"roof screeds"

Glasgow’s latest redevelopment project, located on Langside Road, is built upon the former site of the city’s Victoria Infirmary and consists of a large housing development that includes 413 flats, offices and retail space. The 3.75 hectare site, which is situated next to Queen’s Park on the south side of the city, forms an important part of the Battlefield area’s character, with the buildings’ exterior reflecting and complementing the surrounding heritage by using the city's traditional blonde coloured sandstone.  As part of the construction process, Bilco UK was commissioned to supply six ESW-50REM Smoke Vents, in addition to seven E-50TB Roof Access Hatches, to provide the highest standards of safety and efficiency, whilst being sympathetic to the project’s overall design.  Installed onto the roof areas of four blocks of flats by Scottish contractors, Procladd Small Works Ltd, Bilco UK’s ESW-50REM Smoke Vents were specified to provide essential ventilation in the event of a building fire. Featuring a linear actuator operating mechanism that opens the cover to 140 degrees within 60 seconds, the smoke vents ensure compliance with Building Regulations Approved Document B, BS9999 and EN12101-2.  The built-in wind deflector also provides protection against smoke being blown back into the vent in the event of a fire., whilst the newly-designed closed-cell EPDM sponge gasket helps meet Building Regulation air leakage targets by providing a better seal of the cover to the curb. With the addition of a fixed vertical ladder, the smoke vents can also be used by maintenance engineers for roof access.  Billy Baillie, Managing Director at Procladd Small Works Ltd, said: “We have a longstanding relationship of over 20 years with Bilco UK, and will continue to do so over the forthcoming years, due to their impressive product quality and outstanding service. Bilco UK’s Roof Access Hatches and Smoke Vents were incredibly easy to install, and knowing they’re engineered to meet the highest industry standards, it provided both ourselves and the client with the confidence that the installation would set the standard for performance and longevity.” Constructed with corrosion-resistant materials, Bilco UK’s E-50TB Roof Access Hatches were also installed to provide engineers with safe, regular and convenient access to the roof to conduct essential maintenance. Engineered with compression spring operators to provide easy one-hand operation, the roof access hatch meets the requirements of Manual Handling Regulations, whilst the automatic hold-open arm locks the cover in the open position to ensure safe egress. The overlapping cover design, fully welded corners and insulated cover also ensure weathertightness and energy efficiency to deliver the highest standards of resilience. Mark Baird, Sales Operations Manager at Bilco UK, said: “Drawing on our longstanding relationship with Procladd Small Works Ltd, it was fantastic to work together on this project, which has been designed to positively impact the city’s culture. The products installed were manufactured with fire safety and efficiency in mind, delivering assurance of the durability and suitability of the installation for years to come.”For further information on Bilco UK’s complete range of roof access solutions, visit www.bilcouk.co.uk or call 01284 701696. 

When Westminster Cathedral’s roof was first asphalted back in 1903, it would have utilised naturally occurring asphalt deposits dug up from an overseas lake. These days, things are done a little differently. Instead, IKO’s Permaphalt – a polymer modified mastic asphalt – was specified for the extensive reroofing of the Cathedral by Architect, Michael Drury from St Ann’s Gate Architects. “Asphalt had worked well for the Cathedral in the past and there was no reason why it shouldn’t again,” he said, adding the new roofing’s 25 year guarantee clinched the decision for a like-for-like replacement.

ECLISSE are delighted to have been the supplier of choice for this prestigious development in the heart of historic London. The Westminster Quarter development comprises of 102 private luxury apartments, many with private outdoor space. Residents will also benefit from an exclusive gym, 24hr concierge service and landscaped courtyard and the roof terrace and roof lounge have stunning views of the Houses of Parliament and other iconic landmarks. Completion: 2017 Residential Units: 102 Construction Cost: £35.5m Architect: White Ink Architects Client: Taylor Wimpey Contractor: McAleer & Rushe

The Ascent Up and Over step unit / Industrial stair system was specified to create a safe means of access up & over items of mechanical plant & equipment to the roof of the airport terminal building. The Industrial stair unit is supported on rubber spreader feet which provide a non-penetrative support solution on the flat single ply membrane roof. The stair unit is designed in accordance with BS EN ISO 14122-1:2001 + A1:2010 and Building Reg Part K:2013 and manufactured following 1090 factory production control procedures.

Architect: Redbox Design GroupMain Contractor: Tolent Construction Installer: Metcalfe Roofing & Building Services LtdStone: Cebecca LimestoneThe Sunderland Hilton Garden Inn, on the banks of the River Wear, is a 141 room hotel featuring MX curtain walling as well as Aztec 20mm Cebecca limestone Ventilated Rainscreen. Designed By Redbox the architects wanted a light and spacious building without the need for a heavy support system. The glass and limestone mix imparts this vision perfectly. Completed in 2016 The Aztec system was installed by Metcalf Roofing & Building.

The Metro Centre is over 22 years old and the building had been experiencing leaks, a problem which was exacerbated by the numerous changes in plant installations on the roof. The original felt waterproofing had reached the end of its working life and a system was required that would keep the building watertight, help comply with current building regulations, and bring the insulation standards up to Part L. A Cold Bonded Built-Up Roofing System was specified for the project consisting of 40mm Decotherm insulation, a Carrier Membrane, and a seamless Decothane Gamma 20 waterproof ‘cap sheet’.

After worrying roof leaks and subsequent damage were discovered at Lakenheath Community Primary School in Suffolk, an urgent refurbishment of some areas of the roof was required to keep the school open and in a good state of repair. Concertus chose the Sarnafil Plus refurbishment team for the project, as they could provide support every step of the way, making sure the refurbishment ran smoothly. From initial surveys and bespoke specification, to finding the right contractor for the job and supporting them on-site, the Sarnafil Plus package offered a complete solution for a fast, hassle free refurbishment.

Project involved decking a 350m2 the rooftop of a commercial block in the heart of the city. The owners wanted to create a roof terrace for staff. The customer chose the iDecking complete solution for it's superior look. Installation was carried out on an inverted roof. The contractor laid down a double layer of our aluminium frame onto Wallbarn MegaPad pedestals which provide a stable footing for the framework. The composite Moor Oak boards were stamped into position. Installers were able to achieve a great finish by accurately cutting the boards to fit neatly to edges and corners.

DWB Hull, a licensed MiTek roof truss and Posi-Joist manufacturer, recently supplied specially designed Posi-Rafters to form the roof for a large domestic extension. Bespoke end details were incorporated into the Posi-Rafter design to make installation straightforward and to provide solid bearings on to the steel beams and walls. The build had two steel ridge purlins and a central steel at ceiling level, forming a large vaulted ceiling internally. Posi-Rafters were the ideal choice, with plated end blocks sitting directly on to the steel beams with no need for hangers.

Approximately 5,000 square metres of Marley Edgemere and Marley Concrete Plain Tiles were installed as part of a £44m new-build project by Galliford Try at Wixams Retirement Village. Galliford Try led the Wixams Retirement Village project from start to finish, with NRA Roofing and Marley working together for the installation & manufacture of roofing products. Key reasons for the specification of Marley Edgemere and Marley concrete plain tiles included the cost-competitiveness of the tiles as well as the visual appeal and product attributes which would make the installation process quicker and more efficient.

2-6 Cannon Street is a high-end new build commercial office building located in the City of London. Alfresco Floors were commissioned by Frost Landscape Construction to supply and install the GRAD decking and rail systems, which were supported by the Buzon pedestal system. This was a particularly challenging project as steel planters were strategically located in the middle of the roof terrace so installation had to be carried out around the numerous planters. The finished outdoor space at 2-6 Cannon Street provides office workers with a unique roof top terrace.

Lord's Cricket GroundBauder LiquiTEC Balcony and Walkway, LiquiBALKON SystemSynopsisLord's Cricket Ground is a famous cricket venue located in St John's Wood, London. There are various Bauder waterproofing systems installed throughout the venue but these images are from the Edrich Stairs on the third level.Bauder Building BoardProject:Lord's Cricket GroundProject type:RefurbishmentLocation:Basingstoke Waterproofing:LiquiTEC Balcony and Walkway systemRoof size:25m²Specifier:Rider Levett Bucknall LimitedApproved contractor:Higham Flat Roofing Ltd

Making the most of outdoor space in an urban environment is very important. With land at a premium, more people are converting their flat roof space to a garden retreat. How do you get to it though? A full size staircase takes up a lot of room and can be quite expensive, especially for occasional use. A Premier Loft Ladders customer had exactly that problem at her Hammersmith, London apartment. Learn how the Elite loft ladder saved both space and money, while still providing safe and convenient access to the flat roof...

A contractor client was working on a retro-fit balcony and flat roof project in Brighton. The waterproofing membrane had tapered insulation placed on top and the contractor discovered ballasting the insulation was needed, only once on the roof. The door thresholds were too tight for a traditional decking system with joists. Wallbarn advised for paving slabs on 9mm rubber pads; then 30mm thick ipe timber tiles mounted onto Adjustable Pedestals. The buildup was under 100mm and the overall finish of the tropical hardwood was glorious. The architect was relieved that we could produce a solution, the client was delighted.

Products: Flexi heavy – Modular Frameworks & Flexi Access – Bespoke access platforms. Services: Air-handling units & associated access requirements. Roof build-up: Warm roof design – PIR/PUR insulation with PVC/TPO field membrane. Pump House were proud to have been chosen as the preferred supplier of building services support systems to the project, with support frames required to fourteen rooftop air-handling units. Each framework was also accompanied by a bespoke access platform to one longitudinal side of the air-handling units for maintenance purposes.

Utilising several innovative Glazing Vision rooflight products combined with some insightful architectural design detail from Chiles Evans & Care Architects, along with bespoke high specification finishing from Terry Huggett Developments, this retro-modern home is simply stunning, and even featured on Channel 4's Grand Designs.The 1970’s were a revolutionary period of acceptance and moving forward as a society, with many important social movements being founded in this decorated time. Along with this, the 70’s also had a huge influence on the interior and exterior of buildings all over the world. 70’s vogue has also had a heavy effect on modern interior and exterior design. Ranging from complex designs of wallpapers, to simple yet effective patterns on rugs, retro designs are becoming more and more popular in present times.Solidifying this proposal is Ravine House, a retro-contemporary build where Glazing Vision, Chiles Evans & Care Architects (CE & C Architects) and Terry Huggett Developments have collaborated together demonstrating the enduring quality of 70’s design.The original house, built in 1967, adopted a mid-century American exterior; with large windows looking out at the surrounding gardens that were framed by wide eaves and a low-profile roof. Taking inspiration from Frank Lloyd Wright, and other famous Architects from the mid-20th century, the house showcases a real ‘wow factor’. As conversations with the homeowner quickly progressed it became apparent how special this home truly was.The project was separated into three parts. Two stock sized Flushglaze Fixed Rooflights were the first port of call for the homeowner and the architect. It was imperative that any changes made to the original exterior of the house did not impact the simplicity of the roof lines, therefore the Fixed Flushglaze Rooflights were selected.The double pitched roof meant that it was not possible to set the rooflight into the roof pane without compromising the water-proof integrity of the roofing. However, the Flushglaze’s simple frame means that although they sit proud of the roof, they remain visually unobtrusive. The standard Flushglaze Fixed Rooflight is a very popular item in our wide range of products, with a minimum span and width of 400mm and ranging to 4200mm subject to area m2 limitations. In this case, the Flushglaze Fixed Rooflights were both 1200mmx 900mm. With a frame colour of RAL 7015 (Slate Grey), they bring a simple yet highly effective essence to the property. Deciding to purchase a stock size Rooflight, rather than a bespoke size can be a much more cost-effective option.The second part involved a singular stock sized Pitchglaze Roof Window. Adopting our pioneering ‘frameless’ design ethos, once installed, this product provides the building occupants sky only views through the aperture, something not usually found with a traditional roof window without requiring an upstand. As a roof window it is UKCA and CE marked and designed to be installed in pitched tiled roof applications flush with the tiling line and to be used at roof pitches between 15° and 60° and comprising of Qualicoat approved polyester powder coated aluminium framework. The Pitchglaze can also be supplied in either landscape or portrait orientations. In this case, the Roof window sat at a 22° angle with “vision area” dimensions 1000mm x 3000mm.The third part of the project consisted of a solitary Triple Glazed Flushglaze Rooflight, with three Wall Abutments. The homeowner opted to go “made to order” for this luxurious item, with a span of 1205mm x 2825mm. The Wall Abutment detail is part of the Flushglaze framework and is secured using suitable fixings, that depend on the structure being used. The Flushglaze range of Rooflights have been independently performance tested and approved by the British Board of Agrément (BBA) and are also classified by The Official Police security initiative, Secured by Design and tested to LPS2081/1 with certification by the Loss Prevention Certification Board. This helps to enhance resistance to opportunist intruders attempting ‘stealth’ attacks to gain entry, which are often carried out in residential areas.‘For me, this project is simply a once in a lifetime opportunity and I enjoyed every minute of it’ Terry Huggett, Terry Huggett Developments.The project brings with it a unique element of family. With the homeowner inheriting the house from his parents – Terry Huggett cites that his love for mid-century American architecture stemmed from family holidays to places like California, and other cities and states in western America. This connection with the project for both Architect and Contractor, along with their personal chemistry is obvious, as is the care and precision of the build exhibited everywhere within the residence! The home also boasts many different structural qualities that distinguish it from other houses up and down the country. From a heated driveway to a Borehole that provides ‘Evian quality’ water from tap, the home showcases many unique and desired aspects.Overall, the project took approximately three years to be completed. Now, Ravine House is gaining publicity up and down the country and has been nominated for various RIBA awards. It is visually clear that the home is something truly special that simply defines quality and displays an incredibly high level of Architectural and Contractual ability.

Residents of a community on the hillside by Loch Craignish, one of Scotland's most beautiful sea lochs, have a new and unique village hall with a roof that is sympathetic to the surroundings, thanks to Eternit's fibre cement profiled sheeting.The old village hall at Ardfern in Argyll and Bute had been built traditionally with most recently, a corrugated metal roof which had corroded and leaked. Architect Tom McCardel was tasked with giving the villagers a community facility capable of handling a vast range of activities and he specified Eternit's fibre cement profiled sheeting for Craignish Village Hall for several reasons.Its light weight meant the main spaces of the building did not have to be taken up with supporting framework, its green painted finish blends more into the landscape than traditional gloss paint, and its roof had to be resistant to the corrosive atmosphere of the sea coast."I specified the Eternit sheeting because of its lightweight qualities, cost effectiveness, ease of detailing and appearance" he said.

Caring Wood is a country home for three generations of the same family, incorporating formal, communal and private spaces, roofed with Keymer - Kent Peg Antique.

The versatility of zinc is clear at Imperial Tobacco’s Bristol HQ, where it moves from roof to facade to become a smart coat that will withstand all weather.

PICV and ABV EOL Valve sets for the Fan Coil Unit Installation and Air Handling Units as the retractable roof was installed over No.1 Court.

Plygene Gutterline system increases gutter capacity as part of full roof refurbishment to prevent further leaks at one of the UK's leading pallet networks

This multi award-winning museum has taken form with a copper clad envelope featuring high quality rainscreen insulation and pitched roof insulation

This multi award-winning museum has taken form with a copper clad envelope featuring high quality rainscreen insulation and pitched roof insulation.

When looking for a cost-effective, but premium roofing solution for a care home in Dudley, Riven Edgemere was specified to provide the perfect option, on budget and on time.

A case study on applying acoustic roof systems in the Educational sector, with a detailed description of common project challenges and proven solutions offered by Ash & Lacy

In a stunning architectural statement, CUPA PIZARRAS R17 slate has been specified to meet the design challenges of a former Georgian windmill renovation at Fort Green, near Aldeburgh in Suffolk. The first project of its kind in the UK, the natural slate was individually cut and fixed through expert craftsmanship to accommodate the building’s exterior curve while also providing crucial protection from the harsh coastal environment. Originally, the windmill walls were going to be clad in cedar shingles however, contractor ELC Roofing recommended using the rectangular CUPA R17 slate from CUPA PIZARRAS as a more weather-resistant alternative. ELC Roofing Owner, Edward Carlo, explains: “The R17 is a natural, non-carbonated blue-black slate with non-rusting metallic particles and thin laminations. From our perspective, it’s a tried and tested product that we specify and install on a lot of our projects – especially in coastal situations like this.” The slates, which protect against the salt water and wind, have been fitted on both the windmill’s curved wall, its pitched roof and elsewhere adding design details to the property’s walls. He goes on to say: “Aesthetically, the ocean environment has inspired the material choice with the slate mirroring the scales of a fish. This gives the windmill a dramatic architectural style; one that also sympathetically ties into the slate roof of the neighbouring cottage, which we replaced with CUPA R17 the previous year. “As far as I am aware, nothing like this windmill has been done in the UK. It was a case of starting from scratch to devise the optimum installation method, which involved a lot of detailed calculations.” For the tower, which has a 15m circumference at the base tapering to 11m at the top, the team initially removed the thick render on the windmill wall, taking it back to the original brickwork. Next, to meet the challenge of the curve and tapering of the wall, 50mm counter battens were fitted to the tower’s brickwork. Then, multiple strips of ply were cut and glued together to create the curve. These panels were screwed to the counter battens to provide an anchor for the fixing system. The ply was also primed to protect the surface from water ingress and a breathable membrane applied to protect the brickwork. In terms of fixing the slates to the panels, Edward said: “For a more corrosion and wind-resistant solution, I decided on the French technique of a stainless steel hook fixing system to install the slate, as opposed to nails.” Ensuring the layout worked exactly with the curves, the slate was lasered from top to bottom to perk it out, which took five days to do. Horizontal tiling battens were also marked to ensure the slates were fixed at the right height. Every single slate was cut and fixed individually to accommodate the curve and ensure they aligned with the building’s inset windows as well as other architectural details - a very precise process that required expert levels of craftsmanship. Preventing the slates from getting smaller at height, the team designed-in a series of lead bands that go all around the building at each storey level. These sit underneath the windows to create a consistent appearance visually. The windmill’s domed copper roof existed already and the adjoining tower, which is horizontally clad in a white weatherboard, features a slated pitched roof. ELC Roofing has again used CUPA PIZARRAS spanish slates. In this instance, the roof curves to the back end with four leaded hips to one end and two to the other with a connecting lead ridge. This time the slates were fitted to 20 x 50mm battens with a layer of permeable membrane. This part of the roof also features a striking onion-shaped finial. Expertly crafted by ELC Roofing, the finial is produced out of a patchwork of small pieces of soft copper, topped off with a fish that acts as a weather vane and includes stunning marble eyes. To the other side of the clad tower, CUPA PIZARRAS slate has been used to create a vertical square panel detail to the front of the building and fixed using the hook system again. Commenting on this challenging project, Edward said: “Work on site started before the first Covid-19 lockdown so as well as the challenging weather conditions that a coastal location like this presents, the team also had to complete the work with government guidance and restrictions in place. Regardless, the client is overwhelmed with the end result and so are we.” To find out more about the CUPA PIZARRAS range of natural slate visit: https://www.cupapizarras.com/uk/natural-slate-roofing/

Wrexham General Station is a main line railway station and the main railway station serving Wrexham, north-east Wales. The station was first opened in 1846 and expanded in 1912. It comprises four operational platforms with two disused bay platforms at the southern end of Platform 1. Until the early 1980s what is now Platform 4 of Wrexham General, was a separate station: Wrexham Exchange.After working with MPH Construction on a number of station refurbishment projects across Wales, the Principal Contractor approached Twinfix to carry out the survey for the canopy refurbishment at Wrexham Station as well as designing, manufacturing and supplying the replacement roof glazing for 3 of the platform canopies at the station. The panels were installed by a third-party roofing company.The work spanned 532 square metres and comprised of the innovative Multi-Link-Panel Non-Fragile (NF) system glazed with 6mm Georgian wired polycarbonate.Each panel of the innovative Multi-Link-Panel NF system comprises of a powder-coated aluminium frame and fitted with polycarbonate glazing. The panels are built completely off-site in a quality-controlled factory environment, reducing the risk, and cost, of site mistakes, and are delivered on-site fully glazed and ready for rapid installation. The system has a unique linking design feature that results in incredibly quick installation times, making the system very much suited to rail work due to its restricted possession times.The Multi-Link-Panel NF system is an innovative roof glazing product that has been well utilised for many years on station canopy roofs, and it has been thoroughly tried and tested in that time.It was the chosen system for this project for a number of reasons:sustainability– these panels are virtually unbreakable in manufacture, transit and in situ, meaning that, unlike glass, maintenance costs will be eliminated.safety– Twinfix Multi-Link-Panel NF (Non-Fragile) conforms to the HSE recommended test method ACR[M]001:2019 (as outlined in document HSG33) and achieves a ‘B’ Classification.off-site construction– The panels are pre-assembled in Twinfix’s factory ensuring strict quality guidelines are adhered to, which is not always guaranteed when roofing products are assembled on site.ease of access– The Multi-Link-Panel NF system can be fitted with In-Line Access Hatches, to allow cleaning of gutters and roof. These hatches are hardly visible and allow safe access through the glazing without needing to get on the roof.weight– The Multi-Link-Panel NF is light in weight and due to its modular format, it is very quick to install which allows for short rail possession works.appearance – The Georgian wired polycarbonate glazing combines the appearance of Georgian wired glass with all the material benefits of polycarbonate. As well as improving the overall environment in a lighter, brighter station, the addition of the Twinfix Georgian wired polycarbonate at Wrexham General Station has preserved the building’s unique appearance and character, while providing modern levels of safety for passengers and staff.

Hethel Engineering CentreBauder Thermoplan FPO single ply system with Bauder solar PV systemSynopsisHethel Engineering Centre supports high performance engineering companies located throughout Norfolk. The original building at the centre had been operating at maximum capacity and they urgently required a new building to satisfy increasing levels of demand. The client wanted the new facility to meet a high level of sustainability, achieving a BREEAM excellent rating and using key renewable technologies, such as photovoltaics (PV) to minimise its environmental impact.Bauder Building BoardProject:Hethel Engineering CentreLocation:Hethel, NorfolkProject type:New buildRoof size:2,500m²Specifier:NPS GroupApproved contractor:Voland AsphalteThe specificationBauder’s Thermoplan single ply membrane was specified for the new building’s 2,500m2 roof due to its longevity. Roof areas totalling 500m² were fitted with 160 PV Modules, enabling the centre to generate at least 44.23 mWh of solar power each year and annual CO² savings of 23.40 tonnes. The PV system was installed without any penetration of the waterproofing or roof deck, ensuring the integrity of the roof is completely upheld. The simplicity of the installation also meant that approved contractor, Voland Asphalte, could install the entire PV array in just one day.Products appliedBauder solar PV system160 solar photovoltaic modules were installed with an expected energy generation of 44.23 megawatt-hours and a kilowatt peak of 47.20 along with Bauder's Thermoplan single ply membrane.  Project challengesThe centre remained operational throughout the works, which caused logistical challenges, however all deliveries were timed as not to conflict with vehicles moving in and out of the facility. The work at HEC was completed on time and to budget, providing the client with an innovative roof that boasts extraordinary environmental credentials.System installedThermoplan Single Ply System 1 Bauder Thermoplan FPO FPO membrane with laminated fleece for adhered installations; pre-coated cross weave polyester reinforcement for high levels of tear resistance.2 BauderPIR M 60An efficient PIR flatboard insulation with aluminium foil facing on both sides and rebated edges to remove a thermal bridge.3 BauderTEC KSDA technically advanced self-adhesive elastomeric bitumen air and vapour control layer with an aluminium foil facing for vapour impermeability.AdvocacyKarl Manning at NPS Group: “Hethel Engineering Centre is a perfect example of a project where outstanding workmanship and top quality products can harmoniously come together to deliver an exceptional, sustainable roofing solution. The Voland team in collaboration with Bauder provided the highest degree of technical support throughout the project, helping us overcome any issues we encountered promptly and efficiently.”

Roofing slates by Welsh Slate star in presenter’s new TV programme.Roofing slates by Welsh Slate were the material of choice for TV property expert Sarah Beeny’s own home-in-the-making which is the star of the Channel 4 series “Sarah Beeny’s new life in the country”.The “Homes on 4” series follows Sarah and her family (husband and four sons aged 11 to 17 years) as they swap London life for a new start on a 220-acre, semi-derelict former dairy farm in Somerset, where they are building a modern and sustainable stately home of their dreams.

The meticulous refurbishment of this Grade II Listed landmark provides a stunning range of luxuriously specified apartments. Phase 2 of this project included the installation of FSC certified Hardwood decks to create a series of private roof terraces adjoining the larger apartments. This project was particularly challenging due to the many curved corten steel planters, upstands, steps and seating areas but using the Buzon PB pedestal range to support the decking our installation team achieved seamless surfaces across all the terrace areas. The finished private roof terraces provide residents with the perfect outdoor space.

O1A Architects oversaw the conversion of a former Gordon Ramsay restaurant in Islington into two luxury town houses with roof gardens and many unique features. O1A chose DRU Metro 100XT/2 corner gas fires for the main living areas in the properties. They utilise the balanced flue system to be flexibly located anywhere in the building without the need for a chimney. False chimneybreasts have been created in each property to house the impressive log-effect fireplaces. They also accommodate the flat screen TVs making perfect focal points and conceal the concentric flues, which exit the building through the roof.

Nobu Hotel is a new development in Shoreditch, East London, and was opened by Hollywood legend Robert De Niro and Japanese chef Nobu Matsuhisa in May 2018.The design of the five-storey building – which has 150 hotel rooms and suites – is a nod to the area’s industrial past with a ‘frayed edge’ look of stepped balconies formed with glass fibre, reinforced concrete and cantilevered steel beams. The design has also been likened to that of a cruise ship and received much critical acclaim.The roofing system covered 1500 sq. m, which included a green roof area and tiered balconies.

Location: LondonMain Contractor: Berkeley GroupLondon Dock Block F is situated in the heart of Wapping, London, with a magnificent choreographed central water feature and the finest selection of high-quality new homes.The building, which will provide a total of 360 new apartments, is split into blocks at different heights to a maximum of 16 storeys, including communal roof gardens, courtyards and green roofs.The OBEX Class B Interface Sealing System and the Class A1 Breather Membrane System were specified in order to achieve full regulatory compliance and meet the correct performance standards.Quality Apartments: 360

The development of 33 King William Street provides 227,000 sq ft of stunning office space and a quarter acre roof top garden. Buzon UK were specified to install the Buzon pedestal system to support Iroko timber decking and a large area of paving to the spacious roof terrace creating a fantastic relaxation space for the office occupants to enjoy. Buzon pedestals are seriously strong, simple to install and are capable of supporting loads of more than 1000kg per pedestal so were the perfect choice of raised floor support system for this complex exterior terrace of contrasting materials.

The Brighton Two tier shelter is a stylish and versatile two tier shelter; units can be added to form a larger shelter. Shelter manufactured from hot dipped steel Galvanised 70 x 70 box section to BSEN ISO1461 Transparent PET 4mm roof Aluminium fixing straps All fixings to be galvanised or aluminium Nyloc nuts are used for safety Angled roof BREEAM AND CODE FOR SUSTAINABLE HOMES COMPLIANT This bike shelter can help contribute towards gaining ENE8 Cycle storage credits when used in the appropriate situation, under the Code for Sustainable Homes

Project: Ball Corporation – New Bottling Plant Year: 2020 Project Architect: CastleOwen Assembly:Roof – APL 65ZS aluminium standing seam twin-skin built-up system Walls – APL StrongBak™ with external vertical APL profiled cladding Size: • Approx 10,000 m² of roof & wall systems over 2 phases Special Features: • Building 14m high with limited site space • FM (Factory Mutual) approved non-combustible construction • 60/240 fire rating required plus special acoustic requirements Building Location: • Wakefield, Yorkshire