"shower head"

The Project – Global HQ.This new build was a joint project between Leicester County Council and Loughborough University Science Enterprise Park (LUSEP). Together they delivered this stunning building which is to be solely occupied by The Access Group as their Global Head Quarters.Bathgate Flooring were engaged to manufacture, supply and install PSA grade BGM600 steel encapsulated panels throughout to provide the Access Group with Category A finish.Now completed – it will be home to more than a third of the global workforce for this leading technology company.Products UsedThe panels were specified to PSA Standards. The BGM600 Steel Encapsulated panel is medium grade PSA panel which suits most applications. This was used extensively in the installation.Testimonial“It was handed over to a very happy client and client team with some great feedback too. They think the building is great and are very pleased not only with the end product quality, but with the overall approach as a whole from start to finish– well done team LUSEP past and present, great work!  On behalf of the Wates Site Management team, I would like to thank you all for your proactive approach through all the difficulties that the past year has given to us all, you should all be immensely proud of the quality and passion that your workforce put into the project.Mike Martin – Site Manager,Wates Construction Midlands.Architect: Perfect CircleOwner: Leicester County CouncilContractor: Wates ConstructionLocation: LoughboroughSystem Size: 5664 sq. m.Completion: December 2020

Trent is a village and civil parish in northwest Dorset, in the beautiful Yeo Valley. The Trent Conservation Area was designated in February 1970. Many of its structures are listed due to their historical and architectural significance, including Medieval and Tudor buildings.  From 1835 to 1875, Reverend Turner and his wife occupied the village rectory. Together, they built a great number of the buildings that are still in the village today, including the Alms Houses. In 1862, the Turners constructed the National School which was to be for girls and infants. Throughout the years, the National School has seen many changes, including the introduction of boys and the expansion of the buildings. Unsurprisingly, the original metal windows at the school were not fit for purpose and the time came to replace them. This required sensitivity, as it was imperative the new windows looked similar to the originals. The Clement Brooking range was specified because the slim, strong frames could replicate the wonderful shaped heads of the existing windows and they could be fixed directly to stone. The 16mm krypton filled units offer the much-improved thermal performance required and, like all Clement windows, the frames could be fitted with restrictors, essential for safety.Ros Baker, the Deputy Headteacher said: “We are so pleased with the finished result! The transformation the windows have made to our school and local area is fantastic. Many local residents have also commented positively on the ‘new look’ windows. They have been sympathetically upgraded, in keeping with the original school building, and have had a positive impact on our school environment. Furthermore, there was no impact on the staff or the children during the refurbishment.”

The first thoughts about safety at work are always about physical injury prevention as well as inhaling fumes, hazardous substances, etc. However, Occupational Noise, which is the amount of acoustic energy received by an employee of a company, can cause permanent damage if it is continuous.In the UK, The Control of Noise at Work Regulations 2005, came into effect for all industries from April 2008, which is quite late when you consider that the harm hearing loss can cause. Harm such as Tinnitus, which is the perception of noise in the ear or head, caused by a problem with the inner ear.The sustaining of high noise levels can also mask warning signals, prevent concentration and vital communication.Most authorities around the world have agreed that noise becomes dangerous when it’s higher than 85 decibels during a typical 8-hour work shift. However, noises under 85 decibels can also cause issues with the general public who are in and around the working environment.An example below shows the different examples of noise levels in decibels – the definition of noise is sound that is unpleasant or causes disturbance.ReductionIf a noise can’t be reduced by engineering the equipment, then acoustic quieting is required. This is the process of dampening vibrations from machinery and systems such as flue systems.With the increasing demand for noise attenuation, the demand for noise reduction from flues and chimneys in marine and industrial situations mean that many companies have developed their own silencer programmes. These tend to be combined with flue systems to have a product range which is reducing sound at the design stage

Our MG200, recently installed in this contemporary office setting, delivers the desired room dividing solution while maintaining the aesthetic and brightness of the interior space.The ModernGlide MG200 panels can have a whiteboard wipeable and magnetic finish if required.Manufactured panels have a different level of acoustic reduction, but all of them provide the kind of flexibility needed to work perfectly within any office or commercial environment following a professional installation from ModernGlide.Because there is no need for a structural head support, this makes the MG200 series perfect for smaller openings. The versatility of our sliding folding wall partitions continue through the format of slimline stacking. This means that when the wall is not in use, it will take up minimal space in your environment.Additionally, the MG200 sliding partition series comes standard with a pass door panel which allows movement from side-to-side with seamless ease. We are able to offer a complete solution for all of your acoustic sliding partition needs.A continuous acoustic wall partitions system, it is perfect for a quick and easy set-up process and is our most popular budget solution for acoustic partitions that move.MG200 Wall Partitions Key FactsAcoustic reduction from 37dB to 49dBFloor-supportingPanel widths 450mm to 900mmHeight up to 4,000mmPass door as standardCentre-folding or end-folding stacking optionsPanel finishes include melamine, laminate, veneer and white boardIntegral glazing options30 minute fire rating option

Our double point movable walls allow the panels to stack away in a concealed recessed pocket to give a clear room and flexible spaces. The chosen finish was foamed backed 12mm stretched fabric Kvadrat. Colour name: Remix 3 123 both sides (flame retardancy) with concealed edge profiles, therefore giving the finest attention to detail. Structure opening was 4.5m wide and 2.7m high and consisted of 3 standard panels and 1 telescopic closure panel. The chosen acoustic sound reduction was our 50dB acoustic laboratory construction. As shown in our key facts and specifications above, there are many benefits that come with having movable walls in your environment. The made-to-measure panels of these operable walls work through an internal, retractable mechanism and move quietly and quickly along the head track. In their closed position, the MG100 walls are extremely secure and rigid. An element of flexibility is suddenly added to your space. And therefore the environment can quickly be manipulated to cater for any of your flexible space needs. Whether that be for meetings or a little bit of privacy. Contact Us for movable walls If you are looking to have movable walls installed in your work environment, please get in touch. Call one of our helpful and accommodating staff members on 01932 918 338. Or you can email us at sales@modernglide.co.uk. Alternatively, you can fill in our online enquiry form and we will reply as soon as we can.

Walsall College is the largest provider of qualifications for 14-to 19-year-olds in the West Midlands Borough of Walsall. In addition, it also provides education and training for adults, which is delivered both at the college campuses and on-site at workplaces and community centres. In total, more than 11,000 people study vocational technical qualifications, apprenticeships and higher education programmes with the college each year.Its main Wisemore Campus was built in 2009 following a multi-million-pound investment programme designed to provide a vibrant, lively environment that inspires and motivates students. The state-of-the-art facility includes bespoke areas for studying business, creative arts, computing, health, public services and automotive.As is the nature of modern building design, the Wisemore Campus features many hard interior surfaces such as plastered walls, glazed partitions, large windows and carpet-tiled floors. Despite being integral to creating a visually appealing, energy-efficient, safe, secure and comfortable learning environment.Hush Acoustics were invited to carry out a site survey in these relatively poor acoustic environments by Lee Bate, Head of Operational Services. He sought to find an effective response to a large number of complaints from college users in relation to noise in these areas of the building, chiefly as a result of sound reverberation, echo and ambient noise. These issues are known to affect the concentration, focus and engagement of students and staff in schools, colleges and universities, so Walsall College were keen to take the necessary action.The learning pods are used for online training, enabling students to participate and collaborate in Zoom and Teams calls or simply access a quiet area to work. Due to the construction of these rooms, there was a significant acoustic issue that could only be addressed by the introduction of a Class A sound absorber. These would prevent noise reflecting back into the room, which was the cause of the issue.The boardroom presented similar issues. It also features many hard reflective surfaces which were causing it to be very echoey, especially during conference calls and training sessions. To reduce the issue here, a number of Class A absorbers would also need to be installed.Step one was for Hush Acoustics to conduct a site survey. This allowed information to be gathered in order to carry out a series of reverberation calculations with a view to determining how sound absorbers could be used in the affected spaces to control and reduce reverberation and echo.The solution came with Hush Absorber 50 panels installed to the ceilings and walls. These Class A absorber panels utilise a specially formulated 50mm thick acoustic foam, hand finished with interior fabric that is applied to the face, edges and back return. They are designed to fit on any alignment and angle including slopes and ceiling in both portrait and landscape, with a choice of stylish and visually pleasing designs available in sizes, colours and finishes to suit any internal environment.Hush Absorber 50 panels have been highly effective in controlling the problem noise within the areas, dampening the sound issue with a level of absorption material that complies with the design guidance of BB93.The transformation of the learning pods and boardroom has been a great success according to Walsall College’s Head of Operations for the campus, Lee Bate. He said:“We are delighted with the difference the Hush Absorber 50 panels make and the service from Hush. We are extremely happy with how the areas are instantly more comfortable to work from and the panels look good in the spaces they have been installed.”

DUCO contributes with sun protection to the £78m project for The University of Manchester. The architectural sun control DucoSun Ellips 200 mm, supplied by Contrasol, was chosen for the Fallowfield campus. The solar shading is so much more than decoration.About the Fallowfield CampusThe Fallowfield is a student accommodation with 8 multi-storey blocks including a Warden’s flat and Energy Centre, amenity hub, landscaping and external works. Each residence will have 10 bedrooms per floor with ensuite bathroom pods and a shared kitchen. 1,122 student rooms are spread over the blocks with a combined floor area of 32,020m2. The Fallowfield Campus is the main residential campus of the University of Manchester. It’s a vibrant place where thousands of students live alongside residents – creating e a real sense of community. The mix of shops, cafes, bars and a frequent bus service to and from the city centre makes it an ideal location to live.Construction detailsThe blocks are constructed using pre-fabricated lightweight steel framing system panels which provide structure to the building when used along with composite concrete floors. External materials are predominantly buff brickwork with feature elevations picked out in charcoal fibre cement slate roofing and cladding. Study bedrooms incorporate built-in storage and furnishings and a high specification pre-fabricated GRP en-suite shower pod.  Solar shading is much more than decorationThe vertical solar shading system DucoSun Ellips was chosen for this project and supplied by Contrasol. This solar shading system, in which a blade with of 200 mm was chosen, guarantees not only maximum daylight, thanks to the optimal inclination angle and number of louvre blades. At the same time, DucoSun Ellips 200 ensures that the sun’s rays do not get a chance to heat up the Fallowfield interior spaces directly. The vertically installed solar shading system offers maximum privacy while maintaining the view outside.

PROJECT BACKGROUND:As pressure continues to build on the UK’s health service, Conquest Hospital's Emergency Department urgently needed to transform their current staff welfare area with additional space, achievable with a modular extension.The design included a canteen space, toilets, shower rooms, storage areas and lockers for NHS staff.REQUIREMENT:External developments included an accompanying ramp to overcome the exterior door threshold. The works needed to be achieved within a quick turnaround time and with minimal disruption to the daily running of the department.SITE SURVEY & DRAWINGS:We responded rapidly with a site survey soon after the initial enquiry.This project benefitted from the Lidar scanning technology used by our site surveyors.The machine scanned and plotted the heights and widths of the objects in view, including different floor levels.Our in-house designer then created a 3D visual of the ramp on top of the lidar model, ensuring to draw around any obstructions.The final 3D & 2D drawings were after given to the client with their quotation.END RESULT:Once the extension was near completion, the ramp was fitted in an L shape configuration within a day, minimizing disruption.FEATURES INCLUDED:Standard Handrail - this handrail system ensures users always have support to hold onto.Trombone Ends - these are added to the ends of a Rapid Ramp to prevent clothes catching.Mesh Platform - the self-draining mesh allows water to pass through rather than collect on the surface.Powder Coated Finish – rails are coated with thermosetting powder to provide a non-conductive, non-slip and scratch resistant surface.Telescopic Legs - these can be adjusted to accommodate different threshold heights.EXTRA FEATURES INCLUDED:Yellow Powdercoated Handrails – yellow is one of the easiest colours to see because of its ability to reflect light.Yellow Tread - this is a safety feature designed to help those with impaired vision identify the nose of the ramp and any level changes.

GEC ANDERSON OFFERS PRISTINE PERFORMANCE FOR UCS SPORTS PAVILIONThe fit out of a major new academic sports facility in North London has included the selection of custom built sinks, work-surfaces, shelving and other stainless steel units, manufactured and installed by sector specialist, GEC Anderson.The University College School Sports Pavilion in Hampstead has been designed by Marcus Beale Architects (MBA) with LIFE Build Solutions of High Wycombe filling the role of main contractor. The area was farmland until the 20th century. The use as playing fields dates from the 1920s.The 18th month project encompassed upgrades to the schools playing fields themselves and the erection of a two-storey structure with extensive changing room facilities, showers and toilets on the first floor. The comprehensive catering facilities include kitchens large enough to serve a dining area which can seat 200. Amongst the stainless steel fabrications designed and fashioned by GEC Andersons highly experienced workforce are a number of base units which combine with single section work-surfaces, sinks and splashbacks to create an easily cleaned, hygienic and ergonomic working environment.As well as the actual kitchen, GEC Anderson also supplied adjustable wall shelving and an L-shaped, three level base unit for a food storage and preparation area. In several places GEC Andersons site survey and subsequent liaison with the project team, which also included The Litmus Partnership Ltd. Catering Consultants, led to units being tailored to fit around structural columns and to accommodate different sized pieces of catering equipment.The stainless steel back bar, with associated fabrications and appliances were also supplied and installed by GEC Anderson.A spokesperson for MBA commented: In 2015 MBA won an invited competition to design a new sports pavilion on the site. Thorough analysis of the topography and the wider views led to a radical design for a pavilion in two parts, linked by a bridge angled westwards to align precisely with the Wembley Arch.

This new Multi-Brand Dealership is comprised of three showrooms for the three prestige automotive brands, Jaguar Land Rover, Aston Martin and McLaren and has been built in Hatfield Business Park, Shropshire by the award winning MCS Group. Each of the showrooms have been designed to allow freedom to explore the range of vehicles in a contemporary environment that is both luxurious and inviting. The Aston Martin and McLaren showrooms are also the first in the UK to showcase the newest corporate identities for the brands.The Jaguar Land Rover £15 million showroom is both light and spacious. It provides 18 vehicle display spaces and dedicated vehicle handover suites. There is also a drive-in service area, valet and preparation area. The Lusso 25 single glazed frameless glazed partition system was installed to create office spaces which allows uninterrupted visibility to the showroom. McLaren has a history of exceptional design and engineering, so it is not surprising that the design for the showroom includes a feature curved glazed partitioning system with curved glass sliding doors. Lusso rose to this challenge and bravely executed the complex design requirements. With this statement partitioning, the showroom becomes a be-fitting space for the stunning range of McLaren supercars, providing the customer with an unforgettable shopping experience. As a prestigious brand, Aston Martin is well-known around the world for being a car manufacturer that produces vehicles that turn heads. Their stylish new showroom has been designed to provide a luxurious backdrop for their stunning supercars.The development of the facility has created a bespoke environment with a dedicated customer specification lounge, private handover area and aftersales facilities.With the use of Lusso Glazed Partitioning System, the bespoke showroom has been given a sleek look which was required for this brand.Image - 8

Closomat is one of the leading installers of Changing Places toilets at airports, bus stations and railway stations. The company’s high-specification facilities meet British Standards, or above, enabling those with more complex needs to access the toilet and changing facilities when travelling and ensuring critical transport hubs meet their access and inclusion responsibilities. Under the government’s new Changing Places rules, from January 2021, it is now compulsory for any new transport hub in England, with capacity for 350 or more people, to include at least one Changing Places toilet. It is also a requirement for any transport hub of the same size undergoing major works to add a Changing Places. Closomat is experienced in providing design advice and installing facilities in new builds as well as retro-fitting facilities in existing buildings. Changing Places by Closomat can be found at the following transport hubs: Birmingham AirportBristol AirportEast Midlands AirportGatwick Airport, North TerminalInverness AirportLiverpool John Lennon AirportManchester Airport, T1, 2 and 3Accrington Bus StationHaymarket Bus StationStoke Bus StationPier Head Ferry Terminal, LiverpoolPaddington Station, LondonPort Talbot Railway StationSwansea Railway StationLondon Victoria, railway stationYork StationFacilities at Bristol Airport, Gatwick Airport, Port Talbot Railway Station and York Station include the added benefit of a Closomat wash and dry toilet, for those who may lack the ability to wipe themselves – allowing the facility to support a wider range of users. 

Topping out at 64m tall, Furnival Square hosts a brand new £35 million, 445 bedroom, purpose built student accommodation building on a prime site in the heart of Sheffield City Centre, adjacent to the Sheffield Hallam University campus.Built by McAleer & Rushe and aptly named the ‘The Gate’, the 22 storey building offers modern, quality student accommodation to support Sheffield’s thriving higher education sector. The building is designed to a BREEAM Very Good rating, developed and detailed by TODD Architects using the latest in Revit and BIM technologies.The specification called for the use of special bricks that gave depth and texture to the external skin. The 22 storey student accommodation tower also had to comply with all current Building Height Regulations for residential use and the construction team was faced with the considerable additional challenge of completing the build during global pandemic restrictions.Ash & Lacy provided over 4,000m2 of the fully-tested noncombustible, mechanically-fixed NaturAL-X brick cladding system, suitable for residential buildings above 18m tall. The system is also CWCT A1-rated and BBA certified (20/5773). Brick choice was SD102 from the Simplicity range.This lightweight system offers fast and simple installation and enabled a large amount of labor to be completed offsite, improving time efficiencies on site and facilitating just in time delivery.Over 50,000 cut and bonded corner bricks were manufactured at our in house facility, creating the deep castellating reveals that sweep across the building elevations. Soffit bricks were designed and manufactured to return underneath window heads, providing a realistic genuine brick aesthetic at key interfaces, achieving the original design intent.

Edinburgh based football club, Heart of Midlothian Football Club (Hearts FC) is a city institution and its Tynecastle stadium is classed as a ‘must-visit’ destination for any football-mad tourist. The recent multimillion pound redevelopment has seen it undergo a major transformation to ensure visitors have the most memorable and safe experience possible.It’s no surprise that football fans want refreshments while at the stadium, so the concourse houses a number of food and drink kiosks around the ground. Something that can be found at each and every kiosk is an Instanta InstaTap – and with 30 new machines purchased as part of the refurbishment programme, that takes the total up to 50 so far.“We originally started using Instanta about three years ago”, comments Graeme Pacitti, head of hospitality and catering operations, “after the competitor product we were using back then just kept breaking down. We looked around for a replacement and narrowed it down to two products, but went with Instanta because we liked the idea of being with a British manufacturer. It means if we do need to contact the team, it’s very quick and efficient.” Graeme is impressed with not only how the Instanta products work, but also how well they fit in to the kiosks. “We have both under-counter and counter-top water boilers, and they fit the compact space very well, but still deliver the high volumes we require on match days. They also look good and are extremely reliable.” Ben McCosh of Arumba Coffee, who supplies the stadium with its catering machines, adds: “The Instanta machines deliver what they promise. Match days are hectic, with a lot of pressure on the refreshment kiosks, but the water boilers don’t let the team down.”

Recognising their long-standing commitment to exceptional customer service and product excellence, partitioning experts Style has been named by Willmott Dixon as both the winner of their National Goods Supply Chain Award, as well as Goods Supply Chain Partner of the Year.  In addition, Style was recently awarded their 12th FIS Gold Contractors’ Award for their creative moveable wall installations at the new Londoner Hotel. “It is fantastic to receive such high acclaim from our partners,” said Julian Sargent, Style’s group managing director. “The awards reflect both the strength of our team and the high quality of the Dorma Hüppe and Skyfold moveable wall systems, for which we are sole UK distributors.”Style has worked with Willmott Dixon for many years, providing innovative moveable wall systems across a wide variety of sectors. “Style sometime go under the radar as they are so effective and efficient when they survey and install that our site teams just don’t have to worry about them,” comments Andy Pritchard, head of supply chain for Willmott Dixon, London and South. “However, their performance scores certainly don’t go unnoticed, with 81% achieved over five projects, they are leading the way. Great effort from all parts of their business and well-deserved winners.” At The Londoner Hotel Style worked with architect Woods Bagot, interior designer Yabu Pushelberg, and contractors Blue Sky Building & EE Smith Contracts, to deliver extensive flexible space in the main ballroom and meeting rooms. The FIS judging panel personally visited and assessed the installation, commenting that ‘the finished product is superbly fixed, of the highest quality and provides the flexibility that perfectly complements this hotel.’

Bath Western Riverside development is a multi-award-winning project for client Crest Nicholson Regeneration. The project has won multiple awards including the coveted NHBC ‘Pride in the Job’ award for H&S and the seal of excellence for quality.Systems in useExcel®ChallengesThe ‘curved’ bulk-heads, walls and interior finishes presented a special challenge to our on-site team, one that would be present over multiple floors and apartments.The system needed to be both robust and aesthetically pleasing, as the roofs are overlooked by residents and used as amenity spaces, and the colour had to be in keeping with the traditional Bath stone.In addition to this, the project featured many unique and complex terraces in terms of shape, threshold height, u-value requirements and access.SolutionsTo achieve both a level threshold and a good thermal performance, we designed a unique tapered insulation scheme for the terraces, utilising our Excel system, reinforced bitumen waterproofing membrane, in combination with our high performance and cost effective Hytherm VIP (Vacuum Packed Insulation) insulation scheme.To meet the aesthetics guidelines dictated by the local planning authority, the capsheet membrane was specified with a white granular finish, which provided the unique look the authorities were looking for.To ensure the terraces were installed correctly and in accordance with Axter requirements, we worked in close partnership with the development construction team. In conjunction with Avonside, a ‘traffic light’ system was introduced to ensure that each individual terrace had been checked by our Quality Assurance team, that it had been independently integrity tested and that it was installed in accordance with the architect’s details, upon which the guarantees were issued and the finishes thereafter installed.

Bellway, one of the UK’s leading housebuilders, is presently incorporating Hedgehog Highways into all of their new residential housing developments. The Hedgehog Highway by Timloc, part of Alumasc plc, frames fence holes designed to connect gardens, enabling hedgehogs to roam freely and forage for food and shelter. Hedgehogs are classified as vulnerable to extinction in the UK, primarily due to habitat loss and an increase in road-related incidents. A hedgehog can travel up to 2km and consume as many as 100 invertebrates in a single night, so facilitating hedgehogs’ access to green spaces is of critical importance. Bellway have already installed Hedgehog Highways in over 15 sites across the UK. “‘Better with Bellway’ is our new sustainable approach to business practice, aimed at putting people and the planet first. Biodiversity is one of our priority areas with the aim of protecting and preserving nature. As part of our work in this area, we will be installing Timloc’s Hedgehog Highways in customers’ gardens which will allow these animals to roam across our developments.” Stephen Weldon, Head of Sustainability at Bellway. With every purchase of a Hedgehog Highway, a donation is made to hedgehog charities to help them continue their vital work in rescuing, rehabilitating and releasing wild hedgehogs. Timloc have already donated over £2,500 to hedgehog organisations across the UK. To learn more about Hedgehog Highway by Timloc visit: www.timloc.co.uk For further information on Bellway go to www.bellway.co.uk Photo: Fabian Abalintoaie, Assistant Site Manager for Bellway, at the Ashberry Kensington Vale site in Howden, East Riding of Yorkshire. Download the Bellway and Hedgehog Highway case study here.

OverviewMechanical Smoke ventilation system designed and installed by Dyers Environmental Controls Ltd at Droylsden Marina.Project BackgroundThe Wharf, set alongside Droylsden Marina offers a collection of modern 1, 2 and 3 bedroom apartments which required a mechanical smoke ventilation system. Dyer Environmental Controls Ltd supplied and installed a mechanical smoke ventilation solution in a Watkin Jones Homes development. The fully automatic EN certified system allows safe escape for residents and clear access for firefighters.Project SolutionDyer Environmental Controls Ltd supplied and installed a mechanical smoke ventilation solution in a Watkin Jones Homes development. The apartment block has 6 levels connected by a central staircase. Dyers installed EN certified dampers to each floor along with local smoke detection. The fans were placed within the smoke shaft with a Powrmatic N-SHEV Roof Opensky louvred ventilator situated above them, providing weather protection. A control panel operates the duty and standby fans. Two AOV smoke dome vents are in place to provide smoke clearance, one located on level 6 and the other on the central staircase.Project ResultThe Powrmatic open sky louvre is situated above the smoke extract fans, providing weather protection. If smoke is detected in the building the system will open the corridor AOV, smoke shaft damper, head of stair vent and open sky louvre. The duty fan will run to extract any smoke located in the corridor. In the event of a power failure the standby fan will engage. Dyer’s fully automatic system allows safe escape for residents and clear access for firefighters.

Two types of Welsh Slate feature on the new roof of London’s Irish Embassy. The £2.5 million re-roof of the Grade II listed Irish Embassy in London, with more than 10,000 Penrhyn Heather Blue slates from Welsh Slate, has required its own exceptional levels of diplomacy. DarntonB3 Architecture had multiple challenges to factor in when it came to specifying the replacement slates, including the City of Westminster’s planning department, which was keen to see as many of the existing slates re-used as possible and required convincing to embrace the “new” metric sizes. Then there were landlords Grosvenor Estates, leaseholders the Department of Foreign Affairs and Trade, and Historic England, not to mention the site being opposite Buckingham Palace, on a “Red route” with diplomatic bays nearby, and between two of the most important Conservation Areas of Belgravia. Work began on the landlocked Grosvenor Place site in March 2018, a year after DarntonB3, who are specialist conservation architects, were appointed to oversee the project, and has just completed (January 2019). Two types of Welsh slates have been used on the former terraced town mansion with decorative metal roof crest that was designed by architect Thomas Cundy, who was surveyor to the Grosvenor Estate at the time, and built in 1868 in a French Renaissance style. Roofing contractor Mundy Roofing was involved at an early stage in the project and were ultimately appointed as principal contractor. Specialising in leadwork and natural slate roofing, they were pivotal to the project’s success. A total of 600m2 of County-grade 500mm x 300mm slates have been used on the numerous standard 30° to 35° pitched roofs while Capital-grade bespoke arrow-head slates of the same colour but sized at 400mm x 250mm were used around dormer windows on the 80° mansard roof elements that are reminiscent of Paris and feature lead secret gutter detailing around the perimeter. There is also some vertical slating to the rear elevation.  The old 5mm to 7mm thick slates had been on the roof since it was first built 150 years ago. The rectangular ones had been slightly longer and narrower, at 510mm x 255mm, while the arrow-head slates had been smaller all round, at 350mm x 200mm.  But a roof survey showed they were not laid to the correct bond or headlaps and fixing points were far from ideal and non-existent in places (the headlaps between 0 and 50mm), leading to the hardened sarking underneath becoming sodden in places. In fact, most of the roof had been repaired over the years with different types of slates using temporary lead tags or painted with a bitumen solution in an attempt to prolong its life. DarntonB3 argued that if the roof was re-installed as existing, its appearance would alter as they would have no option but to lay the slates at the correct headlap which would create additional courses. In addition, using the slightly larger arrow-head slates for the mansard roof would enable them to form a more robust detail at the abutments to the dormers and party wall.  Home to the Irish Embassy for the past 70 years, the building comprises office and entertainment space. The traditional timber truss roof featured timber sarking boards with penny gaps, a form of construction usually found in Scotland. The slates were then fixed with copper nails directly to the boarding without any timber battens. Once city planners had agreed to 100% replacement of the Welsh slates, at the new metric sizes (a process that took a year), the addition of timber counter battens, to improve ventilation of the roof and prolong the life of the new slates, was also proposed by the Architects. Mundy Roofing produced sample comparison mock-ups to demonstrate to the conservation officer this change would not be detrimental to the building’s character. As it is, the interface details where slates have been lifted has not altered the character of the building and the introduction of battens would not be known by the general observer.  DarntonB3 senior associate Matthew Jones, who was project manager and lead architect throughout, said: “Westminster City Council are regarded as one of the leading conservation-led councils in the UK, with some of the highest standards and criteria to meet, and dialogue with the conservation officer was detailed and robust. The need for wholesale replacement of the existing slate due to them being at the end of their life was a delicate decision and sufficient evidence of this necessity was proven. The replacement of the slates with metric sizes was also an extensively discussed item but the principal contractor and Welsh Slate worked with us to develop the narrative.” Keith Hamilton, an architect accredited in building conservation, acting for DarntonB3 alongside Matthew was reasonably sure Welsh slates had been used previously but was keen to ensure the correct thickness and grading were eventually used throughout the renewal process.  He said “We have specified Welsh Slate on numerous other projects and their reputation for the highest quality precedes them. We were able to argue the merits of increased ventilation behind the slates using cross battening in lieu of direct nailing to the existing sarking board, which in the majority of areas had survived over 150 years’ performance. “The risk of lack of ventilation on the lower roof pitches behind the slates was particularly relevant at the eaves and head. We had previously considered introducing slate vents and felt underlay to augment any need for ventilation but the existence of the ‘penny gaps’ in the sarking boards encouraged us, to believe that this was not required.  “This was another point of continued discussion with the conservation officer who was against an underlay in this instance. The timber sarking was found to be in remarkable condition considering the lack of existing underlay and the direct fix of the slates, highlighting the quality of the original slates. Hence, there is no secondary layer apart from the slating itself and we trust the quality of the new Welsh slate will replicate the existing quality and last another 100 years.” Due to tight access on the roof, they were also able to widen the lead gutters and set back the lower courses of slates to avoid getting them broken. All the new Penrhyn slates were holed and traditionally fixed with 38mm copper nails as opposed to clipped or other methods. The standard-size slates were able to cope with the wide variation of roof pitches and new rooflights encountered by varying the lap and gauge slightly. In virtually every case, the slate junctions are with lead or copper flashings and as it was appreciated there is some risk of staining, all lead was treated with patination oil. Using new treated timber battens for fixing the new slates proved a great success as direct fixing into the old hardened sarking boarding would have been a major problem and time consuming.  Matthew said the support they had received from Welsh Slate had been “fantastic” and included a site visit to match the type of slate, a letter explaining the need to change from imperial to metric sizing, technical drawings of the arrow-head slates, technical information on the end life of slates and their unsuitability for re-use, on-time deliveries with little if no wastage, and recommending experienced slating contractors. Mundy Roofing were on site for a total of 10 months. Work included the rebuilding of three chimney stacks, involving 30 tonnes of stone and brickwork, and restoration of traditionally-forged wrought ironwork to the pavilion roof crest, all underneath a temporary roof. Russell Mundy said: “This project was extremely challenging due to it being a working embassy but Welsh Slate were excellent with their support in achieving planning consent and the product has received widespread praise from the client.” Matthew said: “Due to the extremely difficult access to this roof, we were conscious to use a slate that will require little maintenance (if any) and satisfy appearance for an extended period of time. Welsh Slate were able to provide technical studies comparing different types of slate and their longevity. This enabled the landlord, Grosvenor Estates, that the new roof should outlast the previous roof and match it entirely with other buildings nearby. Welsh Slate’s evidence on the existing slates being at the end of their useful life, and the lifecycle information of the new slates, helped give the conservation officer comfort that the right approach was being taken for the building.” Keith added: “Essentially, Welsh Slate ensured we got the right slate, quality, consistency and sizes for the varying roof pitches and conditions. There have been no problems with mixing batches or colour variations which can occur. They also met the stringent programme requirements, reducing risks of delay from the main contractor. To our knowledge, there have been no rejects on quality of slates. “The final result is the new slating looks exactly like it was envisaged in 1868, except with the knowledge it is better-fixed and easier to reach for maintenance, with a discreet fall arrest system fitted. The client is extremely happy with the quality of the final works.” Andrea Fox, senior architect with the property management unit of the Department of Foreign Affairs and Trade, said: “The team have provided us with an exceptional and beautiful project that we know will stand the test of time and one we are extremely proud to have commissioned.” “I want to thank the Welsh Slate team for the support they provided during our project and especially in relation to protracted issues relating to the listed building consent approval.” 

ESSENZA HOME opts for a sustainable green façadeInterior and lifestyle brand ESSENZA HOME has moved into a new, completely renovated office in Bunnik in 2021. The new office is entirely sustainability-oriented. The Mobilane green façade at Essenza Home contributes to the company’s sustainability vision and provides a warm welcome for its retailers, customers, and staff. Family business ESSENZA HOME has been designing, producing, and distributing home & living products to suit various interior styles for 60 years. In 2021, the company moved to a new office in Bunnik. The building of no less than 2500 m2 is located directly on the A12 motorway. The new premises was built with an eye to the future and aligned with their sustainability vision. Therefore, the sustainable green Mobilane façade was a logical choice.Installation of the green façadeThe installation of the green walls was quick and easy. The green walls, with a total surface area of over 200 square meters, were placed against the stone and wooden façade by means of Magnelis steel omega profiles. The design incorporated the window and door sections and the water and electricity pipes.The almost 10,000 plants are installed in modular cassettes and pixels attached to the profiles. All of the cassettes, pixels, and covers are made of a fire-retardant EPP (B-s2, d0). This material is light, UV-resistant, air-permeable (for good root growth), and fully recyclable. An automated irrigation system provides the MobiPanel green walls with water and nutrients.Plant selection for the green façadeThe plants in the green facades were selected according to various factors. The orientation of the façade, the different flowering seasons, plants that stimulate biodiversity, and, finally, aesthetics were all considered. For example, Bregenis ‘Bressingham White’ is a beautiful spring bloomer with elegant white flowers that bloom from April onwards. The Vinca minor is a strong evergreen covering plant. It also flowers very early in spring. Vinca minor can be used on facades in both sunny and shady spots. The Vinca will produce more flowers in the sun than in the shade. Geranium Rozanne is a carrier plant for wild bees. Many species of wild bees, as well as butterflies and bumblebees, find their nectar here.Advantages of the green façadeThe green wall on the two outer walls is a real eye-catcher. Floor Smits, Head of Brands and second generation in the family business: “As a family business, we find it important to focus on the long term. During the renovation, we, therefore, invested heavily in sustainable solutions. When we were introduced to the possibility of a vertical garden for the façade, we were immediately enthusiastic. The green wall has many advantages, such as purifying the air, increasing biodiversity, and providing a nice haven for bees and other insects. Finally, we want to make a statement and show that we are committed to a sustainable world.” In addition to the office, there is also a b2b showroom and a brand store will be opened for consumers this year.Increased biodiversityRosalie Smits, Head of Channels and also the second generation of the family business, indicates that biodiversity is an important spearhead for the organization.The green façade attracts many insects, thus stimulating biodiversity in the area. As described earlier, the flowers of Geranium Rozanne, among others, provide nectar for many insects such as the wild bee and butterflies. Wild bees and butterflies are an important link in our food chain. They provide 60% of the pollination of our fruit and vegetables.The facades also attract various birds and other insects and serve both as food and as nesting and hiding places. In the cassettes between the plants, birds can nest safely. The first bird’s nest in the green façade at Essenza Home was found just a few weeks after installation.Client: ESSENZA HOMEArchitect: BK PuntConstruction period: 2021Installation: MobiCare

BackgroundThackley Primary School in Bradford is a well-established suburban school providing education for children aged 3-11. The school’s positive ethos seeks to provide a happy and active environment for learning, with teachers and staff dedicated to working hard to secure the highest educational standards for their pupils. With more than 450 pupils, the building can become extremely busy during school hours, both in classrooms and communal areas. That was presenting some challenges in terms of acoustics in certain areas of the school, particularly in its multi-use hall which is used for performances, PE lessons and dining.ProblemThackley Primary School’s multi-use hall is a large, open plan room which, like many internal environments of this type, features extensive areas of hard, reflective surfaces. When the room was in use, particularly when occupied by a large number of pupils and staff, excessive reverberation and echo was making it an unpleasant acoustic environment.Head of the School, Annette Patterson, sought to find a solution to these issues and approached Sound Reduction Systems (SRS) given the company’s experience in resolving these types of acoustic problems in schools. At the initial enquiry stage, Annette provided details about the school hall, including dimensions and photographs, from which the SRS technical department was able to model the space using their acoustic software. This enabled the team to propose a provisional solution with a specification and provide a quote. Once the proposed solution was agreed in principle, an acoustics specialist from SRS visited the school to take detailed measurements and discuss the various options available to arrive at a detailed specification.SolutionImmediately on receipt of Annette’s request for help addressing this acoustic issue, the SRS team confirmed reverberation was indeed excessive and reducing it would make a huge difference. SRS Director, Alex Docherty, commented:“As soon as I was shown into the hall, it was clear that the acoustic environment was not ideal – the long reverberation time made it difficult to hold a simple conversation between a few people comfortably, let alone when the hall was full of children. It was clear that a treatment using one of our Class A rated Sonata products was required to solve the issue.”Prior to any improvements, the estimated mid-frequency reverberation time was recorded at (Tmf) 3.57s. This level is considered excessive for a room of this nature. SRS calculated that 75sqm of their decorative Sonata panel absorbers would be required to solve the problem, bringing the reverberation time down to (Tmf) 1.13s.SRS provided the school with a layout design detailing where the panels would be installed within the hall. The school chose a combination of Suspended Sonata Vario panels and bonded Sonata Aurio panels and SRS were able to despatch their installation team within 2 weeks to fit the absorbers.Client feedback“I just wanted to say a huge thank you for the acoustic panels we had fitted. The whole process was great - from making initial contact with you, site survey, and fitting. You were always so helpful and knowledgeable when I contacted you. The wonderful man who came to fit the panels was just lovely! Really professional, friendly and had a high standard and a high quality of fitting.“The impact of the panels has been simply fantastic! What a difference!!! Lunchtimes are now completely different, assemblies are better and PE lessons are calmer. I have been recommending your company to everyone and playing them my ‘before and after’ videos that I made! Thank you again.”Head of Thackley Primary School, Annette Patterson.Products usedSuspended Sonata Vario panels Sonata Aurio panels

OBJECTIVEFileturn Ltd have supplied high quality interior fit-outs, refurbishments and construction services to a wide range of high profile clients for more than thirty years.When pairing with St Giles Hotel, they wanted to create stunning bathrooms that gave a luxurious feel but were totally unique.Nuance is a unique panelling range, it is 100% waterproof, trim free and is an ideal alternative to tiles as it is six times faster to install than tiles and is becoming the fastest growing product in today’s bathrooms.OBSERVATIONSThe unique selling points of Bushboard Nuance, means it is ideal for refurbishments as well as new installations where down time needs to be kept to an absolute minimum.Bushboard understands that a hotel room that is out of action can cause huge loss of earnings so they provide a 48 hour free of charge sample service along with panels that can be installed in a matter of hours.‘We have used similar products on other contracts but Nuance stood out from the rest. Very easy to install and work with.’The Bushboard Nuance range offers flexibility to shape the perfect bathroom. The postformed panels and the standard tongue and groove panels can be linked together with BB Complete adhesive and sealant ensuring you have a water tight joint, as well as a 15-year guarantee, giving you complete peace of mind.OUTCOMEFileturn specified Bushboard Nuance, Natural Greystone in Roche texture creating a modern and desirable space.‘Our client loves the result and is very happy with the appearance of the panelling in the showers.’Bushboard strive to develop materials, manufacturing process and installation techniques to make aspirational products more affordable.‘The Bushboard team were very helpful and we would definitely use the Nuance product again.’The specification team at Bushboard thrive on helping contractors and support projects from start to finish, ensuring they are nurtured to a mutually successful conclusion.For more information about the Bushboard products, request a RIBA CPD, download an NBS specification or order samples visit www.bushboard.co.uk or call 01933 232204.

Altro help transform spaces for mental wellbeingIssueThe old unit was originally a hospital ward which had been de-canted and empty since the COVID-19 pandemic. This included bedrooms, shower rooms, and kitchens in an old-fashioned community hospital building.ApproachThe building was stripped out and architects Hypostyle were enlisted to re-design all spaces as part of the major refurbishment programme. These spaces included a reception and waiting area, treatment office, corridors, and therapeutic rooms. The local Altro specification consultant provided guidance on suitable products when considering infection control, hygiene requirements, and NHS standards, and local children and young people were consulted on the colour scheme. A natural, calming atmosphere was required, one that reflected the hospital gardens and nearby woods, and Hypostyle provided the internal design specification.SolutionTo create a welcoming, biophilic theme, Altro Suprema in a natural tone and Altro Wood adhesive-free were specified for the reception, corridors, waiting area and treatment rooms.Helping to reduce noise transference, Altro Orchestra with 15dB impact sound reduction, was specified for the offices. For hygiene and safety, Altro Whiterock White and Altro Suprema were specified for the bathrooms.“It takes a lot of courage for young people to attend CAMHs – it can be an anxious time for them and for one of them to say ‘This place is wonderful, it has made me feel better already’ has confirmed that we have achieved our overall goal to create a welcoming, calm and comfortable environment. This is now the standard we will be aiming for in all future projects.”Altro Whiterock White hygienic wall cladding is a proven, high performance alternative to ceramic tiles.Altro Wood adhesive-free creates maximum impact with minimum downtime providing a safe, durable and decorative solution for busy spaces.Altro Suprema is a non-sparkle, low-gloss safety flooring with superior stain, abrasion and scratch resistance suitable for very heavy commercial use, foot and wheeled traffic.Altro Orchestra provides 15dB sound reduction and comfort underfoot in a wide choice of colours and five designs.

For the construction of a large villa of soft and natural colours in the countryside near Bologna, various Atlas Concorde floor and wall-tiles collections were used. Stone and wood effect porcelain stoneware tiles highlight the volumes and geometries in interior design by coordinating with outdoor floors that surround the home. Atlas Concorde floor and wall tiles offer interesting cues and ideas for home furnishing.The private dwelling, divided into two separate blocks, is at the heart of a lusciously green and bright garden rich in walkways made from the Trust stone effect outdoor floor collection. Indoor floors alternate the Axi wood effect porcelain stoneware and stone effect Advance collections. For the bathroom was used wall tiles, a cladding that combines expressive power with practicality, the Ewall collection, inspired by the look of spatula spread cement. Prestigious materials throughout the kitchen. The kitchen of the villa is enriched with style thanks to the Atlas Concorde porcelain stoneware and wall tiles. The tiles distinguish themselves for impeccable aesthetics and decorative character, guaranteeing numerous advantages, such as easy cleaning and maintenance. The low porosity makes the kitchen wall tiles resistant to humidity, stains, mildew and bacteria, and make them perfect for creating the kitchen backsplash, which needs to have other specific requirements, such as ease of cleaning, resistance to stain and resistance to heat. Bathroom tiles in a hose of great aesthetical impact. The bathroom wall tiles of the villa are covered in tiles from the Ewall collection by Atlas Concorde. Inspired to spatula-worked cement, the surface is enhanced by a delicate structuring and reflections of light, for a tremendous aesthetic and visual impact. Atlas Concorde ceramic tiles also guarantee easy cleaning and maintenance when used as a wall tile in showers, where they carefully highlight the elegance of every detail.Safe living outdoor. The surfaces immediately surrounding the villa created using the Trust porcelain stoneware collection give life to outdoor floors that combine the naturalness of stone with resistance to heavy footfall and adverse weather conditions, durability and safety. Outdoor floors in 2 cm thickness are also perfect as patio or terrazzo tiles, to experience the outdoor living of the house in total freedom.

Qbic Manchester, the fourth property in the Qbic portfolio, mixes striking design with admirable eco-credentials and affordability to deliver a truly eclectic destination hotel. Working with Qbic’s own interior designers and contractor, MY Construction, Style was specified to create flexible space in the hotel’s meeting rooms whilst also complementing the breath-takingly chic decor.Finished in a stunning steel blue, the two identical Dorma Hüppe Variflex glass moveable walls incorporate telescopic end panels, giving a truly aesthetic finish. With 52dB acoustic integrity and semi-automatic operation the walls can be quickly manoeuvred into place, dividing or opening out the meeting areas to meet the demands of the day.Combining a stylish crittall effect with a reeded manifestation added to the glass to match the room’s fixed glazing, these moveable partitioning walls not only add flexibility to the hotel’s space but also enhance the overall interior design.Qbic has reinvented the concept of affordable hotels, by focusing on what matters to its stylish, savvy, environmentally responsible guests. Located on the lively Deansgate strip, the Manchester hotel offers 261 pet-friendly rooms, boasts comfortable king-sized beds, has high-speed WiFi, plus water-efficient power showers and sustainable toiletries.“This hotel oozes the ‘wow’ factor,” said Andy Gibson, Style’s director for the North.“The moveable walls are effortless to manoeuvre, enabling hotel staff to create either three separate meeting rooms, one large and one small room, or open up the entire area."Semi-automatic operation ensures the acoustic seals are always applied to exactly the right pressure, offering high levels of privacy when meetings are in progress. The Qbic design team’s vision of a blue steel finish in this vibrant environment was truly inspiring and something we were proud to be able to deliver.”Style is the UK market leader in moveable, folding and partitioning walls and its glass range has expanded this year with a complete range of acoustic and non-acoustic solutions – each with manual, semi-automatic or fully automatic operation.

Inspired by traditional Belgravia garden squares, Chelsea Barracks is an exceptional development that will create an entirely new neighbourhood combining magnificent townhouses and spacious apartments with five acres of landscaped gardens, exclusive shops, fine-dining and state-of-the-art leisure facilities. It has been under construction since 2019 and it due to be completed in 2024.Chelsea Barracks represents a historic collaboration between world-renowned architects, best-in-class landscapers and the finest craftsmanship. It is the most coveted neighbourhood in London.It is a development of 440 residential luxury apartments, penthouses and townhouses. It cost £3bn to build and was the most sustainable developments in Europe in 2021, attaining LEED platinum certification for green building.The design and quality of finish in the properties is extremely high end and includes high spec finishes including natural stonework finished by Italian stone Artisans, bronzed ironwork balustrades inspired by the botanical prints of William Morris and elegantly crafted wooden floors and bespoke cabinetry.ECLISSE UK supplied 250 bespoke pocket door systems, including Classic singles and Classic doubles with accessories, to the project and they were predominately used in the bathrooms and living rooms. Classic singles were used in bathrooms to create more space where the arc of standard hinged doors would have otherwise encroached on the space. This allowed more space for larger shower enclosures and enhanced room layouts. Double pocket doors were used to create more space and enhanced layouts in the living rooms to allow furniture to be placed closer to the edges of the room to create more spacious layouts that feel bigger. Product: 250 bespoke Classic Pocket Door System with accessoriesLocation: Chelsea Bridge Road, London, SW1W 8RGDeveloper: Qatari Diar GroupArchitect: Masterplanners - Dixon Jones, Squire & Partners and landscape architect Kim WilkieDevelopment: Over 440 two to Seven bedroom luxury residences and townhousesCompletion: The development is being completed in phases with the final phase expected to be completed in 2024.Image Source: Savills

Altro solution rocks Rockville HospitalAltro Pisces, Altro Whiterock White, Altro Whiterock recessed shelfIssueRockville Hospital, part of the Eastern Connecticut Healthcare Network, boasts a strong behavioural health unit that provides support and specialized, sophisticated services for many areas of mental health, including additions, anxiety, depression and other counseling.The project had originally called for competitor products, but the Altro Regional Representative met with Jeff Lawton and Rockville Hospital housekeeping staff and presented Altro products, showing the proper cleaning regimen.ApproachJeff Lawton worked with the hospital, selecting Altro floors and walls to ensure a safe, easy and familiar bathing experience for residents at the unit. The hospital was impressed, and staff members continue to be happy with their installation.SolutionFor the bathrooms and other wet areas throughout the unit, award winning Altro Pisces was specified for the floors, accompanied by Altro Whiterock White hygienic wall sheets, preventing moisture and water ingress. With increasing efforts to combat healthcare acquired infections in hospitals around the country, impact-resistant and hygienic wall products are essential. With creating a safe environment for users a priority, Altro Whiterock recessed shelves were selected to offer a lip and ligature-free solution for holding toiletries.Altro Pisces achieves Class B to DIN 51097 for barefoot use, plus a Pendulum Test Value (PTV) of ≥50 (Slider 96). Altro Pisces offers 16 soft-look shades; the result is the soft appearance that you would want from domestic interiors, with the lifetime sustained slip resistance you expect from Altro.Combined with Altro Whiterock White hygienic wall sheets it pro vides an impervious and easy to clean solution for wet environments.The Altro Whiterock recessed shelf is a pre-fabricated unit, us ing proven Altro Whiterock hygienic walls sheet, providing a watertight, rust-proof shelf for shower toiletries which is tamper-resistant and free from potential ligature points, helping to keep users safe.