NBS Source
I'm a manufacturer

"planting"

1,336 results found

Sort by:

Showing 1-36 of 258

Sponsored
Hanson Brick Plant

Hanson Brick Plant

Eternit

Profile 6 was specified on the 'super' brick plant because it is a high strength fibre cement sheet that is unaffected by the humid and aggressive environments found in this type of plant.
Sponsored
Nitric Acid Plant

Nitric Acid Plant

Eternit

Installation of Eternit Profile 6 painted sheeting and ventilation systems was carried out in Gunmetal Grey on the top half of the nitric acid plant and Blue on the bottom half by FP Services UK Ltd and in Blue on the centrifuge building by Cape Industrial Services.
Sponsored
Restoration of the foundations at a wind energy plant

Restoration of the foundations at a wind energy plant

Koster Aquatecnic Ltd

Concrete foundations of a wind energy plant: Due to the influences of the weather over the years, the following damages were noticed: •Cracks due to movement •Moisture into the structure •Spalling of the concrete •Corrosion of the reinforcement •Flaking paint The first step in the restoration of the foundation was pressure injecting the cracks - through which an elastic closure of the cracks was realized. The total surface was strengthened with a unique sillicate liquid. A waterproof sloped layer was installed; finally, the moving joint between the foundations and the steel tower of the wind energy plant was sealed elastically.
Sponsored
Plant Trellis – Green Park Station

Plant Trellis – Green Park Station

Lang+Fulton

Green Park Station provides access to the Jubilee, Piccadilly and Victoria Lines. The £60 million refurbishment to achieve step-free access included a copper canopy, a Portland stone entrance and a ramp from the ticket hall into the Park featuring green wall screening. Lang+Fulton designed and supplied 300sqm of panels to clad the raked inner facade of both retaining walls and the tapered wall-heads, which would support the green wall planting. The panels were made to custom sizes from Terra-34 grating and fixed with varying lengths of bracket to accommodate the stepped areas in the walls.
Sponsored
Automotive - Nissan Car Plant - Speedor Cleanroom

Automotive - Nissan Car Plant - Speedor Cleanroom

Hart Door Systems Ltd

Nissan Sunderland is one of the largest, most efficient car plants in Europe. On average, the plant has built a Nissan car every two minutes since production started.Project/doors:10 Speedor Cleanrooms (Over 200 doors supplied to the plant)The challengeFollowing the manufacture of a new paint plant where Hart have a number of doors including several ATEX, Nissan identified a requirement for new repair lines to enable them to carry out both light and heavy repairs and not have to completely repaint the vehicles. This is fast moving environment with the need for a reliable and dust reducing solution.The solutionUsing a tried and tested solution, Hart installed these “hybrid” Speedor Cleanrooms with ATEX operators within the repair zone. We worked closely with site engineers to give them the solution they require, rather than a door to fit an opening. The Speedor Cleanroom maintains strict air leakage requirements over specified pressure differentials and a non-touch safety light curtain which ensures maximum protection to personnel. The successHart is a trusted supplier to Nissan and its subcontractors. Having worked on the site since it’s inception, Nissan approached Hart to supply the doors. Following this Hart were approached by an OEM who provided a full spray booth, after Nissan insisted Hart Doors were specified due to the success of the earlier installations.The review“Speedor is a tried and tested product that is why we keep using them.” Nissan Motor Manufacturing UK Ltd
Sponsored
Durable, high strength, low permeability concrete for green energy plant

Durable, high strength, low permeability concrete for green energy plant

Tarmac

The Margam Green Energy Plant is a long-term, multi-million pound investment into the Welsh economy to help meet the country’s renewable energy targets whilst also strengthening the country’s energy security. A durable concrete was required for the storage silo that housed wood chip to feed the plant.For this project Tarmac suggested their TOPROC SY be used as an overlay on the finished concrete slab as a protective high strength screed. TOPROC SY comprises a micro-silica mix with steel and macro fibres designed to give high levels of abrasive and impact resistance. This product is highly suited to heavy industrial areas such as container handling, metal recycling, waste, loading bays and any other aggressive environments. The main benefit is extended length of time the product will perform compared with traditional concrete therefore saving cost on continual replacement.
Sponsored
Compounds, screening and perimeter security at Jaguar Land Rover' new plant

Compounds, screening and perimeter security at Jaguar Land Rover' new plant

Lang+Fulton

Jaguar Land Rover’s new £500 million engine manufacturing facility at the i54 business park is situated close to the M54 motorway outside Wolverhampton.The new plant, which is the size of 14 football pitches, is JLR’s largest investment for in-house engine design and manufacturing in a generation. As it was impractical to install a perimeter fence to provide adequate screening from the motorway, Lang+Fulton supplied 5 separate compounds with double and single leaf gates made from 400 linear metres of Italia-100 louvres:Waste Compound (2.4m high)Chiller Plant Compound (4m high)Data Centre Compound (3m high)Filter Mist Compound (4m high)Smoking Shelter (2m high)Finish: hot-dip galvanized & ppc RAL7016
Sponsored
Basement waterproofing at Ardley Energy from Waste Plant

Basement waterproofing at Ardley Energy from Waste Plant

Fosroc International Limited

The new Ardley EfW Plant, including a 12m basement built over an Artesian Well, presented a host of construction challenges. Due to the extreme water pressure created by the Artesian Well, as well as ammonium salts in the ground, Fosroc worked closely with Tata Projects specifying a solution using Proofex Engage to provide a watertight, chemically resistant barrier, with Supercast SW20 in the construction joints to reinforce the floor to wall joint. Fosroc provided a ‘total solution’ package to ensure Tata Projects could feel confident with the proposed specification, from basement waterproofing, to grouting crane bases, flooring and sealants.
Sponsored
LivePicture living plants artistry brings fresh air and well-being to Bristol office

LivePicture living plants artistry brings fresh air and well-being to Bristol office

Mobilane

A contemporary office environment demands a number of important considerations; functionality, aesthetics, space, accessibility and wellbeing.  Ticking all of these boxes are the multiple LivePicture installations at the headquarters of Ultraleap, a technology company in Bristol. A framed piece of artwork with living plants, LivePicture has brought foliage, freshness and visual impact to the offices, thanks to installers Inleaf.
Sponsored
FasTop RS69 polyurethane cement used for Bangladesh food production plant

FasTop RS69 polyurethane cement used for Bangladesh food production plant

Sherwin-Williams

  ​​​​​​​The FasTop RS69 polyurethane cement system was used for this ongoing Bangladesh food production plant project to deliver a heavy duty hygienic floor. Sherwin-Williams FasTop Multi RS69 product used in this system delivered a thickness of 6 mm overall and 9 mm in selected areas under machines where the floor would be subjected to boiling water. The initial area totalled 3500 sqm, and then further areas were done as the applicator worked through the factory. The project was the first time Quality Floors Bangladesh Ltd. team had taken advantage of the FasTop technology which featured extreme application conditions, including temperatures of 34-36oC, day and night, and also air humidity up to 100%.
Sponsored
APL Case Study -  StrongBak™ - Ball Corporation – New Bottling Plant

APL Case Study - StrongBak™ - Ball Corporation – New Bottling Plant

Architectural Profiles Ltd

Project: Ball Corporation – New Bottling Plant Year: 2020 Project Architect: CastleOwen Assembly:Roof – APL 65ZS aluminium standing seam twin-skin built-up system Walls – APL StrongBak™ with external vertical APL profiled cladding Size: • Approx 10,000 m² of roof & wall systems over 2 phases Special Features: • Building 14m high with limited site space • FM (Factory Mutual) approved non-combustible construction • 60/240 fire rating required plus special acoustic requirements Building Location: • Wakefield, Yorkshire
Sponsored
Water bottling plant - anti slip floor coating/ line marking paint

Water bottling plant - anti slip floor coating/ line marking paint

Watco UK Ltd

Our client, the world’s second largest producer of bottled water, was looking for industrial floor paints to renovate and maintain indoor walkways and create seamless traffic flows in its factories. And that’s no mean feat as the area to paint was over 2500 m2!"The objective of the refurbishment was to improve the visibility of the walkways in the production area to enhance employees’ safety."As the factory hadn’t been renovated for some years, floor markings were no longer visible and cracks were appearing throughout thus increasing the risk of trips and falls.In a food processing plant, there are strict environmental and safety regulations to comply with. It was therefore important that the paints and coatings used in the refurbishment conform to those regulations, but also have a rapid curing times to minimise downtime.Our client’s organisation relies heavily upon the dynamism of its teams. It was therefore only natural that employees themselves – from the accounting department to the technical teams - rolled up their sleeves and got on with the refurbishment project. The idea was to raise awareness of safety issues in the factory. For us, it meant we needed to supply user-friendly paints and coatings that could be applied easily by staff. Our solutionOur client researched various solutions and suppliers for their refurbishment project. Watco products, which are long lasting and user-friendly, stood out from the competition. Three products were applied: Safety Grip: A heavy duty anti slip, two pack epoxy resin coating designed for dangerous areas. Epoxyline: A heavy duty, fast drying, line marking paint. Epoxy Gloss Coat: An extremely tough floor coating that is virtually solvent free, and therefore ideal for a food processing plant.
Sponsored
FIREFLY Phoenix Picked To Protect Pharma Giant’s New Macclesfield Plant

FIREFLY Phoenix Picked To Protect Pharma Giant’s New Macclesfield Plant

FIREFLY™ TBA

A Manchester based passive fire protection specialist has utilised products from the range of FIREFLY – including the versatile Phoenix Smoke & Flame barriers – to achieve the compartmentation of concealed spaces within the new Macclesfield manufacturing facility of a world-leading pharmaceutical giant.Firetech UK Ltd. is a key sub-contractor to DES for the construction of the extensive new laboratories and production plant for AstraZeneca, part of the FTSE 100 company’s continuing investment at its East Cheshire site for the distribution of drugs to markets around the world. Firetech was established more than 25 years ago and makes extensive use of FIREFLY  flexible fire barriers for its work on both commercial and domestic contracts. In the case of the Macclesfield project, Firetech purchased the FIREFLY  products via national distributor, Encon.  The Contracts Manager for Firetech UK on the Macclesfield Project, Josh Dodds comments: “We work nationwide though predominantly in the North-West of the country and have been using FIREFLY  products for the past five years, including here on this very large new plant.  Early on in the contract we installed a large quantity of Titan Lite™ 120:60 fire barriers in the ‘Amenities Area’ of the building and then when we were tasked with installing a series of smoke and flame barriers in the ceiling voids over the laboratories, we proposed the Phoenix product as being the most cost-effective solution. The work consumed approximately 540 square metres of the Phoenix to create a series of vertical barriers valued at some £50K.  Although we were able to employ standard details for the installation of the Phoenix barriers  and the Collaroll which wraps some of the beams and other features, FIREFLY has been involved from the earliest stages, providing general guidance and carrying out inspections.  The project has gone very well.”FIREFLY Phoenix is a lightweight smoke and flame barrier which facilitates compartmentation within buildings to provide up to 120 minutes’ integrity under BS476 Parts 20 & 22.  Certified by IFCC, the flexible and straightforward to install material is suitable for both new-build and retrofit situations.  Manufactured from woven and non-woven glass, the FIREFLY range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios. The flexible barriers are easy to install horizontally or vertically using a full selection of ancillary products.  Used mainly in the construction industry across the UK and Europe, FIREFLY fire barriers help to contain fire, giving building occupants extra time to evacuate and the fire service to enter safely.Images shown are taken during installation and some sections of the installation might be incomplete.
Sponsored
Premier Loft Ladders provide a safe, convenient and discrete solution for access to a premium car dealership plant room

Premier Loft Ladders provide a safe, convenient and discrete solution for access to a premium car dealership plant room

Premier Loft Ladders Ltd

Premier Loft Ladders has helped Horizon Construction provide a safe and convenient access solution to a 1st floor plant room within a premium car showroom. What made this project particularly challenging was the 1.8m deep ceiling void. In addition, the access point was also in a prominent location outside the showroom offices. The solution was a bespoke Supreme heavy duty loft ladder. It offered a safe, discrete and easy-to-use solution for access to the car dealership plant room.Read the full case study...
Sponsored
Portavadie Marina Resort: Steel louvred fencing and compounds to screen service plant and wheelie bins

Portavadie Marina Resort: Steel louvred fencing and compounds to screen service plant and wheelie bins

Lang+Fulton

Lang+Fulton were asked to supply louvred screening to provide shelter and a visual barrier for the café and outdoor pool areas at the Portavadie Marina Resort. A 2.5m high screen of Italia-100 panels was installed to provide 100% visual screening. The louvres have a free area of 29%, which helps to reduce wind loading, but, in order to cope with potential storm force conditions, the RHS posts were specially designed in accordance with BS EN 1991-1-4. A store area for bins and a secure compound for service plant fored an additional part of the contract. The steel louvres were polyester powder coated in a muted grey (RAL 7015) to a marine grade standard of finish to blend with the surroundings and withstand the harsh coastal climate.
Sponsored
The Biggest Hydropower Stored Plant in Europe Trusts MSA for its Fall Protection

The Biggest Hydropower Stored Plant in Europe Trusts MSA for its Fall Protection

MSA Safety (Latchways) – Fall Protection

750 metres deep inside a Welsh mountain lies the biggest stored power plant in Europe. With its remote location and harsh operating environment, Engie First Hydro contacted the Latchways team at MSA Safety to provide the complete solution for all its operational and maintenance fall protection needs. 7 million cubic meters of water are pumped through the giant turbines to generate power and then reversed as pumps to return the water to the reservoir. This tough working environment presents unique safety challenges for the electrical & mechanical operational and maintenance teams when working at height.
Sponsored
US Homegrown Craft Beer Sensation, Brooklyn Brewery, Chooses Fresh Floor Finish for Williamsburg Plant Upgrades?

US Homegrown Craft Beer Sensation, Brooklyn Brewery, Chooses Fresh Floor Finish for Williamsburg Plant Upgrades?

Flowcrete – a brand of Tremco CPG UK Ltd

Bucking the trend for dairy brick, Brooklyn Brewery opted for close to 8,000 sq. ft. of urethane cement for major upgrade works to its manufacturing facility located at the former matzo plant where it has operated since 1996.
Sponsored
Living space as a power plant: Solar house

Living space as a power plant: Solar house

Hawa Sliding Solutions AG

The «Plus-Energie-Haus» constructed by the Technische Universität Darmstadt is a Solar Decathlon winner. The competition has been held each year since 2002 by the US Ministry for Energy. The task is to design and build a residential house to suit life that is self-sufficient with regard to energy. The houses must cover their entire energy requirements through self-produced solar power. Between two layers is a protected external area with sliding windows and folding slat shutters that can be opened and closed as needed. The folding sliding shutters are equipped with HAWA Variofold 80 H.
Sponsored
Upgrading physical perimeter security using 358 mesh, access control measures and crash rated systems for a water treatment plant

Upgrading physical perimeter security using 358 mesh, access control measures and crash rated systems for a water treatment plant

Jacksons Fencing

Following the brief outlined by the water treatment plant the proposal adopted for implementation was for the creation of secure access control. Bi-Folding Speed Gates topped with razor wire were supplied to each of the main entry and exit points to the site. These were supported by PAS 68 rising bollards and rising arm barriers with synchronised operation and traffic light signalling. The gates and barriers were flanked by runs of Jacksons Securi-Mesh® fencing to provide a separate pedestrian entrance to the facility, while static PAS 68 rated bollards were additionally deployed to manage traffic within the site.
Sponsored
AKRI provides attractive planting solution in new public space

AKRI provides attractive planting solution in new public space

Furnitubes International Ltd

Furnitubes provisioned a number of AKRI raised planter beds for the scheme, the flexibility of the product permitted the creation of a unique stepped solution that was required at specific intervals in the planter to allow for the various changes in levels. A total of 26 meters of AKRI retaining walls were provided in heights of 670mm to accommodate the stepped solution, each planter comprising two internal soil retaining supports to provide increased strength to retain the contents. A return fold with additional anti-skates outlined the rim of the planters to maximise strength and not form a potential harmful edge.
Sponsored
James Jones picks EGGER Protect for latest processing plant

James Jones picks EGGER Protect for latest processing plant

EGGER (UK) Ltd

Leading timber processor, James Jones & Sons Ltd, specified EGGER Protect at its new facility near Lockerbie. The 18 acre Hangingshaw development is a strategic investment for the company, and EGGER Protect contributes to its successful implementation. EGGER Protect flooring was installed on all of the high-level walkways and access platforms around the advanced production machines. This application brings health and safety benefits, with the textured surface of the board offering market-leading anti-slip characteristics.The product is durable, easy to install and keep clean.
Sponsored
Equinor Snøhvit - Chartek 7 - LNG (Liquefied Natural Gas) Plant & Export Terminal

Equinor Snøhvit - Chartek 7 - LNG (Liquefied Natural Gas) Plant & Export Terminal

International®, brand of AkzoNobel

Chartek 7 was specified for this project, as an epoxy intumescent coating with an outstanding track record of protection against hydrocarbon fires dating back to 1995. The PFP system had to be able withstand explosion loads in excess for 4bar while maintaining its integrity, and Chartek 7 easily met these requirements. Using Chartek also provided productivity benefits, due to its high build and simple meshing system, along with a low weight per unit area, helping to reduce transportation costs for pre-fabricated units.Pre-fabrication played an important role in this project, due to the harsh environmental conditions and remoteness of the site. Steel components were constructed at locations across Europe, with the emphasis on minimizing installation and delivery costs. The ability of AkzoNobel to provide standardized global products and a high level of technical support helped to streamline and add value to this process, complementing the productivity benefits of Chartek.
Sponsored
National Grid Isle of Grain Power Station Case Study

National Grid Isle of Grain Power Station Case Study

Marsh Industries Ltd

The National Grid Site on the Isle of Grain is a very sensitive environmental area, from the site liquefied pressurised gas and electricity is distributed to the Southern UK, France and Belgium. Site required a sewage plant able to treat raw sewage to 15:15:10 standard. Due to the high water table, plant had to be installed above ground. Discharge from the sewage plant was directly into the Thames/Medway estuary. The Marsh UP was installed replacing the existing sewage plant that failed consent standards. The plant has performed better than the 15:15:10 standard set by the EA.
Sponsored
Go for O2

Go for O2

Mobilane

With LivePicture GO you can add a splash of vertical greenery in a playful way to your living, learning or working environment. You don’t even have to have “green fingers” for the care of the plants; the water detector indicates when the reservoir needs refilling. The water supply within the tank is sufficient to provide the plants with water for ± 4 weeks. The capillary action within the plant cassette provides the plants with just the right amount of water they need.
Sponsored
Cannon Park Car Park Living Wall

Cannon Park Car Park Living Wall

Biotecture Limited

Biotecture worked with architects, Urban Innovations, to design and deliver 690m2 of living wall on a multi-story car park in Coventry. The introduction of this expansive living wall helped to satisfy planning concerns and creates a striking feature on what might have otherwise been a blank wall. The living walls at Cannon Park feature a bold planting design creating a three-dimensional ‘wave’ or ‘drift’ aesthetic that will become more prominent as the plants mature. The design highlights Biotecture’s ability to match plant choice and design to client requirements.
Sponsored
Living Walls at the ‘The Sky Terrace’ Landmark Pinnacle

Living Walls at the ‘The Sky Terrace’ Landmark Pinnacle

Biotecture Limited

Soaring 75 floors above the city, the breath-taking Sky Terrace spans the top floor of the Landmark Pinnacle building.Chalegrove Properties, the developer of Landmark Pinnacle, working with Squire and Partners and Farrer Huxley Landscape Architects had a collective vision to create a unique space befitting of the exceptional views which surround the roof garden. The space has been designed as a pair of landscaped external terraces providing spectacular panoramic views over London, while offering a healthy environment embracing biophilia to ensure residents can connect with nature in an otherwise urban setting.Biotecture’s living walls create lush green backdrops for both the east and west terraces. The green walls are constructed using Biotecture’s patented hydroponic living wall system, which was developed by the founders of the company in 2007 and remains the most flexible, resilient, and low water use of any fully comprehensive living wall system anywhere in the world.Living walls are a space efficient way to bring more plants into urban areas where space is literally and financially at a premium. Bringing more greenery into urban spaces can help reduce stress and anxiety, and together with the wider planting scheme, the living walls form the backdrop for a tranquil and relaxing place for residents and their guests to unwind. Living walls have also been proven to improve air quality, cool urban areas, and increase biodiversity.The lighting scheme was designed by Hoare Lee to bring the wall to life in the evening.Design and Project ManagementBiotecture were first approached by Charlgrove Properties in 2020. Squire and Partners and Farrer Huxley Landscape Architects had a clear vision for what they wanted. Our design and project management team were able to take the project forward, advising on technical requirements and producing drawings.Selection of Plant PalletteAll plants used in Biotecture’s living walls are selected from Biotecture’s plant database to suit the local climatic conditions, including aspect, wind conditions and shade. Level 75 is the UK’s highest living wall, and the roof terrace is open to the elements. The plants were selected to withstand high exposure to sunlight and wind.The plant selection is mainly hardy and robust evergreen plants with dashes of colour creating a naturalistic background overlaid with bursts of seasonal interest.HorticultureOur BioPanel system incorporates Grodan as a growing medium. It is dimensionally stable, chemically inert, and supremely water efficient making it ideal for living walls. The living walls were planted up in our West Sussex Nursery and allowed to mature for 12 weeks before being installed on site. This ensured the living walls looked fantastic from day one. The living walls include an integrated irrigation system which is being remotely monitored from Biotecture’s head office.InstallationThe fully planted up BioPanels were fixed to aluminum cladding rails mounted onto a waterproof backing board. The team worked closely with Chalegrove to ensure the living walls were delivered to the required schedule.MaintenanceOur living wall system gives the plants the best opportunity to flourish, and our maintenance operatives know how to keep them that way. Our team will carry out regular horticultural visits to keep the walls looking their best.Photos by Oliver Dixon, courtesy of Chalegrove Properties
Sponsored
Canberra House

Canberra House

Bauder Ltd

Canberra HouseBauder Cold Applied LiquiTOP SystemSynopsisCanberra House is an office facility in Swindon. The existing single ply PVC waterproofing system roof was leaking and so Bauder carried out a full site survey. The resultant report gave the client several options to rectify the leaking roof.Bauder Building BoardProject nameCanberra HouseLocationSwindonProject typeRefurbishmentRoof size985m²SpecifierRapleys LLP (Bristol)Approved contractorCentral Roofing & Building Services LimitedThe specificationThe LiquiTOP system was chosen as it can be applied directly to the prepared and primed existing single ply covering. The liquid system allowed us to get into tight spaces and without the need for any hot works.LiquiTOP is excellent on refurbishment projects where the complexity of the roof involves intricate areas to be detailed that are not easily achieved with a sheet membrane, or the actual working space on the roof is constricted.Project challengesLarge areas of plant and machinery were situated just above the roof level making access to the areas below difficult with the plant in-situ. The available budget on this project did not allow for lifting or removing the plant, stripping the existing waterproofing system, and replacing with new. Therefore, the decision was made to overlay the existing single ply membrane with a cold applied liquid waterproofing which can be installed without the need to raise any plant.To overcome drainage challenges, secondary upstands were created under the plant and fabricated channels placed underneath allowing water to flow through to the drainage points.The resultBauder was able to offer a cost-effective solution without the necessity to remove or decommission the roof mounted plant and machinery. Cost reductions were achieved for the client by overlaying the existing roof, negating any need to strip existing materials, and not having to remove or raise the plant.The works were carried out by Central Roofing who manged the project impeccably and also finished ahead of schedule.System installedBauder Cold Applied LiquiTOP System1 LiquiTOP PU cold applied liquidA moisture triggered curing polyurethane waterproofing resin; applied in 2 coats, reinforced with Bauder LiquiTOP Glass Fibre Mat.
Sponsored
Light and bright at Amazon Hub Bristol

Light and bright at Amazon Hub Bristol

Mobilane

Plants bring a new dimension to an otherwise dull and lacklustre indoor environment. Desk, shelf and window space does not always allow for houseplants though – but that should never limit the options – there’s the wall space too! Leaf colour, floral interest – plants can bring warmth,visual impact and a welcoming backdrop for employees and visitors in the form of a LivePicture living art wall frame. LivePicture adds nature to any office.
Sponsored
Loch Insh Water Sports Centre

Loch Insh Water Sports Centre

Kingspan Klargester

Kingspan Klargester bespoke Commercial Treatment Plant installed in the foothills of the Cairngorm Mountains.
Sponsored
Glenmorangie Distillery Tain

Glenmorangie Distillery Tain

Kingspan Klargester

Kingspan Klargester bespoke Commercial Treatment Plant installed by the tranquil shores of Dornoch Firth.
Sponsored
St Modwen Park, Newport

St Modwen Park, Newport

urbanspec

urbanspec Bike-S Bike Modules, E-Series Enclosure System, Bespoke Plant Screen
Sponsored
Biomass Access Cover - Lithuania

Biomass Access Cover - Lithuania

Surespan

Surespan recently travelled to Lithuania to manufacture and supply a floor hatch to enable Finnish energy company Fortum to access their biomass pit at their new energy plant.The 5000 x 5000 mm hydraulically operated, the double-leaf hatch was designed to be easily operated by an electrically driven pump power pack. Fortum wanted the simplest operation for a grab crane to gain easy access to the biomass plant so Surespan worked with engineering consultants AF Consult to come up with an effective solution.
Sponsored
Teesside University, Middlesbrough

Teesside University, Middlesbrough

Broxap Ltd

A modern new entrance area includes seating, planting and shelter for students, staff and visitors at Teesside University.
Sponsored
Don’t let CUI ruin your investment

Don’t let CUI ruin your investment

Hempel A/S

Owned by Shaanxi Tianhong Silicon Materials Co. Ltd., the Shaanxi Yousr Polysilicon Plant in China will produce polycrystalline silicon material for the solar photovoltaic and electronics industries. When engineering company Fluor was asked to design the plant, it was faced with a specific challenge.Much of the plant’s pipework and equipment is exposed to high temperatures, making it prone to corrosion under insulation. Fluor knew that conventional anti-corrosive solutions are often not able to protect equipment in these conditions, and the company was looking for an alternative but reliable and proven coating solution.Fluor chose our Versiline CUI 56990 coating to provide long-term protection for pipework, equipment and other hot surfaces. Versiline CUI 56990 can resist temperatures up to 650°C/1202°F and thermal shock and cycling in dry or wet service conditions. Versiline CUI 56990 is extremely resistant to micro-cracking and corrosion, even in tough operating conditions.
Sponsored
Cranswick Country Foods

Cranswick Country Foods

ASPEN by Canal Engineering Limited

Aspen Stainless supplied bespoke stainless-steel solutions to the UK’s leading food producer Cranswick. Aspen worked closely with Trundley Design to design effective hygienic plant equipment for a number of food processing plants across the UK.The drainage system was installed to support the cleaning regime and water flow around the factory. This blended perfectly with the John Lord flooring design and allowed for waste to drain effectively into the surrounding channels and gullies; creating a seamless connection between the systems and prevented any standing waste and bacteria from building up.
Sponsored
Blaise Castle - Advanced Paving

Blaise Castle - Advanced Paving

CEMEX UK

Utilising our Advanced Paving mix, Cemex were able to save our customer time and money whilst meeting their construction needs. Cemex were approached by our customer to find a solution for an external concreted area to upgrade and extend the grounds at Blaise Castle Plant Nursey. The Nursery has enjoyed great success in producing over 2.5 million plants per year for local authorities and required the additional ground space to meet their continually growing demands. Please refer to the attached case study file for further information.

Showing 1-36 of 258

Feedback