"roof screeds"
5,576 results found
Relevance
Showing 1-36 of 1566
Cemfloor Screed On-Site Installation Procedures
Cemfloor Liquid Screeds
Guidelines for installing Cemfloor liquid screed. Cemfloor should only be installed by approved contractors who have been trained and approved to install Cemfloor screed.
Warm Weather Guidelines For Cemfloor Screed
Cemfloor Liquid Screeds
Cemfloor screeds are cement based flowing screeds and therefore care must be taken during placement in summer months when the temperatures can rise above 25°C.
Cemfloor Screed Cold Weather Guidelines
Cemfloor Liquid Screeds
Cemfloor screeds are cement based flowing screeds
and therefore care must be taken during placement
in winter months when the temperatures can drop
below 5°C.
Ronafix for Screeds
Ronacrete Ltd
Ronafix screeds are site batched screeding mortars and fine concretes. The mix design for each is Ronafix admixture, cement, medium grade sharp sand, aggregate as determined by the mix design, plus water. The components are measured by weight or by volume on site and mixed to form the screed.
They are used with a primer of Ronafix and cement which achieves monolithic adhesion to correctly prepared concrete or screeds.
Ronafix screeds are used to lay new screeds and toppings as thin as 6mm bonded or 35mm unbonded or floating. The cured mortar bonds securely to suitably prepared surfaces and is water resistant.
Topflow Screed A Free-flowing flooring screed
Tarmac
Topflow Screed A is a quick drying, pump applied, free-flowing floor screed suitable for most applications,including underfloor heating.
Designed to provide a smooth level surface in both commercial and domestic buildings prior to the application of floor finishes, Topflow Screed A can be used bonded, unbonded or floating. It is particularly suitable for use with underfloor heating. For advice on specifications and for proprietary systems contact your Tarmac representative.
Suitable for all residential and commercial floors carrying pedestrian traffic within BS8204 classification.
Compatible with the majority of timber frame construction systems due to its density at 40mm thickness (80kg/m2).
ARDEX Screed Drying Times
Ardex UK Ltd – High Performance Flooring, Tiling, Screeding and Building Products
ARDEX Screed drying times compared to standard sand and cement screeds.
Dry Screed Panel 28F
Soundis
Dry Screed Panel 28F
ARDEX Screed Thickness Guide
Ardex UK Ltd – High Performance Flooring, Tiling, Screeding and Building Products
Table showing all ARDEX Screeds with recommended thicknesses for bonded, unbonded and floating screed types.
IKO Technical Guidance - Screeds
IKO UK
IKO Technical Guidance - Screeds
Rapid Drying Screeds
Mapei (UK) Ltd
A guide to Mapei's Rapid Drying Screed Binders
Topflow Screed C Belitex
Tarmac
Cement based, quick drying, free flowing screed that can be laid quickly, trafficked after just 24-48 hours and dries within 14-21 days. Topflow Screed C Belitex is a solution that provides you flexibility in installation and your overall build programme.
Screed requirements for SENSO
Senso UK Designs Limited
Screed requirements for resin floor
Ronafix Underfloor Heating Screed Admixture
Ronacrete Ltd
Ronafix Underfloor Heating Screed Admixture is a liquid polymer admixture which provides a high strength screed. The increased strength of the screed allows it to be laid in thin section, from 40mm, which in turn ensures improved thermal output from the underfloor heating system saving money on energy consumption. Screeds containing Ronafix Underfloor Heating Screed Admixture also dry faster than conventional sand : cement screeds meaning the commissioning process can begin earlier (after only 7 days) and can also be opened to foot traffic after 24 hours.
Advantages
Thin sectionfrom 40mm
Faster commissioning of heating
Improved thermal outputheats up much quicker than traditional screeds
Can be walked on after only 24 hours
Ronafix Pre-packed Floating Screed 35mm+
Ronacrete Ltd
Ronafix Pre-packed Floating Screed 35mm+ is supplied as a pre-packed, two component, ready to use mortar for laying floor screeds on insulation boards. Ronafix Pre-packed Floating Screed 35mm+ is supplied complete with all the correct dry components in a bag and a bottle of polymer gauging liquid.
Ronafix Pre-packed Floating Screed 35mm+ is used to lay minimum 35mm floating screeds for residential applications. Screed thickness should be increased for medium to heavy duty use, The screed is resistant to water, frost, and medium to heavy wear when covered with a suitable flooring.
Ronafix Pre-packed Wearing Screed 15mm+
Ronacrete Ltd
Screed 15mm+ is supplied as a pre-packed, two component, ready to use mortar for laying floor screeds. Ronafix Pre-packed Wearing Screed 15mm+ is supplied complete with all the correct dry components in a bag and a bottle of polymer gauging liquid. Ronacrete Standard Primer two part polymer cement bonding agent is required for bonded screed applications.
Ronafix Pre-packed Wearing Screed 15mm+ is used to lay new granolithic screeds as thin as 25mm for heavy duty bonded application. Excellent adhesion can be achieved to suitably prepared surfaces and the screed is resistant to water, frost, and to heavy wear. The use of granolithic floating and unbonded screeds is uncommon and advice should be sought from Ronacrete Technical Department.
Cemfloor NH Technical Data Sheet
Cemfloor Liquid Screeds
Cemfloor NH is a specially formulated self levelling cementitious floor screeds. Cemfloor NH can be applied to
a wide range of floor types.
Cemfloor NH is a mixture of Cemfloor binder, cement, water and a suitable sand and is a high performance screed which complies with EN 13813:2002 ‘Screed Material for Floor Screeds’.
Cemfloor Level Plus TDS
Cemfloor Liquid Screeds
Cemfloor Level Plus is a specially formulated ultra-thin self levelling cementitious floor screed. Cemfloor Level Plus is a mixture of Cemfloor binder, cement, water and a suitable sand. Cemfloor Level Plus is a high performance screed which complies with BSEN 13813:2002.
Cemfloor Level Plus is specifically designed for use as a thin section screed at a depth between 12-50mm and to bridge the gap between bagged SLU materials and standard screeds.
Hush Under Screed Acoustic Membrane
Hush Acoustics
Hush Under Screed Acoustic Membrane has been designed to isolate a screed from the structure to comply with UK Building Regulations. By isolating the screed you ensure impact noise does not travel through the masonry structure. This material is commonly used in New Build Development and is an alternative solution to Robust Details acoustic membranes.
Hush Under Screed Acoustic Membrane
Hush Acoustics
Hush Under Screed Acoustic Membrane has been designed to isolate a screed from the structure to comply with UK Building Regulations. By isolating the screed you ensure impact noise does not travel through the masonry structure. This material is commonly used in New Build Development and is an alternative solution to Robust Details acoustic membranes.
Ronafix Pre-packed Screed 6-50mm
Ronacrete Ltd
50mm is supplied as a pre-packed, two component, ready to use mortar for laying floor screeds. Ronafix Pre-packed Screed 6-50mm is supplied complete with all the correct dry components in a bag and a bottle of polymer gauging liquid. Ronacrete Standard Primer two part polymer cement bonding agent is required for bonded screed applications.
Ronafix Pre-packed Screed 6-50mm is used to lay new screeds and toppings as thin as 6mm for light duty bonded and 35mm unbonded or floating applications. Screed thickness should be increased for medium to heavy duty use, Excellent adhesion can be achieved to suitably prepared surfaces and the screed is resistant to water, frost, and medium to heavy wear.
RonaScreed Fast Drying Underfloor Heating Screed Additive
Ronacrete Ltd
RonaScreed Fast Drying Underfloor Heating Screed Additive is an additive for site batched screeds is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds. It also promotes high early strength, permitting early access by following trades.
RonaScreed Fast Drying Underfloor Heating Screed Additive is supplied in concentrated form and used in low dilution. It provides rapid drying and early laying of floor coverings such as sheet vinyl, tiles, carpet etc. When laying onto insulation the minimum screed thickness is 65mm. Heating pipes require a minimum cover of only 30mm of screed.
Time to reach 75% RH
15 days
ARDEX A 29 - Rapid Drying Cement for Internal and External Screeds
Ardex UK Ltd – High Performance Flooring, Tiling, Screeding and Building Products
Developed to perform in real UK site conditions, ARDEX A 29 produces a Rapid Drying Screed that offers unique application and performance benefits to professional screeding contractors, combining workability, speed and performance.
Floors and Screeds - Ultra-lightweight flooring
Cemfloor Liquid Screeds
Ultra-lightweight flooring
An ultra-lightweight flooring solution has been successfully installed in the Battersea Power Station redevelopment project. The system comprises a pourable lightweight aggregate and liquid cementitious screed topping.
The iconic Grade II listed Battersea Power Station is at the heart of one of central London’s largest new developments. The £9 billion project will see the creation of a vibrant new destination for London, housing a community of homes, shops, cafes, offices, leisure and cultural venues, with over 19 acres of public space.
As part of the redevelopment of the power station, a lightweight floor build-up was required.
Screed Solutions
CEMEX UK
Cemex Sand Cement screeds are branded as Readyscreed and include Readyscreed Original, Reinforced and Early Strength. Other permutations can be designed to suite specific applications such as SBR.
All Readyscreed products are available in several strengths. With cement contents equal to volumetrically proportioned mixes 1:3, 1:4 and 1:5 (eg 1 part cement to 4 parts sand).
Sand Cement screeds supplied by CEMEX are Factory Produced and Quality Controlled, they and delivered to site ready to use and retarded for one working day. All constituents comply with the current British and European Standards, thus, providing our customers with a Quality Assured product over and above that available from site mixing which often contain constituents of varying amount and quality and are mixed in a
RonaScreed 8 Day Overlay Fast Drying Screed
Ronacrete Ltd
RonaScreed 8 Day Overlay screeding additive is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds. RonaScreed 8 Day Overlay gains strength quickly, permitting early access by following trades.
RonaScreed 8 Day Overlay is supplied in concentrated form and used in low dilution. It promotes rapid drying and early laying of floor coverings such as sheet vinyl, tiles and other materials.
RonaScreed 8 Day Overlay is typically incorporated within 35mm to 75mm thick floor screeds and applied by competent screeding contractors. RonaScreed 8 Day Overlay is simple and straightforward to use and can be purchased and laid by non-licensed screeding contractors.
Gyvlon ECO Flowing Screed
Anhydritec Ltd
This is our go flowing screed for most situations. ECO can save 92% carbon footprint on your projects and the binder is made for 98% recycled material.
RonaScreed 1 Day Overlay Rapid Drying Screed
Ronacrete Ltd
RonaScreed 1 Day Overlay Rapid Dry Screed is a cement replacement for rapid drying screeds used when laying bonded, unbonded or floating screeds prior to covering with vinyl sheet or other coverings. The fast drying properties allow screeds to be covered with moisture sensitive finishes as early as one day after application.
Drying times are determined by many factors including humidity, temperature and mixing. An effective damp proof membrane must be in place.
Hush Over Screed Acoustic Membrane
Hush Acoustics
Hush Over Screed Acoustic Membrane consists of a fine granulate of recycled rubber with a cork and PU elastomer bonding agent. Hush Over Screed Acoustic Membrane is a resilient layer suitable for use under most floor finishes.
It has been developed for use many market sectors including Residential, Industrial, Educational, the Healthcare sector and the Leisure sector. Hush Over Screed Acoustic Membrane has been developed to meet the ctriteria of all UK Building Regulations including Document E, Section 5 and Part G.
Laitance & Anhydrite Calcium Screeds
The Solid Wood Flooring Company
A technical review of how to ensure a Anhydrite / Calcium Sulphate screed is ready for wood flooring.
Supaflo HTC - High Thermal Conductivity Flowing Screed
CEMEX UK
Supaflo HTC is a self compacting flowing screed based
on an anhydrite binder. It is specifically intended for use
with underfloor heating systems and is formulated to
provide a floor with higher thermal conductivity when
compared to traditional cement, sand screed and regular
flowing screed.
Supaflo HTC is for use with both warm water and electric
underfloor heating systems that use conventional heating
sources and renewable technologies. A screed with higher
thermal conductivity will heat up and cool down more
rapidly providing greater system control and improve
comfort levels.
ARDEX A 70 GYPFLO Quick Drying Flowable Calcium Sulphate Screed
Ardex UK Ltd – High Performance Flooring, Tiling, Screeding and Building Products
ARDEX A 70 GYPFLO Quick Drying Flowable Calcium Sulphate Screed is ready to receive floorcoverings in as little as 14 days and boasts excellent flow properties. Where most Calcium Sulphate screeds take 40 days at 40mm! It's also ideal for underfloor heating.
Cemfloor Therm Technical Data Sheet
Cemfloor Liquid Screeds
Cemfloor Therm is a specially formulated self levelling cementitious floor screeds. Cemfloor Therm can be applied to a wide range of floors.
Cemfloor Therm is a mixture of Cemfloor binder, cement, water and a suitable sand. Cemfloor Therm is a high performance screed which complies with EN 13813.
RonaScreed Self Smoothing Exterior Screed
Ronacrete Ltd
RonaScreed Self Smoothing Exterior Screed is a flow applied industrial flooring system. It provides a hard, durable floor surface for new floors or for renovating existing surfaces. The material gains strength quickly and can be accessed by foot traffic in 45 hours and by light to medium traffic after 24 hours @ 20ºC.
When applied correctly, RonaScreed Self Smoothing Exterior Screed produces a smooth, durable wearing surface. The application thickness can vary, ranging from 5mm to 40mm. For optimum performance and appearance RonaScreed Self Smoothing Exterior Screed should be applied by specialist industrial floor layers with expert knowledge of preparation, mixing and application.
GIFAfloor Hugo Dry Screed Panel Data Sheet
Access Floors Distribution
Gypsum fibre pre-fabricated floor screed panels.
Gyvlon Thermio+ - Screed specifically for underfloor heating
Anhydritec Ltd
GYVLON THERMIO+ SCREED Flowing screed specifically designed for use with Underfloor heating systems, allowing only 20mm cover to pipes and offering unrivalled heating performance. Thermio+ provides a smooth level surface in both commercial and domestic buildings prior to the application of floor finishes. It can be used in unbonded or floating constructions.
CMS Danskin Acoustics Regupol 6010SH Screed TDS
CMS Danskin Acoustics
CMS Danskin Acoustics Regupol 6010SH Screed Technical Datasheet
Showing 1-36 of 1566