"sections including tapes"

With the new Elizabeth line set to deliver a 10% increase in rail capacity across central London, the project will provide a high frequency service that reduces journey times and creates new travel opportunities by linking 41 stations across 100 kilometres. As part of the landmark construction project, over 42 kilometres of new tunnels, 50 kilometres of new track and 10 new stations are being developed in conjunction with major upgrades to the existing infrastructure. Throughout the construction stages of the central section, which spans from Westbourne Park to Plumstead and Pudding Mill Lane, over 350 of Bilco UK’s innovative aluminium Ladder Up® Safety Posts have been specified by Crossrail’s systemwide contractor Alstom TSO Costain Joint Venture (ATC Systemwide) to provide safe and secure access. Weighing just seven kilograms due to the milled aluminium construction, the resilient Ladder Up® Safety Posts will provide engineers with unobstructed access to the walkways when conducting essential maintenance throughout the tunnels, once the line is operational. Once fully open, the Elizabeth line will provide an additional 1.5 million people with access to central London within 45 minutes, covering Reading and Heathrow in the West, right through to Shenfield and Abbey Wood in the East. The specification process, managed by Construction & Rail Contractors McNealy Brown, focused on the requirement for durable yet functional access solutions that would consistently provide a safe and direct step through onto the walkway, without impacting on the surrounding electrical services. The unique and high quality construction of the Ladder Up® Safety Post fulfilled each requirement of the brief. This includes features such as the innovative telescopic post, which mounts permanently to the top two rungs of any fixed ladder to provide a secure handhold that enables the user to enter or exit the opening in an upright and balanced position. Clive Burfoot, Contract Manager at McNealy Brown, said: "When we first began researching potential access solutions for the Crossrail project’s central section, it became clear quite quickly that the Bilco UK Ladder Up® Safety Post was the only product available on the UK market that would fulfil our extensive list of requirements." “The telescopic extension was one of the main benefits that secured its specification for this project, as it enables the Ladder Up® safety post to be both retracted and extended, a key function that wasn’t available with any other access solution.” Each ladder has been installed with two Ladder Up® Safety Posts, which are located on either side of the ladder to provide the direct step through onto the walkway for increased safety and efficiency. The installation process, which has been managed by ATC Systemwide, will provide secure access throughout all essential areas of the central section, including at either end of every station and at additional strategic locations. Vimesshen Ravindran, Senior Mechanical Engineer at ATC Systemwide, said: “The lightweight construction of the Ladder Up® Safety Posts ensured the installation process was quick and easy, resulting in no unforeseen issues on site. When the system retracts, the high quality spring-balance and convenient lever release provides a controlled means of lowering into its retracted position. This delivers enhanced ease of operation, ensuring long term suitability and usability for the engineers when undertaking future maintenance tasks. “The Ladder Up® Safety Posts will play an essential role in ensuring the central section of the Elizabeth line continues to run at the highest standard, so it was crucial we specified access solutions that would facilitate the continued maintenance of the line, safely and efficiently.” The telescopic tubular section automatically locks when fully extended, while the adjustable mounting hardware accommodates any ladder rung size or spacing. The corrosion resistant construction can also withstand the demanding environment of the London underground system, ensuring its successful operation for years to come. Darren Waters, Managing Director of Bilco UK, said: “We are extremely proud to have been involved in the UK’s high profile Crossrail infrastructure project and have worked closely with McNealy Brown and ATC Systemwide throughout every stage of the specification and installation stages. “This has ensured our unique Ladder Up® Safety Posts have fulfilled each individual requirement of the central section of the Elizabeth line, from security and ease of usability, right through to long term durability. We look forward to seeing the completion of the Crossrail project as our innovative access solutions play a vital role in ensuring its safe and successful operation.” Aiming to make travelling throughout the capital easier, quicker and less crowded for passengers, the Elizabeth line will not only reduce the strain on London’s transport network but transform the way passengers experience and interact with the city and its suburbs.

Project typeRefurbishmentContractorWilliam Bowley Projects LtdBrief descriptionRecently retired, the clients were looking to move from London to the bustling seaside town of Poole. They found a chalet bungalow at a desirable location right by Poole Park and only a short distance from Poole Harbour & Sandbanks beaches. However, due to it being previously rented out long term, it was in need of a lot of modernisation.The client’s desire was to create a large steam shower area in the master en-suite with plenty of space for them to relax, listen to music and unwind after a busy day.Due to the size and layout of the existing en-suite, and especially its low angled ceilings, careful planningwas required to provide the client with the desired, spacious steam shower without compromising too much on the floor space.RequirementsSteam shower area with sound & lightingThe clients wanted to create an area for absolute relaxation, a private wellness oasis, accessible only from their bedroom.Required components• watertight and steam-proof components with longevity• spacious seating area• practical storage• sound technology• lightingProducts usedBase products• wedi Vapor 85 building boards with pre-installed vapour barrier membrane (SD value of 92)• wedi Sanoasa Bellina seat element• wedi Sanoasa Bellina carrier element• wedi 610 adhesive & sealant• wedi Tools joint reinforcement tape, self adhesive• wedi 620 sealant• wedi Tools waterproof sealing tape• wedi Tools waterproof sealing corners• wedi Tools washers, stainless steelProducts usedIndividual products• 1600 x 950 x 50mm wedi Fundo Riolito shower element(1100mm channel on the long side and DN50 horizontal drainage)wedi solutionsDesigned & built by the installer• a practical and easy to maintain niche for storage(using the trimmings of Vapor 85 building boards)The required technology was integrated into the wedi elements by the installer, providing the clients with the perfect atmosphere to promote well-being.‘Compared with cement board/aqua panel, wedi is truly a superb system; easy to use and fit, lightweight and perfect for tiling over. I will definitely be using wedi for future bathroom installs’Nick Turner, Director at William Bowley Projects Ltd.

A bespoke timber side sliding sectional garage door by Rundum Meir has proved to be the perfect fit for a private collector of classic 1950s Humber cars.After moving into the period property around six years ago, the owner was keen to redevelop the unloved garage to create a space for housing his collection of mark IV B Humber Super Snipe cars. Having purchased and maintained four of these specific models over the past 15 years, he wanted to ensure the new garage would reflect the beauty of the vehicles as well as mirror the period architecture of his 1910-built home.The vehicles are now housed in a garage accessed via an automated timber side sliding sectional door, featuring glass apertures, designed, manufactured and installed by Rundum Meir UK. The six-section door spans 4m to provide easy access to the garage and painted in a high quality black finish to achieve a period look.The homeowner said: “We’re delighted with our new garage and thankful to Rundum Meir for the sliding doors which have made the dream a reality. When we started on the project we researched numerous garage door types, but we struggled to find one that was out of the ordinary, automated and available in the stable-door style we sought.“Danesch and the team at Rundum Meir were fantastic. Following an initial visit to our home, they helped us explore the options within our available budget and the door that they proposed was perfect. With the windows, it is great to be able to see our Super Snipes in all their glory with ease."The side sliding sectional door installed here demonstrates how Rundum Meir is able to develop a bespoke solution for most applications. All its doors are designed in the UK, hand crafted in Germany and assembled back in the UK prior to installation.

Client: Durham County Council Main Contractor/Manufacturer: Retro Bridge Specialist Contractor: St Astier Consulting Contractors Main Products Used: Emseal BEJS SystemThe Witton Park Road Bridge near Bishop Auckland crosses the River Wear at the same place as the historic Witton Park Railway Viaduct, but at different angles. The main central bridging structure was being replaced as the old structure had deteriorated and become structurally unsound. The new prefabricated replacement section of the bridge is a Retro Beam Bridge design, made from thermally galvanised steel for long term durability and is 64 metres long, with a single-lane road carriageway plus a cycle path. The new bridge section was installed in just 3 days through the Victorian brick arches of the Viaduct by Retro Bridge. Then the teams from Durham County Council and St. Astier Consulting Contractors were able to work on the bridge deck expansion joints at each end, to ensure that these had an equally durable, watertight seal. To do this quickly and efficiently, as well as ensuring the long-term durability of the exposed joints, they selected the Emseal BEJS System provided and supported by NCC (Movement Joint Systems). The Emseal BEJS System can handle harsh environmental conditions and has greater movement capability, better low temperature flexibility and higher temperature stability than other joint movement technologies. In a single installation, BEJS provided a watertight durable seal, with a joint movement capability over 100%, including 3-dimensional movement, plus it required no invasive mechanical anchoring as it is bonded in position.

GSS designed this superb lecture theatre incorporating our Topakustik 9/2M for the ceiling and wall. The fantastic finish was installed by Titan (Horbury Group) on behalf of Galliford Try installed the Topakustik product between the plaster board sections.

ASF were working with Elite Landscapes on a number of elements of the extensive renovation of the White City area of London. As part of this ASF were approached to manufacture and supply illuminated handrail to a number of stepped and ramped areas along the site. Lighting was specified to achieve lux levels of 15-20 at all points.ASF used site drawings to create our own layouts that were signed off by the manufacturer. These layout drawings included not only the handrails, but luminaire positioning, lighting diagrams and enclosure / cabling details that the site would need to have in order to install.ASF supplied the handrails as modular elements to meet 0.74kN loading, pre built up in our factory to sections as large as we could affordably deliver to reduce the need for site building as much as possible.Lighting was sent, bespoke manufactured for each handrail, as a plug and play set up, with all necessary drivers, in a kit form

Market Estate is situated next to Caledonian Park in the London Borough of Islington. It is named after the Metropolitan Cattle Market, opened by Prince Albert in 1855 as an alternative to Smithfield. A major redevelopment includes a mix of residential units. As part of this scheme, significant improvements were made to Caledonian Park: planting new trees and relaying paths.A Modena railing fence surrounds the formal landscaping and a children’s play area within the park and encloses an additional garden to the North.Over 450m of standard and radiused fencing was supplied with double-leaf and pedestrian gates. A pair of bespoke gates were designed and manufactured to hang within stone pillars with a section of Modena-XL, 3m high fencing, to either side. This forms an impressive entrance towards the Victorian Clock Tower, the clock is noted for being a prototype for Big Ben.Finish: hot-dip galvanised & polyester powder coat – Mica Grey

The BEMO N50 perforated profile was chosen to clad the plantroom at the Institute of Cancer Research. Thanks to BEMO's expertise in curving, the tight radius could be achieved as a smooth curve to ensure that the desired appearance was achieved without the need for facetted or crimped sections.

The refurbishment of the car park was one of the first steps in the regeneration of New Covent Garden Market; a project which is projected to take 10 years at a cost of £2 billion.Appropriately for a flower and fruit market, BDP designed a green wall facade. Lang+Fulton’s Stereo-3 panels were chosen to clad three elevations of the 7-storey car park, sections of which will become covered in ivy.The design incorporated an aluminium box section framework and feature panels as well as open spaces to create added interest. In total Lang+Fulton supplied 422 grating panels in various sizes up to 2510mm high to cover an area of 1296m2. The grating panels were framed at the top and bottom with bent over lugs for fixing to the aluminium uprights. 

Liquasil's BBA Approved Metalseal 20 roof coating and Gutterseal system were specified for use on the Airspace Trampoline Park in Wolverhampton. The whole roof was pressure washed and a historical cut-edge corrosion treatment was removed before application; the cut-edges were treated with our SWT Corrosion Primer, with additional reinforcement to the mid-laps through the installation of Liquasil's optional HP Butyl Tape.The whole roof was then coated with Metalseal 20 in Goosewing Grey at a filmweight of c. 300 microns to provide a protective, aesthetically pleasing finish.The gutters were cleaned out and dried before being primed with our SWT Corrosion Primer. Once touch-dry, the joints could then be sealed using our Non-Sag Sealer and a single coat of Liquasil One was applied to the entire gutter. Liquasil One can be immediately applied over the top of Non-Sag Sealer, meaning no time is wasted waiting for it to cure before the works can continue.The end result was a revitalised metal roof with a protective, water-resistant coating that is guaranteed for 20 years.

Technical representatives from F. Ball have provided flooring with a cost-effective alternative to completely removing and replacing a weakened screed as part of a flooring refurbishment at the Aberystwyth Arts Centre, part of Aberystwyth University. Upon removing old floorcoverings, flooring contractors were faced with an extremely rough screed with weak patches, possibly the result of poor installation or curing techniques, environmental factors or age, that was unsuitable for the application of subfloor preparation products and the installation of floorcoverings. Some weak sections were mechanically removed, leaving about 75mm thickness to be made up. A structural engineer confirmed that the concrete bases were, otherwise, structurally sound. New P5 chipboard was affixed to the wood subfloors with screws and glued at the joins. It is often necessary to completely remove and replace a weakened screed. However, F. Ball technical representatives called upon to conduct a site assessment were able to recommend a less costly and time-consuming solution to make the surface suitable to receive floorcoverings, including quickly raising the level of floors where sections had been mechanically prepared. Firstly, any remaining weak spots in the base would need to be removed by mechanical means along with any surface contaminants to create a clean, sound micro-textured finish. Any dust and debris should also be swept away. Moisture tests indicated subfloor relative humidity (RH) levels in the concrete subfloors were as high as 78%, meaning a moisture management solution would be required. Contractors therefore applied a single coat of Stopgap F77 solvent-free epoxy waterproof surface membrane over the entire area to obtain a continuous barrier against subfloor moisture. Flooring contractors then used Stopgap 600 Base deep section levelling compound to raise the level of floors where weak patches of screed had been removed.  It was also recommended that the chipboard over the raised access floors was checked to ensure that the surface was clean, secure and undamaged before applying a minimum thickness of 0.2mm of Stopgap Fill and Prime over the entire area.  The whole subfloor area was then capped with a layer of Stopgap 1200 Pro high performance levelling compound to create a perfectly smooth base for the receipt of new floorcoverings. The final phase of the refurbishment was to install Nora rubber sheet floorcoverings using Styccobond F48 PLUS. 

The brief of this project was to carry out a trial on a section of track (the Metropolitan Line) located close to Farringdon station to provide an elastic, permanent repair waterproofing solution which would not cause any detrimental effect to the structure nor the trains passing through it.

The completion of a stunning new Hilton hotel at Silverstone is another step nearer and leads the way featuring the superior high-performance Wraptite external airtightness barrier.The impressive new hotel, located trackside, overlooks the starting grid for the home of the iconic British Grand Prix. Facilities include 197 guest rooms, a rooftop terrace and the offer of race-day hospitality experiences.KKA Architecture designed the hotel, with Metclad Contracts appointed as the specialist envelope contractor for the project.Wraptite airtightness membrane from the A. Proctor Group, specialists in supplying high-performance products to protect buildings, was selected by Metclad to maximise airtightness and energy efficiency, perfectly balanced with the crucial requirements of vapour permeabilityWraptite self-adhesive breather membrane is applied externally, quickly and efficiently as part of the rainscreen system. Incorporating the Wraptite System helps ensure “as-designed” performance. Its inclusion narrows the gap between asdesigned and actual energy performance whilst reducing the likelihood of possible failures to meet required airtightness levels.Traditionally air barriers have been fitted internally. The internal installation of an air barrier necessitates accommodating building services such as electrical, lighting, heating and drainage systems, thereby increasing the gap between as designed and built. However, the Wraptite membrane fully bonds externally to virtually any substrate, requiring no additional mechanical attachment, seals or tapes to suppress air leakage around junctions or penetrations.The high vapour permeability of Wraptite allows the substrate beneath to dry quickly and moisture vapour to escape and reduces the likelihood of mould, mildew, condensation, timber distortion and metal corrosion.Wraptite is the only self-adhering vapour permeable air barrier certified by the BBA and combines the critical properties of vapour permeability and airtightness in one self-adhering membrane. Quite simply, providing a winning performance in advanced membrane technology for buildings.

Hospital Specifies TITAN Lite™ 120:60 From FIREFLY™An 18-month contract being carried out by a leading UK fire contractor has involved installing large quantities of the TITAN Lite™ 120:60, manufactured by TBA FIREFLY™, to create fire barriers above ceiling voids throughout many parts of the hospital.The hospital has 660 beds and provides medical and surgical care to a third of a million people with the building dating back to before the beginning of the Second World War. The refurbishment work, concluded at the end of November 2021, was being carried out by Plymouth based Ventro Ltd. whose operatives have had to work in many areas during the evenings and weekends in order to avoid disruption to the hospital’s everyday activities, including the treatment of patients.Following early appraisals of the fire protection requirements within the ageing property and taking into account the large quantities of different mechanical services to be accommodated into the upgrades, the hospital’s estates department decided to raise the specification for the work from 30 minutes integrity rating to a full two hours. The Site Agent for Ventro, John Roberts, commented: “As a specialist fire contractor working across the whole of the UK and beyond, we have employed FIREFLY™ products on many projects over the years and expect to continue doing so. In the early stages of this contract, which began on site in May 2020, it was thought APOLLO Lite™ 30 minutes would be appropriate, but the hospital then switched this to TITAN Lite™ 120:60. We have been installing the TITAN Lite™ in many parts of the hospital, including most recently in the ceiling voids over the kitchens. This has been done by fixing metal angles across the soffits and then using the special tape and staples to secure the fabric to it. Despite the large number of services making the number of penetrations to be deal with quite challenging, our teams find the FIREFLY™ relatively easy to install.”FIREFLY™ TITAN Lite™ 120:60 has been developed as a flexible fire barrier to provide compartmentation of larger concealed spaces within different types of buildings including factories, warehouses and railway stations.By offering 120 minutes integrity and 60 minutes insulation, TITAN Lite™ 120:60 exceeds the minimum requirements relating to Fire Barriers as detailed in the UK Building Regulations: Approved Document B (Fire Safety). Firefly is manufactured using specially treated woven glass fibre fabrics. 

These are the classic FalcoSail cycle shelters recently manufactured, supplied and installed by Falco for Scottish Premiership team - Kilmarnock Football Club.Falco installed two 6m FalcoSail cycle shelter bays complete with the popular Toaster cycle rack to accommodate 16 bikes per bay. Each bay is made up of a standard 3m starter section with 3m add-on section, complete in a traditional galvanised steel finish.In view of the iconic Rugby Park stadium, the first cycle shelter bay was installed outside the Chadwick stand - towards the north of the stadium, with the second installation adjacent to the main entrance - outside the Frank Beattie Stand, off Rugby Crescent.Kilmarnock FC is a Scottish professional football team founded in 1869 and based in the town of Kilmarnock, East Ayrshire.In addition to Kilmarnock, Falco has supplied many other professional football clubs with cycle parking infrastructure and street furniture including Manchester United, Manchester City, Tottenham Hotspur, Arsenal, Wolverhampton and Aston Villa football clubs. Like all Falco structures, the FalcoQuarter cycle shelter not only meets the EN1090 Construction Products Regulations but also comes hot dip galvanised to EN1461 as standard. All products can then be powder coated in any of the 192 RAL colours in our own production facility. The shelter is clad in robust polycarbonate providing a maximum flow of light.With the addition of a simple walkway cover and optional gates front and rear, the FalcoQuarter can easily be made into a very versatile storage compound. Again with up to 5m variants, it is possible to create enclosed, weather proof spaces of any size.There are a wide range of cycle parking systems which can be incorporated into the FalcoQuarter including traditional Sheffield Stands, Toast racks, A-11 racks, Ideal racks, Perfecto stands and FalcoCam cycle stands.In addition to a cycle shelter, the FalcoQuarter design can also be used as a smoking shelter, waiting shelter, wheelchair shelter or storage shelter.For more information about the scheme here at Kilmarnock FC or how Falco can assist your cycle parking scheme, please contact our helpful sales team on 01538 380080.

A busy recycling centre in Coedcae Industrial Estate, Pontyclun South Wales, suffered from a crippling fire that destroyed one-third of the building leaving the rest in severe disrepair from fire damage.Garland Technical Manager, Dale Thomas, was instructed by long-term partner Cushman Wakefield to assess the extent of the damage and secure the optimum waterproofing system to get the warehouse unit returned to its former glory as a hive of activity for the local area.Dale conducted a thorough condition survey and supplied a detailed written report to the client, highlighting the severity of the building damage and the poor condition of the existing roof sections and walls. Approximately 2,000 sqm were either damaged beyond repair or had fallen into a state of disrepair, meaning that a full refurbishment of all roof and wall sections was required before the optimum waterproofing system could be implemented.

Architect: Paul Murphy ArchitectsInstaller: TKS UK LtdProduct: Gustafs Linear Plank150m2 and 500 individual Walnut veneered planks were used inside the private hotel bedrooms and corridors at the RAF Club Squash Court Redevelopment in Piccadilly, London.Gustafs Linear Planks are a great compromise between the Gustafs Linear Rib and Panel systems for use in smaller installations with multiple small sections which do not lend themselves to the larger panel system. Planks use similar invisible fixing Capax profiles for quick and efficient installation and subtle closed butt joints across the plank area.The plank system at the RAF Club is made up of 100mm wide natural Walnut veneer wrapped planks installed to the feature wall sections in 12 hotel rooms as well as in the lift lobbies over 4 floors at the club in Piccadilly.

This elegant extension, designed by award-winning practice Chris Dyson Architects, not only significantly increases the footprint of the client’s North London home, but also delivers a uniquely versatile living space for use all year round. The pure scale and the innovative use of glazing for the extension as well as for the new top floor dormer cannot fail to impress, and yet the architectural language reflects the calm, understated style for which Chris Dyson Architects have become acclaimed. Bespoke rooflights, supplied by Glazing Vision, not only flood the ground floor with natural light, but they also help moderate the temperatures throughout the house.The client was seeking to refresh the property by adding an extension to the rear, which would enable the existing ground floor spaces to be connected through a single flowing space, creating a welcoming and flexible environment for hosting their growing family and for entertaining guests.The top floor bedrooms were accessed via a narrow hallway where a small dormer window provided minimal daylight and restricted views of the garden. Creating a living space on this floor where the family could relax and enjoy some downtime was also part of the client’s brief to Chris Dyson Architects.Glazed openings for harmonious integrationThe design for the extension was a solid and robust structure that would integrate harmoniously with the main body of the house and would serve as more than just a “sunroom”. The traditional proportions of the classic orangery have been achieved by Chris Dyson Architects through the use of precast stone columns and five glazed openings, which connect the new internal space with a raised external terrace leading to the rear garden.New internal glazed doors enable the formal dining room and the breakfast room/kitchen to be opened or closed to the main orangery space, providing flexible spatial and acoustic barriers without compromising the natural light entering the entire area.For entertaining and parties the space is ideal, allowing people to freely move between rooms and out onto the garden terrace.Maximising daylight, moderating room temperaturesThe insulated walls and the energy efficient double-glazing of the orangery would serve to keep the space warm in the winter months. In the summer opening the doors would help keep the space comfortable. To further regulate the internal temperature a full width rooflight from Glazing Vision was installed, equipped with sliding elements. Chris Dyson Architects chose Glazing Vision due to the high quality of their products and their ability to create beautiful bespoke solutions.The architects worked closely with Glazing Vision’s specialist CAD designers and technicians to design custom rooflights to meet the exacting requirements of the orangery roof as well as the new glazed dormer.Given the exceptional size of the extension roof, 3320mm x 10900mm, Glazing Vision’s factory precision-engineered a special Dual Sliding Over Fixed Rooflight, comprising 8 sections. The 2 end sections were manufactured to slide over the 6 fixed central sections, traversing in a side-to-side, rather than an up-and-down slope operation.Normally supplied in a RAL7015 slate grey to the exterior and RAL 9010 pure white to the interior, the entire framework of this super-sized Dual Sliding Over Fixed Rooflight was supplied in a bronze finish, which was a key part of the architectural design.With such a complex rooflight, with fixed and sliding sections, a quiet and efficient operation was fundamental to the specification. Electronically controlled at the touch of a button, each of the 2 sliding sections of glazing can be retracted easily, revealing generous openings, and sky-only views. An added safety feature is the manual override should the electronic control system stall.On the top floor the existing narrow hall has been opened up and extended to create a new living space. The bespoke glazed dormer by Glazing Vision provides expansive views across the garden, and an abundance of natural light. A large Bi-parting 1-wall Box Rooflight, measuring 4850mm in the width, was set into the sloping roof. At a total height of 1700mm the rooflight also enhances the feeling of loft in this relaxation area.Supplied in 6 sections, the Glazing Vision Box Rooflight was configured such that the 2 central sections were bi-parting, sliding over 2 adjacent fixed sections. Two additional fixed sections and 2 fixed end panels completed this fully glazed, customised dormer. In order to provide privacy from the neighbouring properties, and conform with Planning Regulations, these end panels were manufactured in satin etched glass.Once the 2 sliding sections are retracted, there is a handsome opening, giving an almost balcony-like effect, and encouraging the user to appreciate the garden vista during the day and to delight in the starry landscape at night. The Glazing Vision Bi-parting 1-wall Box rooflight helps to regulate the temperatures and the air quality throughout this upper floor, allowing copious amounts of fresh air to circulate when it is open. Rain sensors, offered by Glazing Vision as optional extras, were also installed to provide additional security should the weather suddenly turn inclement.Chris Dyson Architects are to be complimented on the sensitive integration of a contemporary orangery in this family home as well as on the bold extension of the top floor. Form and function are in perfect harmony and the Glazing Vision rooflights will ensure that there is an ever-changing canopy to the spaces below!This project was shortlisted for the AJ Specification Awards, in the ‘Doors and Windows’ category.

A friendly and welcoming school based in Blackburn in the North West of England, St Stephens Church of England Primary School is a place where pupils can develop their skills in a school that is proud of its Christian values and high standards of teaching. The school has been praised for its philosophy of continuous improvement by a recent ofsted inspection, providing a nurturing environment for children.Continuing the high level of teaching facilities was paramount for the school, and after discovering that the gutters and parapets of the building were aged and leaking, it was vital that a solution was found before this caused issues.The ChallengeIn coordination with Polyroof Products Ltd a survey was scheduled to take place at the site to determine the exact nature of the issues and formulate a solution. Upon inspection it was discovered that the existing waterproofing consisted of a single-ply membrane which had become aged with various leaks being reported and localised repairs carried out with not much effect. The underlying build-up consisted of a galvanised steel metal deck and had been coated in plasticol. Once the survey was complete it was clear that the gutters and capping’s would benefit from a high-performance waterproofing system installation, this would protect from further leaks occurring.The SolutionThe System of choice for this project was Protec Xtraflex. Protec Xtraflex is a highly flexible version of the Protec system designed for coating gutters. Its fast curing technology and imperviousness to standing water fulfilled the rapid solution needed to offer durable waterproofing performance for this project. Taking into consideration the information obtained from the survey, a bespoke Polyroof specification was created to combat all of the issues discovered. The chosen Polyroof Approved Contractor to carry out the work on this project was the KSD Group, a contractor with a wealth of experience in the roofing and construction sector.Once all these aspects were in place, work could officially begin. Firstly, it was highlighted that falls and drainage were already present, so the Polyroof specification made use of the existing falls, combining this with the chosen waterproofing system. During this project, there was no need to strip back any of the existing waterproofing. It was made good where required, allowing a smooth substrate for the new system to be bonded to. Once this stage was complete, the area was cleaned and prepared for the new system by removing any dirt and debris. The Protec Xtraflex system was now ready for installation. Firstly, all surfaces that required it were primed, including the single ply existing waterproofing, which required a Polyroof SP Primer 202. During this installation, all lap joints and bolt heads were applied with Polyroof Butyl Tape and Polyroof Butyl Lap Tape, reinforcing these points before application. Pre-formed high-quality Polyroof drip trims were installed to the outer edge of the metal capping, and new flashings were also installed to cover the exposed insulation at this detail.The first coat of Polyroof Protec Xtraflex was applied to the substrate. This consisted of Xtraflex resin and Polymat 450 and was allowed to cure. Due to the rapid cure technology of the system, this only took 30 – 60 minutes, allowing for quick installation. Once complete, the second coat of Protec Xtraflex Resin was installed and allowed to cure.CompletionThe project was efficiently managed by both the contractor KSD Group and regular Polyroof Technical Services visits to ensure that each aspect of the project from start to finish was carried out within the client’s specification, time frame and budget. The project was a great success showing the high-quality work from KSD Group. The customer can now be confident that this new Polyroof Protec Xtraflex membrane will last for many decades to come.

Glazing Vision worked closely with Architect, A R C Architecture Ltd, and Contractors, Matrod Frampton Ltd, on this incredible project located in Lymington, Hampshire, where the client was looking for their new pool room extension to include a large, flat rooflight, creating a peaceful and naturally lit room, perfect for a relaxing swim. They were also looking for a rooflight within the loft area of the home to allow natural daylight and ventilation to the space.Glazing Vision’s Flushglaze Fixed Multipart Rooflight in Slate Grey Matt was specified for the roof of the pool house, which was an impressive 3800mm x 10360mm in size, which almost mirrors the size of the swimming pool below.Bespoke glass was selected for this particular project. The double-glazed outer pane was made up of heat soak tested, toughened glass which offers a greater resistance to thermal stresses and provides better protection against glass breaking, reducing risk of injury, essential with a pool directly below.Argon gas filled the space between the panes of glass which helps insulate the room and minimises the transfer of heat through the glass along with a black warm edge spacer which is an insulating plastic composite material that becomes a barrier to heat loss.The inner pane consisted of heat soak tested, toughened, PVB laminated glass which prevents glass shattering under impact by holding the shards together on the membrane so they cannot become lethal, and includes a soft coat low E rating of 1.1, helping with the energy efficiency of the room by reducing energy costs.The product was tested to class 1 in accordance with CWCT TN66/67 which is essential for rooflights which might be walked on for occasional cleaning/ maintenance activities, and which will therefore need to support both the weight of people on the glass and their equipment, which may be required on this occasion.The rooflight was supplied in 6 sections with internal back-to-back angles at the joints between each section. The 6 sections were sized to achieve an equal split when viewed from underneath.Our Skydoor Electric Hinged Access Rooflight was specified on the roof of the loft space which is ideal for ventilation and regular access, and offers natural daylight to the space below. Intelligent actuators ensure synchronized operation between the two supporting mechanisms, so the Skydoor opens to a maximum 87° in one fluid, trouble-free motion, providing you with easy access to the space above.The glass was a double-glazed unit comprising of a heat soak tested, toughened, soft coat low E (1.1) outer pane, with Argon Gas within the space between the panes and black warm edge spacer, with the inner pane consisting of heat soak tested, toughened, PVB Laminated glass, and was also tested to class 1.Both rooflights were expertly installed by our sister brand, Glazing Renovations.“Glazing Vision were helpful in explaining the two different upstands required for the different glazing systems. The installation team were helpful and carried out their work in a professional manor.” – Steve Davies, Site Manager, Matrod Frampton.

BEMO supplied over 39,000m² of the N65 parallel and MONRO profiles in PVDF coated aluminium to this part of the Hong Kong-Macau Bridge development. Due to the close proximity of Hong Kong Airport, production had to take place off site, with roof sections moved into place by barge.

The striking appearance of this unique landmark building is a visual reference to the old Whitchurch Airport that formerly occupied the site and the design reflects the two hemispheres of the brain as the four-storey structure comprises twin sections located either side of a spacious central atrium linked by bridges at each level.

Set in the grounds of the former Manor House in West Malling, this stunning new development from Taylor Wimpey has plenty of wide-open spaces for residents to take advantage of. From the renovated walled gardens to the nature walk and playgrounds around the development, this prime location has it all covered.Whilst predominantly a modern new build development, the site contains a number of historically significant Grade II Listed buildings which are being retained and converted into new residential housing. The existing buildings including the Clock Tower, Gardeners Cottage, and the stunning Manor House are to be reimagined internally creating stunning exclusive residential homes. As a condition of planning consent and in line with local conservation conditions, these buildings are to be brought back into use and repaired in a sympathetic manner, ensuring that the original character and heritage of the buildings are maintained.Arden windows, as a key part of Taylor Wimpey’s supply chain for timber windows and doors, were approached by Taylor Wimpey and their architects with the brief to develop a truly bespoke window solution. One that not only meets the conservation requirements in terms of aesthetics of the windows and doors, but that also meet the current UK building regulation requirements and NHBC standards. Working from the architect’s detail drawings and photographs of original fenestrations and section details, the Arden design team were able to recreate an almost identical window and door solution fully meeting the conservation aspects of the project. The final product reflects the intricate profile sections and glazing bar details whilst also achieving the thermal and security requirements of the project.Arden manufactures windows and doors from engineered softwoods and hardwoods at their state of the art factory in Coventry. The 73,000 sq ft production unit incorporates leading-edge fully adaptable CNC machinery alongside time served skilled craftsmen, a winning combination that allows them to produce fully bespoke products on a volume scale.

These railings were used on a roof terrace and lower floor balcony area. On the roof section the standard root fixed version was used, and a bespoke side mounted version manufactured for the lower floor balcony. These posts were cast in ductile SG iron to that they met and surpassed all loading requirements.

Surespan designed and manufactured Glazed Roof Hatches with fixed glazed sections and a vertical end door for the 79&Park residential.The projectOscar Properties commissioned BIG (Bjarke Ingels Group) to design and construct 79& Park residential building. The building is located on the edge of Gärdet, a treasured national park. The architects made conscious decisions throughout the process to provide a sensitive, respectful building with exceptional residences with spectacular views.All Oscar Properties projects aim to add value to the city and the surrounding environment.  79&Park architecture appears like an extension of the park, a gentle hillside seamlessly blending into the nature around it. The project was named Europe’s best housing project in the Internationally recognised real estate competition The International Property Awards.ProductSurespan designed and manufactured multiple glazed roof access hatches in various sizes including 2200 x 2115, 3160 x 1553, and 4175 x 1025.  As part of the glazed roof hatches a vertical door was designed for easy access to the roof spaces. The final glazed hatches were finished off with a polyester powder-coated finish.  Features:These glazed roof hatches feature a specialist sensory control panel. A 1-minute warning sound is activated when rain is detected, and a movement sensor prevents the closing of the hatch. Other features include opening in case of a fire and a keycode pad for exiting.

The Old Court House was on the verge of collapse when purchased by its current owner. The Local Planning Authority had placed a Section 106 agreement on the property detailing its rescue from dereliction and were preparing to increase its listing status to Grade I as it was rumoured to be a hunting lodge gifted by Queen Elizabeth to Robert Dudley, 1st Earl of Leicester. Dating carried out during the course of the works confirmed that the building had been constructed in phases between 1526 and 1613.A team, including the client, Harrison Brookes Architects and Speller Metcalfe Contractors worked closely to bring this house back to life using a range of conservation skills and employing specially made components (bricks and tiles) combined with modern technologies. The Clement 3 range of Conservation Rooflights in a tile profile were chosen to be in keeping with the property’s appearance.Rhys Brookes from Harrison Brookes Architects said “This Grade II listed building was in a dilapidated state and required meticulous and painstaking reconstruction. The inclusion of Clement’s Conservation Rooflights helped us to stay true to the original character of the property whilst also meeting the demands of Building Regulations.”The project has won numerous awards including; RIBA Conservation 2018, the RIBA Regional Award West Midlands 2018 and the RIBA Project Architect of the Year Award 2018.

A bespoke side sliding sectional garage door by Rundum Meir provides a blend of aesthetics and modern functionality in a Victorian house renovation project. The 19 ft x 12 ft garage has been transformed into a quality working space equipped and finished exquisitely, allowing for use as a utility area or office as well as a vehicular. A clear 2900mm span is provided by a sliding sectional garage door. Hand crafted using knot-free Spruce, this bespoke timber door in RAL 6021 Pale Green is fully automated with insulation between the five solid double skinned timber panels.With one third obscure glazing, the door allows for plenty of natural light to enter the garage. The design of the garage door panels and the cross styles in the window were the customer’s wish to satisfy the local conservation area requirements. It is the perfect example of the role a Rundum Meir garage door can play in transforming a garage to give it new purpose and flexibility.

Bodrum Caresse Hotel Technowood pergola roof covering. Pergola sections spanning over 12 metres, Technowood systems have solved an Architectural problem that been around for decades.Hotel Pergola with unsupported spanHardwood timber has been used for many years. Creating roof structures for both interior and exterior applications. Its well known that with timber, the further you need to span means the larger the timber section required. Only to a certain point where steel flitch beams are required. Then the Architect may consider using Glulam beams in a similar arrangement. The sight of steel plates and huge fixing bolts may not be acceptable to the design and so Architects and designers need something else.“From centre stage and into the lime light shines Technowood… Tah Dah…”Technowood is normally fabricated with Aluminium and timber, this is usually acceptable length to 7.5 metres span. In this instance, the fabrication was with GRP and real timber. Glass Reinforced Polymer is able to span up to 12.5 metres.The exterior terraces, designed with massive pergolas; unsupported throughout their length and signed off from the Structural Engineer for conformance.Swimming Pool PergolaThe swimming pool is also covered with an extreme pergola system. The span here is enormous and impressive nonetheless. It provide the vertical structure exactly as the design intended and provides dappled shade across the whole area. There are no upright support pillars to obstruct the walkways or vista.These sections like exactly like huge timber beams, they maybe GRP in the inside but they are certainly real wood on the outside.Brise soleil for terraces and balconiesYou can see from the images that the Technowood has been used to match the design of the pergolas to create brise soleil arrangements on the balconies. These are normal quite small affairs in small spans and not normally in timber, these are different. They are massive in section, huge in length and still in timber.Architects often specify raised timber structures to create shade from the sun. Technowood enable the design to become reality somewhat easier than first imagined. The sections can be moveable, house lighting and speakers too.Installing a Technowood PergolaEach project design must go through the design team at Technowood for approval; They advise on all fixing details. The team have designed and delivered thousands of projects over the last 2 and more decadesInstead of many hands, cranes and dangerous work environments, Technowood systems for Pergolas and Brise Soleil arrangements are lightweight. The fixings, usually hidden from sight resulting in cleaner lines, no flitch plates or nuts and bolts.Contact Technowood to realise your design into the unimaginable…We also have a showroom at The Sky House Design Centre please get in touch to book an appointment.

During the early 19th Century, a large section of the South Bank of the River Thames, London, comprised small wharves, docks and other industrial uses. In more recent years, the site has been used as a delivery depot, however, it is only now that the value of the site has been realised as a prime mixed-use location.

CHALLENGEAs part of a full exterior refurbishment, building envelope contractor, Alumet, required a new façade system that would transform and modernise the exterior of the Jubilee House building, which was originally installed in the early 1970s. Coupled with this was the requirement to improve thermal and energy efficiencies.SOLUTIONKnauf Insulation supplied its Rocksilk® RainScreen Slab to ensure optimal fire, thermal and acoustic performance. The key to Knauf Insulation securing the project was the ability to provide in depth technical support, including complex 3D heat flow modelling calculations which took into account the specific system brackets, which act as a significant cold bridge within rainscreen cladding systems.Knauf Insulation’s Rocksilk® RainScreen Slab was installed on the brick facade of the existing building, which once complete, significantly improved the U-value thus reducing the heat loss through the wall.The insulation layer is a fundamental component of any successful rainscreen cladding system and mineral wool insulation delivers a number of advantages for this type of application. Rocksilk® RainScreen Slab is a Rock Mineral Wool slab containing a water repellent additive, designed for use on masonry wall constructions and as the outer insulation layer in steel frame projects.Quick and easy to install, the product is simple to cut and the slabs knit together to create a snug fit, with no need to tape the joints as may be required with rigid foam boards – ensuring maximum acoustic and thermal performance."We wanted to turn our headquarters into a thermally efficient building and to really project a modern ‘green’ image. The Schueco Façade system, along with Knauf Insulation’s products, helped us to achieve this as well as dramatically reducing our carbon output.We have received some fantastic feedback from local residents saying how good the new façade looks and coupled with the improved thermal efficiencies, we are very pleased."- Alumet Director, Dean Walton

After successfully completing living walls at the McArthurGlen Designer Outlet in Ashford, we were approached to design and implement a similar scheme for McArthurGlen’s newest outlet on the outskirts of Paris.This development exemplifies McArthurGlen’s commitment to sustainability. The scheme was built according to ‘Excellent’ High Environmental Quality (HQE) standards and includes 20,000 square metres of green roofs, 1,000 square metres of living walls and 120 electric parking spaces.The architect, Arte Charpentier wanted to create a ‘rich and welcoming experience’ for visitors and the living walls contribute to that vision. At the heart of the development lies a central ellipse, adorned with two gracefully curved stretches of Biotecture’s living cladding, each spanning an impressive 90 metres in length and standing at a height of 11 metres. Two more expansive sections of living wall frame the east entrance.The living walls are a visually striking architectural feature and help to cultivate a serene shopping environment. In addition to their aesthetic contributions, the plants will play a vital role in improving air quality and promoting biodiversity within the outlet.

Formally known as the Olympic stadium, this structure was constructed in the Stratford district of London for the London 2012 Olympics. After the Olympics, redevelopment of the stadium began, including installation of the new floodlights in March 2015. The 60,000 capacity stadium is now home of West Ham United.The project involved working with 2 different clients on the same project – Populous (Global stadium developers) and Buro Happold (consulting engineers) for 14 no lighting puddles for the London stadium. The driver for the use of composites was seeking a way to reduce the weight at the end of what was then the largest cantilever roof section – so weight at the end was more critical than normal. We also supplied 2000m² of steel gratings to the same project – demonstrating how we can identify the most suitable material for each application.The material used was Flowdeck solid top 41mm deep in RAL 7043. Flowdeck is resin moulded with a 3mm thick applied plate on top of a 38mm thick standard panel. It was fabricated at our facility in Middlesbrough with each one delivered on a phase-by-phase basis to a tight programme.

With the business growing at a rapid rate, the firm has expanded its head office to a purpose-built facility which also incorporates a store, café, and an external garden centre.To make the most of its prominent location at the entrance to the new Seaton Hill development, the building was designed to showcase the brand’s iconic identity. The facade of the offices and warehouse are clad primarily in a palette of blacks and greys using Kingspan Dri-Design Flat Cassettes for the office element and QuadCore AWP Wall Panels for the large retail section. This neutral palette provides the perfect backdrop for more colourful facade elements of royal blue and bright orange which ‘pop out’ from the envelope, both literally and visually. These elements include a ribbon style wrapping which recreates a heart-beat reading and symbolises the HQ’s position as the “heartbeat of Derriford”. This dramatic treatment also helps to break-up the massing of the site.  Selecting all these materials from a single supplier also help to simply logistics, minimise onsite waste and ensure complete compatibility between the elevations.

Situated just two miles from Heathrow and directly under the flight path, the school site poses some difficult energy efficiency, acoustic and thermal challenges. Pollard Thomas Edwards specified the Thrutone fibre cement slates for the main two storey section of the school, not only for the roof but also for vertical cladding, to help address these demands.

Constructed in 2009, Cardiff International Sports Stadium is the most important athletics stadium in Wales, with capacity for 2,553 seated and 2,400 standing spectators. It serves as the headquarters of Welsh Athletics, the organisation governing Welsh athletics and which is part of UK Athletics, the national umbrella body for sport.The stadium has been given a new look in 2019, with the running track as well as the sprint sections and sector surfaces extensively renovated by Polytan. The choice for the new synthetic surface fell on the “professional among sports surfaces” – the Rekortan M from Polytan. It features in many large athletics stadiums around the world, where its outstanding acceleration and tread elasticity have proven the worth of the surface in international elite sport. For the retopping in the Cardiff International Sports Stadium, the complete renewal of the tartan top was accompanied by a change in the colour of the surface: the athletes are now training and competing on a Rekortan M in “Hertha blue”. Hertha blue is an intensive blue shade that became famous the world over when it was first used in the Olympic Stadium in Berlin in 2004. The sprint sections and the sector surfaces in Cardiff, however, remained in classic brick red, presenting a striking visual contrast with the blue running track and the blue run-up tracks in the sectors.The stadium operators decided to use the opportunity of the surface retopping to add a technical innovation, the Polytan SmarTracks time and data recording system. This is designed to enable comprehensive performance diagnostics of the athletes using timing gates embedded invisibly in the surface. The running time, speed, step length, step frequency and jump height of the users can be recorded and analysed. The system is installed not just on an inside lane but also on two sprint sections.

Work started on improvements to the town’s thoroughfare in May 2015 with Contractors Dawnus Construction assigned for the main phase of the project in conjunction with Denbighshire County Council. It involved the complete reconstruction of the carriageway and footways in the southern section of the high street between Wellington Road and Kinmel Street. Trees were planted and new seats and new litter bins were installed throughout.