"internal walls partitions"

When HSP Architects and Price & Myers wanted to transform a listed commercial basement in Temple Fortune to create a new community centre, they needed to look no further than Newton Specialist Contractor Arti Construction to perform the waterproofing.ning three of the walls were either fully or partially below-ground and suffering from water penetration. Arti recommended the Newton CDM System, as it is the most safe and reliable form of waterproofing that would deliver a completely dry internal space and cause the minimal amount of disruption to the Listed structure.The basement, part of a four-storey Listed building, was built into a hillside, meaning that three of the walls were either fully or partially below-ground and suffering from water penetration. Arti Construction worked with the design team at an early stage to design a waterproofing solution.With existing Listed basements such as this one, Arti Construction were quick to recommend a Type C cavity drain waterproofing solution in the form of the Newton CDM System. Type C waterproofing is the safest and most reliable form of waterproofing that will deliver a completely dry internal space, whilst also causing the minimum amount of disruption to the Listed structure.Before Arti could proceed with the installation, they first had to re-level the existing concrete slab in order to provide a flat and stable floor.With the structure fully prepared, Arti could then proceed with installing a full cavity drain waterproofing system. This consisted of installing Newton 508 with minimal MultiPlug fixings to the walls and floors to capture the ingressing water. The water is then directed via Newton Basedrain channels to a Titan-Pro sump chamber, for removal by dual NP400 clean water pumps.The complex basement space included existing columns, windows and an internal staircase which all had to be factored into the waterproofing design.Regardless of this, Arti Construction completed the 280m2 installation within budget in just one week, delivering a reliable Type C structural waterproofing system that is also compliant with British Standard 8102:2009.

High-end residential refurbishment that required MicroCement installation to all internal walls and floors in two family bathrooms. This large scale, refurbishment project showcased innovative ways MicroCement can be applied to interior bathroom walls and floors without a need for joins or breaks. Its smooth finish was ideal for a modern, minimalist design that our client wanted. MicroCement can be easily installed over existing materials which in turn reduces the time needed for application and maintenance.We also supplied and installed two large precast and hand-polished concrete washbasins that were done in Mist Silk finish. They were treated with our in-house sealant and made to be stain-resistant.

British clothing company, Boden, found the perfect location in Leicester, to expand their warehouse and contact centre.With a fashionable interior at the forefront of architect, Spacelab’s, mind, LOFT20 provided the ideal solution. A fantastic alternative to slim framed office partitioning, LOFT20 was used throughout the interior, from meeting rooms, to the break-out spaces.Where fire rated partitioning screens and doors were needed, FireClear was the obvious solution, being fully compatible with LOFT20. Achieving E30 fire rating, FireClear had mullions and transoms applied, in the same width and colour as LOFT20, to provide seamless integration throughout the design.

Seveme’s expertise in metal structure works combined with Pyroguard’s multi-functional range of toughened fire safety glass, Pyroguard Protect, enabled the build of the new Algeria Gulf Bank headquarters. Through the informed specification of additional counterpanes, the curtain wall of this futuristic building was able to achieve an EI120 fire rating, as well as effective solar control. Meanwhile in the internal lobby, where safety and style were key, a unique composition that combined both requirements was used.

The Lucent Development creates balance that boosts productivity and wellbeing.Lucent W1 is quite literally built around nature, with a tree towering in the central atrium and an internal green wall that stretches the full height of the world-famous external lights. The innovative Fletcher Priest design has created offices that are cocooned away from the surrounding city, while 20 terraces allow panoramic views across the capital.For this design, Selo used the Quarda Riser Door which are the most high-performance metal riser doorsets. Perfect for concealing fire-rated riser doors, access panels, and internal doors in corridors, landings, and other access areas; Quadra+ is supplied as an integral, four-sided frame and door system, pre-constructed to form a single robust unit. Ideal for hidden commercial access solutions, Quadra+ is designed and manufactured to the highest standards.

For the basement laboratories, Planet used p100 demountable double-glazed full-height partitions with two layers of 15mm toughened glass to reach heights in excess of three metres. The partitioning framework was set within the steel grid structure, ensuring an industrial look and incorporating slimline single-glazed and SonoTec double glazed doors with integrated venetian blinds. Planet provided a full blackout option for lab work on sensitive ancient human remains. Planet AG was responsible for the full-height atrium glazing, using 19.5mm toughened laminated glass. It required carefully spaced holes for securing attenuators that control airflow within the building.

Sheffield Hallam University’s new three-floor, purpose-built teaching facility, the Heart of the Campus Building, is another eye-catching addition to this burgeoning northern university. Planet Partitioning used p100 double glazing to glaze around 50 room frontages, including seminar and study rooms, installing IsoClear single glass doors throughout to ensure excellent acoustic performance. This involved using a minimum framework to help create a modern, contemporary look and feel. Planet Partitioning also installed large angular atrium glass screens on the top floor of the communal area to form an impressive 50-metre long ‘U’ shape.

International bathroom experts Villeroy & Boch have been commissioned by Hotel La Tour, Birmingham to remodel all of their en-suites and public wash-rooms. Working with pHp Architects and interior design Adrian Coleman, Villeroy & Boch have updated the 4* hotel with sleek wall-hung sanitaryware and contemporary surface mounted basins; choosing pieces from their Loop & Friends, Momento, Squaro and Subway collections. In total 550 pieces were installed, completing 174 bathrooms in the hotel.

The ChallengeSimon Balle School asked BrookhouseUK to help them create two new Unisex washrooms in their Block 1 and Block 2 Sixth Form areas of the school.The aim was to create open plan washroom spaces but with two sides to them by creating a partial height wall separating the two sides. As the layouts were completely changing and structural work needed to take place, this was a challenging undertaking.Full height IPS cubicles were required with separate vents in each along with new hand washing facilities. Simon Balle School were fully committed to investing in these new modern toilet blocks which future-proofed them for generations to come. They also did not want to wait until the next summer holidays to complete the work.The SolutionBrookhouseUK, having created a strict methodology for term time work, were able to refurbish both washrooms during term-time. We created a design which included demolishing the central dividing wall and installing new half-height partition walls using timber studs and hygiene wall cladding.Two new modern solid surface wash troughs sat on each side of the new walls which included automatic taps and automatic soap dispensers, vastly improving the facilities. Oak effect doors with contrasting dark IPS panels gave the washrooms a fresh, updated look.New automatic dryers were installed to complete the modernisation. Simon Balle School were delighted with the results and have happily recommended BrookhouseUK to other schools. We Provided:Full Height IPSUnisex DesignsContrasting Colour Doors and PanelsAutomatic Taps and Soap DispensersHygienic Hand-DryersModern Solid Surface Trough

When the Duty-Free Retail Area of the airport was recently refurbished, the design incorporated large sweeping curves on plan which also incorporated the shopfronts. The demise line of the shopfronts also entailed that they needed the facility to be closed off outside trading hours from a security point of view in addition to each unit being an individual fire compartment. Bolton Gate’s Contour shutters were specified which operate laterally and coil into a box at one end - this innovative product can describe an infinite number of bends and curves whilst closing off openings up to 100 metres wide.

The $10-billion dollar development required a rooftop waterproofing and flooring system that could withstand the islands continual exposure to heat, moisture and sunlight. ARDEX provided the perfect system to cope with such an extreme environment.

Radii joined this fit out in late 2023, where we worked on the design, supply and install of of a tailored glazed partition package for 28 office and meeting rooms.On Level 2, our team designed and installed a stunning Glide framed glazed screen into quad telescopic track between the reception and adjoining communal area.Large meeting rooms on Levels 2 and 4 comprised Parallel 100 (Rw 50 dB) double glazed partitions with red and blue framework respectively; Parallel 100 and single glazed Linear 30 variation screens with bronze and grey frames were utilised elsewhere in the space depending on acoustic requirements. All aluminium was finished in Radii’s dedicated in-house PPC line, with the bronze finish also used on aluminium faced tech panels. Partitions were accompanied by 64mm timber veneered acoustic doors (Rw 41 dB) and double glazed pivoting Hogan doors (Rw 39 dB).Finally, Radii’s own high-performing FirePro steel-clad fire rated screens rated at E60 were installed on all three levels.

Located in Brixton, The Department Store Studios is a five-storey contemporary office building, offering flexible co-working space alongside generous amenities including a bike storage, showers, lockers, a screening room and a bar and restaurant. The workspace has been designed and built by renowned architecture firm Squire and Partners, to be used as an addition to its own London office, in a new build property framed by cross-laminated timber. Early involvement with brickwork contractor, Lyons & Annoot, allowed for a seamless, homogenous brick build on this project. Working alongside main contractor Lyons and Annoot, from tender stage to completion, Leviat designed and manufactured a bespoke masonry restraint system which was used in the internal blockwork walls, as well as Ancon Wall Ties, Head Restraints and AMR Masonry Reinforcement in the façade.

This new Multi-Brand Dealership is comprised of three showrooms for the three prestige automotive brands, Jaguar Land Rover, Aston Martin and McLaren and has been built in Hatfield Business Park, Shropshire by the award winning MCS Group. Each of the showrooms have been designed to allow freedom to explore the range of vehicles in a contemporary environment that is both luxurious and inviting. The Aston Martin and McLaren showrooms are also the first in the UK to showcase the newest corporate identities for the brands.The Jaguar Land Rover £15 million showroom is both light and spacious. It provides 18 vehicle display spaces and dedicated vehicle handover suites. There is also a drive-in service area, valet and preparation area. The Lusso 25 single glazed frameless glazed partition system was installed to create office spaces which allows uninterrupted visibility to the showroom. McLaren has a history of exceptional design and engineering, so it is not surprising that the design for the showroom includes a feature curved glazed partitioning system with curved glass sliding doors. Lusso rose to this challenge and bravely executed the complex design requirements. With this statement partitioning, the showroom becomes a be-fitting space for the stunning range of McLaren supercars, providing the customer with an unforgettable shopping experience. As a prestigious brand, Aston Martin is well-known around the world for being a car manufacturer that produces vehicles that turn heads. Their stylish new showroom has been designed to provide a luxurious backdrop for their stunning supercars.The development of the facility has created a bespoke environment with a dedicated customer specification lounge, private handover area and aftersales facilities.With the use of Lusso Glazed Partitioning System, the bespoke showroom has been given a sleek look which was required for this brand.Image - 8

The Project Perton First School has been open for over 40 years and the infant washroom facilities are in need of modernisation.The school prides itself its family ethos and has seen generations of families come the doors.The ChallengePropose a system with children of nursery age in mind. Consider the height of the doors & partitions.Peardrop range is not supported by an overhead rail and the frontage is fixed at the floor and gable walls only.Flooring substate needs to be at lease 60mm thick and stable to ensure a secure fixing point at the base of the foot.Deliver a non-standard laminate to enhance the systems aesthetics. The SolutionExcelsior, working alongside G Evans and Entrust, are excited to have installed our Harlequin Select Range at Perton First School. The school chose our Peardrop Range with low level accessible doors and magnetic locks, perfect for the classroom environment. The cubicles doors were finished in our vibrant Lolly Pop Digital Print & the area was surveyed to ensure suitable fixing points.Harlequin Peardrop is the ideal system for children of nursery age, the system is self-supporting on an aluminium leg; the legs ability to perform is reliant of the strength of the floor substrate which in this case proved suitable, enabling the client to proceed with this infant friendly system.The full system is professionally manufactured with children in mind providing easily accessible doors for children whilst ensuring efficient dimensions for adults to supervise.SpecificationProduct Range: Harlequin Select HPLDoors: 18mm High Pressure Laminate, Lolly Pop Digital PrintPilaster: Polyrey C018 ChardonPartition: 18mm High Pressure Laminate, Polyrey C018 ChardonIronmongery: SBAA 

PROJECT OVERVIEWOrthoplastics is a global leader in the development and manufacture of orthopaedic implants and components, helping surgeons transform lives around the world. This project, the first phase of a fit out programme for a new facility in Bacup, Lancashire, involved the delivery a new cGMP advanced manufacturing area for the production of Ultra High Molecular Weight Polyethylene (UHMWPE) sheets used in the manufacture of orthopaedic implants. The requirement was for a production area that can provide a controlled environment, isolated from the rest of the floorplate, during processing periods, while enabling access by a remote controlled mobile crane to remove the completed UHMWPE sheets when the equipment is non-operational.PROJECT SPECThe new Orthoplastics building is a single storey facility and the size and weight of the UHMWPE equipment required excavation of additional space below ground to accommodate both the machine and the building services required to process materials at up to 2400C. The 1000m2 processing area needs to be a cleanable cGMP compliant environment to avoid the risk of contaminants in materials that will be used in orthopaedic surgery. The partitioning for the perimeter is 11m tall and connected to the ceiling of the existing building shell. To provide the structural stability required for such tall walls, the standard Norwood 100mm Mediline partition thickness has been increased to 200mm. The project also included rapid rise doors for access by the remote control crane that removes the large UHMWPE sheets following the process. The fully demountable double skin bi-panel system enabled a fast and robust installation enabling the project to get back on track quickly following interruption by the pandemic. The panels were prefabricated in-house by Norwood, enabling a fast-track installation programme.Norwood was also designed, manufactured and installed a range of their single and double steel doors in blue.

A Rundum Original side sliding garage door has enabled a client in Yorkshire to apply a non-standard shape to their new garage to maximise the footprint and provide the largest area of usable internal space with easy vehicular access. The angle of the boundary of the Victorian house presented an opportunity during a refurbishment project to remodel the garage. By aligning the front elevation of the garage with the house, vehicular access could be improved. The design required a door that could comfortably handle a right angle corner followed by an obtuse angle along the garage's side wall.

Award-winning Interdisciplinary Biomedical Research Building (IBRB, £33m) at University of Warwick is a new state-of-the-art research building. Location: WarwickAspex supplied: Aspex supplied Salto access control products including:XS4 ONE BLE escutcheons internally and externallySalto wall readersHigh security locking in confidential areasSmart lock automationSalto readers concealed within turnstile speed gates Contractor: Willmott DixonArchitect: Hawkins Brown Architects & Fairhurst Design Group

The Woodlands is a housing scheme from Willmark Homes that consists of eight beautiful six-bedroom detached properties. With an enviable reputation for building quality homes across the East Midlands, Willmark Homes wanted to ensure that this scheme was designed and built to the high standard of existing projects both internally and externally. The developer faced issues with the external areas at The Woodlands due to the sloping site conditions. Tobermore solved the problem quickly and efficiently with the provision of Secura Grand – a mortar-free retaining wall product with an attractive, aged finish.

As part of the airport’s massive first-phase transformation, Bobrick DuraLineSeries toilet partitions delivered the perfect balance of design, privacy and durability — and an abundance of economical Bobrick accessories delivered robust engineering and built-in maintainability.

The Problem:Associated problems caused by damp and flooding are commonplace throughout the UK’s housing stock. Growth of black mould and efflorescence caused by salt transfer can lead to thedelamination of the plaster and there is no simple resolution. Often the only choice left to the housing association or local authority is to remove the original plaster and treat the walls with a Damp Proof Course (DPC), before waiting for it to dry to receive a backing plaster – all at the expense of the landlord or local authority.The Solution: A Modern, Lightweight Renovating Plaster:Limelite Renovating Plaster solves all of these problems. Firstly, it can be applied to damp walls, saving an enormous amount of money for time that would be otherwise spent waiting for the walls to dry out – it effectively controls dampness passing through walls, as well as providing a barrier against salt transfer – ultimately allowing the substrate to dry naturally. Secondly, and crucially, Limelite Renovating Plaster will withstand damp issues caused by future events, which may be likely in properties susceptible to damp and flooding.Thirdly the Limelite plaster system offers Thermal Insulation by drying the walls rapidly, reducing loss of heat and insulating the internal walls to meet modern day standardsThermal Conductivity, λ10,dry,mat, P=50% = 0.17W/m.KThermal Conductivity (k) at 0% moisture = 0.13W/m.KAnother benefit with Limelite plasters for internal use is their fire resistance/protection as a non-combustible product (as defined by BS476:Part 4) which can be assigned Class O in accordance with the requirements of the National Building Regulations and Reaction to Fire = Euroclass A1 Making the Difference for Local Authorities Dudley Council in the West Midlands is among the many local authorities that specify the use of Limelite Renovating Plaster when tackling such issues in social housing.“Where a renovating plaster is required we use the original and proven, Limelite” said Andy Pratt, Specification and Design Manager for Dudley Council, which has been specified by the council for over 40 years.Where existing plaster is sound, a small area of plaster is removed and replaced with Limelite.In more severe cases where the existing plaster is unsound, all plaster is removed and the wall is treated with a DPC before Limelite Renovating Plaster is applied. Limelite Renovating Plaster is also used for patch repairs in areas such as window reveals, where again the damaged plaster is removed and replaced with Limelite.A BBA Approved SystemLimelite Renovating Plaster is a BBA approved solution, when used as the backing plaster in a 2-part system, finished with our High Impact Finishing Plaster - a hard, durable finishing plaster that produces a Grade D impact resistant surface.

The Project  Friargate One is a 150,000 sq ft, 13 storey, low energy building forming part of a £700m project to create a new business district in Coventry.  The building sets the standard for the remainder of the 37 acre Friargate scheme that will include 13 more office buildings, two hotels, homes and shops all set to transform the area around the train station. This project is the largest development in the West Midlands Combined Authority.   The Challenge Deliver a product to satisfy the architects design & meet the highest standards offered within the industry. Provide a full range of accessories to compliment the system. Manufacture bespoke boxed out mirror units complete with rebated lighting strip. Ensure the system is installed to highest standard to create a seamless fronted wall of cubicles and superloos across varying floors.  The Solution Floor to ceiling Flush 44 system installed throughout male & female washrooms and unisex superloos situated over two floors.   The system encompasses a 44mm MR core with a hardwood rebated edge detail. The overall finish is modern and sleek creating a seamless flush wall of cubicles with complete privacy and comfort for the users.Close management of each phase from site survey through CAD drawings, call up and manufacture ensured we had complete control of the project and were able to accurately survey the areas and install the seamless system desired by the client.SpecificationProduct Range: Flush44 HPLDoors: HPL Bonded onto 44mm MR Core, Formica Graphite F7837. Hardwood rebated edgesPilaster: HPL Bonded onto 44mm MR Core, Formica Graphite F7837. Hardwood rebated edgesPartition: Partition: HPL bonded onto 38mm MR Core, Formica Folkstone F7927Ironmongery: Stainless SteelAvailable Finishes:These Systems Are Available In The Following Finishes:• Natural Wood Veneer• High Pressure Laminate• High Gloss LaminateAccessories Product Range W/C'sSpecificationProduct Range: AccessoriesMirror Backing Panels: Blanc Menuires B015 with 4mm Safety Backed MirrorsWaste Bins: Prestige Waste BinOther:Paper Towel HoldersWaste BinToilet Roll HoldersSoap Dispenser

DWB Hull, a licensed MiTek roof truss and Posi-Joist manufacturer, recently supplied specially designed Posi-Rafters to form the roof for a large domestic extension. Bespoke end details were incorporated into the Posi-Rafter design to make installation straightforward and to provide solid bearings on to the steel beams and walls. The build had two steel ridge purlins and a central steel at ceiling level, forming a large vaulted ceiling internally. Posi-Rafters were the ideal choice, with plated end blocks sitting directly on to the steel beams with no need for hangers.

Vtec's SupaSlat and Supaline panels were key design elements in this high specification, luxury residential development in London. The foyer area showcases BESPOKE TIMBER BATTEN WALLS and a unique FEATURE STAIRCASE, whilst the post room is crowned with an impressive SUPASLAT RAFT. Vtec were specified due to the intricate detailing, integrations, complex interfaces and technical nature of this residential project. We supported the designer, an industry-leading international architect and contractor, throughout the design stage and development process through to installation, overcoming some particularly challenging programme requirements.

Our coatings look after the world’s most iconic and acclaimed buildings. Among them is the Auckland Art Gallery Toi o Tāmaki. Since its redevelopment in 2011, the principal public gallery in Auckland, New Zealand has won 23 awards and counting, including the prestigious World Architecture Festival's 2013 World Building of the Year. The redevelopment plan aimed at restoring and preserving heritage elements and sensitively combining them with 21st-century design. This included earthquake-proofing and heritage restoration of the 1887 and 1916 components of the main building and the addition of new, contemporary elements that increased display space by 50 per cent. One of the most distinctive features of the new building is its roof design, which forms a series of fine ‘tree-like’ canopies that define and cover the forecourt, atrium and gallery areas.Our coatings complemented this architectural challenge of blending old with new. A coatings system comprising of Interzinc 42, Intergard 251 and Interthane 990 was used to protect structural steel, while Interchar 963 was used to provide essential protection from the effects of fire.

A new state-of-the-art business incubation building in Dorset has been completed with the use of an integrated package of Sto thermal insulation and external render and paint products. The company’s StoTherm Vario and StoTherm Classic insulation systems were specified for the new Innovation Studio at the Arts University Bournemouth, along with StoSilco exterior render and StoColor Dryonic façade paint.

The high-performing FirePro fire rated system — fully developed by Radii’s in-house product development Centre for Excellence — was a key feature in the fit-out for global asset managers Blackstone in London’s Berkeley Square.Working on Level 3 of the building, fire rated solutions comprised FirePro Ei30 glazed fire screens, five FirePro Ei30 single doors and double door sets respectively, and three Firepro Ei60 double door sets. Fire doors were installed with power-assisted openers.Furthermore, our high acoustic performance Linear 50 Plus single glazed partitions (up to Rw 41 dB) and a single glazed Hogan lobby double door set with access control completed the glazed partition package.

Radii manufactured and installed Parallel 50 double glazed partitioning (45dB Rw) with adjoining Parallel 100 (50dB RW) for TS&W’s glazed fronts on the Ground floor and Level 1, including a number of stunning curved glazed elements. Linear 25 single glazed partitions (38dB RW) were used on Levels 2 to 5.Enhanced acoustic timber doors (40dB Rw) in veneered and painted finishes and with adjoining timber pilasters were utilised for the executive meeting rooms and offices.Auto-operated framed glazed pivoting doors, with visible overhead operators mounted on our top channels, were also installed to give easy access to ‘den’ and collaboration areas.Finally, a fire rated package comprising of structural Ei90 fire rated glazed screens was added on Level 5.

We were happy to work with KKS and ISG on the design and creation of these new spaces. A range of glass partitions for agile working achieved a stunning interior, fit for purpose. Also the design created a BREEAM excellent rating proving it’s sustainability credentials.

At Coverys new headquarters, a stunning array of design elements make this fit-out an undeniable success. Employees work in peace and quiet whenever needed due to the acoustic laminated glass in the Revolution 54 Plus partitions and Edge Affinity doors.

The Pyramids Centre in Portsmouth has had a new lease of life with a £2.5m makeover. The ageing facility is now a modern leisure complex offering a fun attraction to the local families. The new facilities include a state-of-the-art gym, trampoline, and soft play park.Helmsman was sub-contracted to supply the lockers and cubicles package providing a turnkey solution to create a modern and sharp changing room area with a comfortable feel.For the Pyramids Centre leisure project we manufactured, delivered, and installed modern laminate lockers of 3 and 5 doors. They are heavy duty and suitable for a wet environment. A row of three-compartment lockers have an integrated cantilever seat stand matching the Abet Walnut (616) laminate lockers and cubicles. The integrated seat stand on these lockers is a great space-saving solution and is perfect for this area.The front line cubicle range fitted the requirements for the toilet and shower cubicles, installed alongside the lockers. The Walnut laminate runs throughout these changing rooms as one of the dominant colours. The cubicle partitions are in Abet Light Grey (478) to separate each cubicle and bring light into the space to complement the rest of the interior.The vanity units and timber integrated plumbing system (IPS) panels are also manufactured from the matching laminate. The IPS in the toilet cubicles are the same colour as the partitions, giving a natural flow throughout. The wall to floor benches and free-standing benches are in Walnut laminate colour as laminate slats are perfect and protected in the wet areas.Most importantly Helmsman has a dedicated and experienced in-house design team supported by its on-site factory. From the outset, we bring a combination of skills and creativity to influence our clients’ decision-making to ensure that concepts turn into reality. From start to finish, we are committed to providing high standards and exceeding customer expectations.

Part of a wider £30,000 refurbishment project, PPG's High Build Epoxy Floor Coating was applied to all internal floor areas. Perfect for application onto new and existing concrete floors, PPG EP301 is a two component, solvent free product that provides a smooth, easy to clean finish resistant to oil and chemical spilage and has excellent wear resistance to low moderate abrasion; such as foot and rubber tyre traffic. To complete the refurbishment, Johnstone’s Jonmat Premium Contract Matt in Brilliant White was applied to the walls and ceilings to provide excellent coverage, leaving a permeable breathable finish.

Albion Stone were able to supply the desired quality of finished product within the contract programme. The New Independent Whitbed specified for the main flooring provided the aesthetic qualities and character required for large areas of floor in a luxury development of this kind.New Independent Whitbed was selected for 1860m² of flooring, 454 linear metres of stair treads and 1,300 linear metres of skirtings. Two fireplaces were also produced using New Independent Whitbed as well as the bath surrounds and bath steps. Independent Grove Whitbed was selected for internal wall tiling and Bowers Roach for feature panels on the external facades.

Bespoke graphic working of the glazed partitions formed part of the interior conservation philosophy by acclaimed architects Page Park, who were awarded the project to breath new energy into St. Cecilia's Hall - part of University of Edinburgh's concert hall and music museum

Background:Canterbury’s Art Museum and library, The Beaney Instituteis a Grade II Listed, Victorian building dating back to 1900.The Institute was granted £11.6m by the Heritage LotteryGrant to conserve, repair and restore the existing buildingplus create an extension that would double the size of theInstitute in order to provide better facilities to the museum,art gallery and library.The Solution:Limelite plaster from the Heritage range was used torestore and protect the internal walls throughoutthe Institute. Limelite Renovating Plaster was appliedto control and minimise dampness that can occur inolder properties. High Impact Finishing Plaster was thenapplied, creating a BBA approved plaster system allowingthe walls to breathe while protecting them from damage,maintaining a heritage-style appearance.The Outcome:The Limelite plaster system was the perfect solutionfor The Beaney Institute. Important pieces of art andmuseum artefacts are protected from condensationand salt transfer from the walls.This modern solution works sympathetically with thefabric of the building providing the aesthetic finishexpected of a building of its character whilst also beingdurable enough to withstand the high footfall of thevisiting public.

When Financial IT Consultancy firm PHI Partners took possession of two run-down offices in Barnet, Hertfordshire, they tasked Interior Property Solutions (IPS) with combining the units to create a luxurious, bright and inviting executive workspace and 'Engine Room’ sales office fit for a cutting edge business.IPS wanted to create a bold impact with their door designs and choose floor to ceiling wood veneer doors, door frames and timber-framed partitions from Forza Doors.To create a unified consent look throughout the suites crown cut Black American Walnut veneer was selected for its close match to the grain of the table and AV unit in the executive meeting room. To ensure the veneers matched, Forza was sent a sample of the desk veneer and personally selected the veneer to match. We also used the same veneer on the doorframes and the Forza Imola partitions for continuity of colour and grain.