some adaptations for the gym which required additional acoustic performance due to the inherent nature of the space. Acoustic infills were used in the troughs of the perforated metal deck, thus combatting the reverberation of the indoor environment.  Products appliedBauder Thermofol PVCAn integrated single ply waterproofing system, featuring a lightweight, cost effective membrane which offers a pleasing aesthetic finish on a flat roof. This system holds fire classification BROOF(t4) for compliance with building regulations under TS 1187 test method 4 for external fire exposure to roofs. BauderROCKHigh density mineral wool insulation.Project challengesOne of the challenges of this project was the ambitious schedule. The use of the self-adhesive air and vapour control layer (AVCL) enabled the trades working within the building to progress quickly without being delayed by weather conditions. BauderROCK is relatively quick to install, as was the lightweight single ply waterproofing.  The resultThe project was finished to time and specification with exceptional workmanship from the fixers at Priority Roofing and Cladding and superb collaboration from all parties throughout. The membrane was finished with standing seams to create a statement look. The roof achieved a U-value of 0.15 W/m2k, exceeding the thermal target, and met or exceeded the 35db IANL requirement across the main building and the sports hall.  The thermal performance, which will hold up for decades to come, will also impart energy efficiency benefits that reduce running costs at the school in the long term. Finally, the non-combustible nature of the mineral wool insulation ensured that the build-up met the fire safety specification. System installed Bauder Thermofol PVC single ply waterproofing system1 Bauder THERMOFOL U15 V FRThis 1.5mm polyester reinforced Poly Vinyl Chloride membrane (PVC) membrane benefits from being highly flexible due to the incorporation of internal plasticizers during the manufacturing process. The combination of materials within this membrane provides high tensile strength, with thermal stability and chemical resistance.2 BauderROCKA mineral fibre non-combustible insulation with high acoustic performance. The dual density mineral wool composition delivers compressive strength, whilst keeping the overall weight to a minimum and providing high noise absorption which enabled the complete system to meet project requirements.3 BauderTEC DBR 06This 0.6mm, self-adhesive, elastomeric air and vapour control layer is light weight and benefits from cleaner, safer, and faster installation than traditional torch applied membranes. Advocacy Niall Hanley, Contracts Manager at JJ Rhatigan, the project’s main contractor, said:"Coláiste an Chláirín Athnery was a great success and in particular the use of the self-adhesive AVCL in advance of the build-up allowed works to commence immediately internally, which was critical from a programme perspective.” Kevin Ryan, Director at Priority Roofing, explained:"We found the system both practical and efficient to install. The combination of the availability of the products and the technical backup received was superior to any other system that we have worked with.”  Eoin O’Grady, Associate Director at Healy Partners Architects commented:"We are delighted with the overall delivery of the roof build-up and the performance achieved. The PE hall solution to deal with reverberation noise as well as rainfall noise was very successfully managed. We look forward to working with Bauder on future projects.” 

Five domed design... CHALLENGE The idea of the architect was to design a building with 5 parabolic roof surfaces or domes. The unique five domed design comprises of pods finished in a range of different materials, each contributing to the development’s remit to blend into the park landscape. The biggest issue for the architect was how to connect these different materials to become a complete watertight building. SOLUTION Each dome is waterproofed using a RENOLIT ALKORPLAN system and whilst the complex is thought to be the UK’s largest timber-built geodesic project, it also demonstrates possibly the most innovative use of single ply membrane ever seen in the UK. By using the RENOLIT ALKORPLAN membrane as the main layer to waterproof the five domes an easy joint could be made by means of hot air. On one dome our RENOLIT ALKORPLAN A membrane was used in combination with PVC profiles providing geometric aesthetic detailing. On another dome a RENOLIT ALKORPLAN L membrane was used under a green roof system. On the other domes the RENOLIT ALKORPLAN F membrane was used in combination with our RENOLIT ALKORSOLAR fixing system supporting respectively glazed aluminium sheeting and cedar shingle tiles.

A single storey timber frame house, based on Passivhaus principals with specialised wheelchair access, situated in Fife, Scotland.

The project consisted of two similar flat roof areas totalling 1,100m2 above high-rise residential blocks in a city centre location. The existing roofs were an inverted roof design that had been waterproofed with single-ply that had failed prematurely. Numerous short-term, localised repairs had failed to stop the water ingress and leaks had been a long-term problem.It would have been impractical to remove the tons and tons of ballast and insulation from the top of the high-rise building and it was imperative to the client that removal or replacement works were not involved at all. The specific nature of this project required careful consideration, and so a survey of the roof was arranged.The SolutionA report from an independent consultant commissioned by the client identified a problematic challenge with an overlay option. The existing falls of the roof were assessed to be poor, and so standing water would be an issue for any new waterproof covering. The report concluded that this would reduce the lifespan of an overlay waterproofing system and so was advised against. The client initially thought this to be a stumbling block and that costly and impractical modifications to the roof would need to be made.Having worked with Polyroof on scores of other projects, the client turned to Polyroof Technical Services for a solution that could meet their stringent criteria. Following on from the preliminary discussions, Polyroof’s Technical Services assessed the site, taking core samples and then providing a suitable specification to overlay the roof with the Protec System.The BBA certification of the Protec system specifically covers use for zero falls (completely flat) applications, meaning the client had absolute peace of mind that standing water would not be a detriment to the integrity of the waterproofing system. The client was able to achieve the original objective of an overlay system and benefited from the associated cost and time savings. Furthermore, the BBA certificate states that when used in inverted roof scenarios the lifespan of the Protec system is as long as the design life of the roof.Work was started with J R Flat Roofing, a Polyroof approved contractor with national coverage, moving the ballast and insulation to one-side in four phases of 140m2 at a time, exposing the single-ply membrane to which the Protec system was directly applied.Due to Protec’s rapid cure and walk-on times (30-60 mins dependent on conditions), the system is ideal for larger, phased refurbishment, as specific sections of the roof can be made waterproof with the full Protec system in one day. When carrying out the next section, the new Protec membrane forms a totally seamless and watertight joint to the existing Protec-covered areas.Another objective was to reuse the original inverted insulation and ballast pebbles as this was cost saving and negated the need for the lifting logistics that would have been involved in bringing the ballast to ground level. Additionally, it made the process as environmentally compliant as possible by keeping waste to a minimum. The insulation and pebbles were re-applied in its original format and, due to the weight of the pebbles, was a mammoth task that required three miniveyors to help with the handling. A series of special aluminium breather vents were also fitted down to the concrete slab roof substrate to enable the surface to dry out over a period of 12 months.The whole job was completed in three weeks and the client was delighted with the finished work. With a 20-year insurance back-guarantee and a maintenance-free waterproof membrane that will last as long as the roof stands, the client was once again left with total peace of mind that their buildings could not be better protected.

ProjectSurespan designed and manufactured a single leaf hatch that was installed in a residential home in Solihull, for access to an underground level gym.ProductThe HIACE external single leaf access hatch to fit a structural opening 1200 x 3400. The pan-type door was recessed for 40mm paving slabs infill with an EPDM unbroken seal to help prevent the ingress of dirt and moisture. The floor hatch was fitted with a retractable safety grid operated by a 24v actuator. FeaturesRated at pedestrian loading, operated by two 24v DC Actuators. 40mm paving slabs infill. Retractable safety grid Supplied with a Zen-controlled 240vAC/24vDC electrical supply, and transformer.

Individual or hinged panel single glazed sliding system with the option of with crittall bars. This single glazed sliding system can achieve 34dB.The benefit of our MG900 panels is that they work in the same way as conventional movable walls and can be either single or double point suspension. With the slim back painted border you have clear view visual lines. This allows a superior light flow around the office, cost-effective installation and flexibility in the work environment. Plus the simple fact that they look elegant and classy. Not only these, but they also offer exceptional sound reduction allowing for privacy to be had amongst clients or for important internal meetings.The MG900 glazed system is a 35mm thick panel that can be incorporated into your standard fixed glazed partitioning system.So this unique 35mm thickness gives endless designs and layout options.Furthermore, the aluminium frame can be coloured to your choice to match your design or branding needs. These panels retain a room’s spacious sense of proportion and maximise light and clear viewing lines. Truly a magnificent office aesthetic.MG900 Key FactsAcoustic reduction from 34dBSlimline 35mm thick panelsTop hung with a shallow 4mm floor guidePanel widths 450mm to 1200mmHeight up to 3000mmPanel border finish any chosen RAL finishCrittall bar glazing designs to suit your design needs

Emma House, Romford, a residential apartment block built in 2007, needed a new waterproof membrane for the entire roof area after the single ply membrane, installed just 10 years earlier, had failed. The specification by our clients asked for a cold applied system to be used during the refurbishment to minimise disruption to residents, while providing a permanent waterproofing solution.The ChallengeCore samples taken of the roof build-up showed there had been extensive water penetration which required urgent remedial action. Impossible to repair, the complete roof system had to be stripped back to the roof deck by Proteus Waterproofing’s approved contractor. The approved contractor installed a new Proteus Pro-System® BUR (built up roof system) incorporating Proteus Pro-Therm insulation, to provide a new seamless roof – an area of some 150 square metres – offering a 20 year guarantee.Why Proteus Pro-System® was specifiedProteus Pro-System® was installed using no heat, providing a seamless waterproofing membrane on completion. Proteus Pro-System® is a high performance, seamless and cold-applied waterproofing membrane for flat and pitched roofs. It cures to provide completely seamless waterproof protection and has excellent thermal and UV stability, making it suitable for use in all climates.Proteus Pro-System® does not brittle, deteriorate or discolour with age. It uses atmospheric moisture to trigger its cure process and unlike conventional polyurethane systems can cure under water, without gassing or foaming. It also becomes resistant to rain damage and may therefore be applied in relatively poor weather, without any subsequent loss of performance or durability – making it ideal for Emma House.About Emma HouseEmma House consists of 14 one-bedroom and 19 two-bedroom apartments just minutes away from the centre of the market town of Romford, which offers shops, services and a wealth of bars and restaurants. When first built in 2010, Emma House offered young professionals an opportunity for affordable housing close to London and has remained at the forefront of the property market in Romford ever since.

One of our latest projects was for a school in Barking, East London. The school required new waterproofing on their roof and chose OptiTec because we have a range of suitable products to choose from, offering excellent durability and longevity at a great price.Specification – Systems UsedFor this project, a long-lasting system was required with a Broof T4 fire classification for safety. Our technical team advised the OptiPlan-FB (PVC Single Ply) system for this project as it met the brief safety-wise, but it’s also excellent value for money over a large area.The OptiPlan-FB system is a fibreglass reinforced, fleece-backed synthetic waterproofing membrane made from premium quality PVC-P, offering exceptional resistance to weather and UV rays. A great benefit of this system is that it can be installed year-round due to having excellent flexibility in cold temperatures.This system was installed by an OptiTec Approved Contractor to ensure the highest quality of fitting with the option for a labour and materials guarantee if required.Challenges PresentedThere were no real challenges presented during installation and everything ran smoothly. We have a technical team on hand at all times to provide support and advice where required so we can always overcome any challenges presented in the best way possible.ResultsThe results of this project are fantastic and the client has expressed their satisfaction with the professional installation of the system and the overall finish.

About the projectIn the summer of 2016, Paterson Gordon Architecture were approached to renovate an existing steading that stood in a derelict state. However, the stunning views of Loch Lomond created an inspiring opportunity to design and build a modern family home.Which FAKRO products were used?This property required an increase of natural light for a dark space within the building which could not fulfil its highest potential. By specifying DMF-D U6 and DXF-D U6 flat roof windows, Paterson Gordon Architecture was able to deliver a substantial proportion of natural light into the central hallway. DMF - D U6 Manually-operated Flat Roof WindowManual opening flat roof windows.The type F window is equipped with an energy-efficient triple-glazed DU6 glazing unit.The external glass is 6mm toughened while the internal glass is laminated and anti-burglary P2A Class.Heat transmittance co-efficient for the whole window is U-Value 0.88W/m²K. (glass U-Value 0.5W/m²K).Acoustic rating 34Db (-1.-3).The multi-chamber UPVC upstand is RAL 9010, the internal finish is RAL 9010 white PVC.The step and profiles are in black 9005, the glazing edge colour, called darkness, effect which comes from RAL 9005 (black) the coating has hue of grey.Can be used on roofs with pitches between 2-15°.DXF-D U6 Non-opening Flat Roof WindowNon-opening flat roof window.The Type F Window is equipped with an energy-efficient triple glazed DU6 glazing unit.The external glass is 6mm toughened while the internal glass is laminated and anti-burglary P2A Class.Heat transmittance co-efficient for the whole window is U-Value 0.88W/m²K. (glass U-Value 0.5W/m²K).Acoustic rating 34Db (-1.-3).The multi-chamber UPVC Upstand is RAL9010, the internal finish is RAL9010 White PVC.The step and profiles are in black 9005, the glazing edge colour, called darkness, effect which comes from RAL 9005 (black) the coating has hue of grey.Can be used on roofs with pitches between 2-15°.The existing part of the barn specified conservation-style roof windows to suit the original roof openings. To meet this requirement, FAKRO conservation windows were specified and installed. The characteristic feature is a black vertical mullion bar down the middle of the window and its black cladding. Making it suitable for traditional construction. Most of FAKROs standard windows are available as a conservation window.Why were FAKRO products specified?Primarily, the appearance of the flat roof windows was behind the reason for choosing FAKRO, along with the diverse product range and the ability to install the windows onto zinc, slate, and single-ply membrane roofs.

The new £8.5m Allam Diabetes Centre at Hull Royal Infirmary plans to treat and care for patients with diabetes and metabolic bone diseases.It also includes a significant amount of clinical research facilities supporting not only diabetes and endocrinology, but also vascular surgery, neurology and other research departments. Its curved towers flank a glass entrance, which leads to a large waiting area and reception. Spread over three storeys are consulting rooms, specialist treatment rooms, office space and changing rooms as well as a roof terrace on the second floor. Designed to achieve a BREEAM rating of ‘very good’, the thermal performance of the insulation specified for the Allam Diabetes Centre’s flat roof was hugely important. Another crucial factor was fire safety. Although the application doesn’t fall under current fire regulations banning combustible insulation, the architect specified that only non-combustible materials should be used during construction.  Main contractors Zenith Developments appointed specialist contractors Fosters Roofing to install the roof. They in turn tasked DANOSA UK with supplying all the materials for the roof construction, including the insulation. “The build-up of the Allam Diabetes Centre was a single-ply warm roof with a tapered insulation scheme to provide the fall required for rainwater run-off,” explained Steve Downey, Commercial Director at DANOSA UK. “Tapered insulation schemes are always more difficult than traditional flat roofs, so we asked Knauf Insulation for technical advice on how to achieve the required U-value of 0.18 W/m2K.” The Knauf Insulation Technical Support Team recommended Rocksilk® Flat Roof Slab. It is BBA certified for use on mechanically fixed flat roof build-ups and is suitable for all types of roof deck.  As well as excellent thermal performance, Rocksilk® Flat Roof Slab is non-combustible with the best possible Euroclass A1 reaction to fire classification. It also provides excellent sound absorption so will help reduce the drumming effect of rainfall.  Rocksilk® Flat Roof Slab contains a special water repellent additive and is manufactured using Knauf Insulation's Krimpact® Technology which provides high levels of compressive strength and durability. As the project was a tapered insulation scheme, Rocksilk® Flat Roof Slab was manufactured to order to ensure the correct fall was created. The tapered insulation scheme wasn’t the only challenge with the Allam Diabetes Centre – it also features a curved façade, which added complexity for the installation team at Fosters Roofing.  Paul Foster, Managing Director at Fosters Roofing said: “Insulation needs to be carefully cut to the exact shape of the building otherwise heat can escape making it less energy efficient. Thankfully Rocksilk® Flat Roof Slab was easy to cut and quick to install, so it wasn’t a problem.” Rocksilk® Flat Roof Slab has also been designed to knit together during installation so there are no gaps that could affect thermal, fire or acoustic performance. By using Rocksilk® Flat Roof Slab, Fosters Roofing and DANOSA UK were able to achieve the required specification for the tapered insulation scheme on the new Allam Diabetes Centre. This will contribute to the energy efficiency needed to achieve the BREEAM ‘very good’ rating. 

Chelmsley Wood Shopping CentreBauderflex bituminous waterproofing systemSynopsisChelmsley Wood Shopping Centre, located in East Birmingham, was experiencing leaks with their current flat roof waterproofing system and so they needed a quick, high quality solution to remedy the situation. Although competitors had suggested the only option was to strip the roof, Bauder found a more cost-effective answer by using our in house Troxler Moisture Gauge to identify any areas of wet roof construction, removing the saturated areas and then overlaying the whole roof area.Bauder Building BoardProject:Chelmsley Wood Shopping Centre Location:BirminghamProject Type:RefurbishmentRoof Area:4500m²Specifier:Black Cat ConsultancyApproved Contractor:BBR Roofing LtdProject challengesThe works were to be undertaken in the middle of winter on the existing single ply covering which kept freezing when the operatives were drying the surface. Fixing down of the insulation boards (to the existing waterproof covering) was a noisy operation which also exposed the retail tenant below to risk of water ingress. Work had to be undertaken on a roof where ridges and valleys had to be navigated whilst managing the waterflow.The specification allowed for the removal and replacement of the saturated areas as identified by our moisture mapping survey. This operation had to be planned to ensure that the retail stores were not put at risk in terms of water ingress, but still managed to keep the works progressing to schedule. This was particularly difficult due to the exposed site and the inclement weather encountered. The resultAs a result, Large sections of cable bespoke design had to be developed with Bauder to overcome these challenging site details without the need to decant the retail tenants below. trays and handrails had to be lifted in situ so the roof works could be completed without compromising electrical or mechanical install.By working closely with the centre, a method of work was developed which fulfilled these criteria in terms of waterproofing, health and safety and business protection of the shopping centre. System installedBauderflex bituminous waterproofing system1 BauderFLEX K4EA torch applied SBS elastomeric bitumen capping sheet, featuring spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture.2 BauderTEC Sprint DUOA self-adhesive elastomeric bitumen underlayer with DUO lap technology. This product has a glass fleece reinforcement feature for stability and strength.3 BauderPIR FA-TEFlatboard insulation boards containing rigid polyisocyanurate (PIR).4 BauderTHERM DS 1 DUOA self-adhesive SBS elastomeric bitumen air and vapour control layer (AVCL) with patented “DUO” lap technology to ensure thorough sealing of lap joints, even in lower temperatures.

This 4,000 square metre roof in Lichfield, completed by Projects UK Ltd, was in need of refurbishment and Liquasil's BBA Approved Metalseal 20 was specified for its 20 year guarantee against manufacturing defects. The roof was cleaned and the cut-edges were treated with our unique SWT corrosion primer before a single coat of Metalseal 20 was spray-applied to the roof to provide a protective and decorative finish leaving the roof sheets looking like new.To get in touch, call our team of Building Surveyors on 0121 709 5352.

In a stunning architectural statement, CUPA PIZARRAS R17 slate has been specified to meet the design challenges of a former Georgian windmill renovation at Fort Green, near Aldeburgh in Suffolk. The first project of its kind in the UK, the natural slate was individually cut and fixed through expert craftsmanship to accommodate the building’s exterior curve while also providing crucial protection from the harsh coastal environment. Originally, the windmill walls were going to be clad in cedar shingles however, contractor ELC Roofing recommended using the rectangular CUPA R17 slate from CUPA PIZARRAS as a more weather-resistant alternative. ELC Roofing Owner, Edward Carlo, explains: “The R17 is a natural, non-carbonated blue-black slate with non-rusting metallic particles and thin laminations. From our perspective, it’s a tried and tested product that we specify and install on a lot of our projects – especially in coastal situations like this.” The slates, which protect against the salt water and wind, have been fitted on both the windmill’s curved wall, its pitched roof and elsewhere adding design details to the property’s walls. He goes on to say: “Aesthetically, the ocean environment has inspired the material choice with the slate mirroring the scales of a fish. This gives the windmill a dramatic architectural style; one that also sympathetically ties into the slate roof of the neighbouring cottage, which we replaced with CUPA R17 the previous year. “As far as I am aware, nothing like this windmill has been done in the UK. It was a case of starting from scratch to devise the optimum installation method, which involved a lot of detailed calculations.” For the tower, which has a 15m circumference at the base tapering to 11m at the top, the team initially removed the thick render on the windmill wall, taking it back to the original brickwork. Next, to meet the challenge of the curve and tapering of the wall, 50mm counter battens were fitted to the tower’s brickwork. Then, multiple strips of ply were cut and glued together to create the curve. These panels were screwed to the counter battens to provide an anchor for the fixing system. The ply was also primed to protect the surface from water ingress and a breathable membrane applied to protect the brickwork. In terms of fixing the slates to the panels, Edward said: “For a more corrosion and wind-resistant solution, I decided on the French technique of a stainless steel hook fixing system to install the slate, as opposed to nails.” Ensuring the layout worked exactly with the curves, the slate was lasered from top to bottom to perk it out, which took five days to do. Horizontal tiling battens were also marked to ensure the slates were fixed at the right height. Every single slate was cut and fixed individually to accommodate the curve and ensure they aligned with the building’s inset windows as well as other architectural details - a very precise process that required expert levels of craftsmanship. Preventing the slates from getting smaller at height, the team designed-in a series of lead bands that go all around the building at each storey level. These sit underneath the windows to create a consistent appearance visually. The windmill’s domed copper roof existed already and the adjoining tower, which is horizontally clad in a white weatherboard, features a slated pitched roof. ELC Roofing has again used CUPA PIZARRAS spanish slates. In this instance, the roof curves to the back end with four leaded hips to one end and two to the other with a connecting lead ridge. This time the slates were fitted to 20 x 50mm battens with a layer of permeable membrane. This part of the roof also features a striking onion-shaped finial. Expertly crafted by ELC Roofing, the finial is produced out of a patchwork of small pieces of soft copper, topped off with a fish that acts as a weather vane and includes stunning marble eyes. To the other side of the clad tower, CUPA PIZARRAS slate has been used to create a vertical square panel detail to the front of the building and fixed using the hook system again. Commenting on this challenging project, Edward said: “Work on site started before the first Covid-19 lockdown so as well as the challenging weather conditions that a coastal location like this presents, the team also had to complete the work with government guidance and restrictions in place. Regardless, the client is overwhelmed with the end result and so are we.” To find out more about the CUPA PIZARRAS range of natural slate visit: https://www.cupapizarras.com/uk/natural-slate-roofing/

This 6,500m² metal roof at Axcess 10 Business Park, Walsall was soiled, delaminating and affected by spot corrosion in numerous areas, which would have eventually spread and perforated the sheets if a treatment was not applied.Bosworth Cladding Services Ltd ensured that the roof was cleaned and the peeling factory finish was removed with a 4000 psi pressure washer. The laps were ground back and primed as necessary.The whole roof area was then coated with Liquasil's single-coat BBA Certified Metalseal 20 system to provide a 20 year product guarantee upon completion.The completed installation left a metal roof on its way to failure looking brand new, with a protective silicone coating that will last 20 years.For more information, or to make an enquiry, contact Liquasil on 0121 709 5352.

This is a metal roof coating & liquid gutter lining project carried out at Oxford Brookes University. The roof was power washed and the gutters cleaned before application. The gutters were treated with Liquasil's rust primer to prevent further rusting, before the seamless, silicone Gutterseal system was applied. The roof was coated with a single coat of Metalseal 20 in Goosewing Grey.

This case study focuses on the successful implementation of Britmet's Structural Conversion System, BritFrame, and composite slate tile, Liteslate, installed by ART Contracts LTD in a residential flat roof renovation project near Llangollen. The existing roof had been plagued by ponding and water ingress, necessitating repeated repairs and replacements over 20 years. This case study explores the benefits, challenges, and outcomes of utilizing the Britframe and Liteslate, providing a long-lasting and aesthetically pleasing solution. Residential flat roofs are susceptible to issues such as ponding water, water ingress and yearly inspections, which can lead to recurrent maintenance and repair requirements. This case study showcases the utilisation of Britmet Lightweight Roofing's Britframe Structural Conversion System and Liteslate to overcome these challenges and deliver a durable, low-maintenance roofing solution. Britframe is a versatile and innovative solution designed to convert flat roofs into pitched roofs, providing improved water runoff and a new more aesthetically pleasing finish, and reduced risk of ponding water and improved thermal performance. This can be covered using a variety of different roofing materials, and Liteslate, a lightweight synthetic slate roofing slate, was specified due to its excellent weather resistance, durability, and aesthetically appealing finish. Llangollen is part of the UNESCO World Heritage Site along eleven miles of canal from Gledrid to the Horseshoe Falls and required a durable yet authentic roofing solution.The project involved the renovation of a residential flat roof that had undergone multiple repairs and replacements over 20 years due to ponding and water ingress, and constant maintenance. ART Contracts LTD was tasked with implementing and installing LiteSlate to resolve recurring issues.The Britframe System converted the existing flat roof into a pitched roof, enabling efficient water runoff and preventing ponding, thereby eliminating the risk of water ingress, and reducing the need for yearly inspections and constant maintenance to site, Britmet’s Liteslate offered excellent weather resistance and durability, reducing the need for frequent repairs and replacements while offering an attractive finish replicating the appearance of natural slate. Overall offering the advantages of lightweight construction and ease of installation.Conducting a thorough structural assessment of the existing flat roof to ensure compatibility and feasibility of the Britframe required careful analysis and engineering expertise. Coordinating the installation of the Britframe and Liteslate with existing roof features, such as skylights or ventilation systems, posed challenges in achieving a seamless integration.The implementation of Britframe has effectively addressed the issue of ponding, providing efficient water runoff and preventing water ingress into the residential property. The utilisation of Liteslate offered exceptional durability, weather resistance, and longevity, significantly reducing the need for future repairs and replacements, and thereby providing long-term cost savings. Liteslate also improved the overall aesthetic appeal of the residential property, replicating the natural beauty of slate roofing while offering the advantages of lightweight construction. The integration of the Britmet Lightweight Britframe System and Liteslate successfully addressed the challenges the building was facing. The project resulted in improved water runoff, enhanced durability, a more aesthetically pleasing roofing solution, along with a new 60+ year life expectancy. This case study emphasizes the importance of selecting innovative and reliable roofing systems to overcome recurring roofing issues and deliver long-lasting and visually appealing outcomes.