"flooring"

Arguably the most famous department store in the world, Harrods of Knightsbridge is a huge retail concern with over 5000 staff members working in over 70,000 square meters of retail space split into 300 plus departments over seven floors.When Harrods decided to redesign their staff food court they required double action doors that were aesthetically pleasing, had a high hygienic rating and were easy to use and they also needed a double action door with a 120 minute Fire Rating.SolutionDortek Installed Polyethylene doors that could be used as personnel doors. They also allow easy movement of trolleys and kitchen equipment between the three distinctive kitchen areas. Dortek also installed double-action 2-hour fire rated GRP doors into a 2530mm wide structural opening to enable staff to bring in large pieces of kitchen equipment when necessary.

Ward Firth 9 at The Northern General Hospital underwent a complete refurbishment as part of an essential maintenance project recently which included redecoration and new flooring as well as the installation of Yeoman Shield Wall Protection Panels and Guardian Handrail.After the work was completed the ward lookedsmart and refreshed which left the originalNurses Station lack lustre, as pictured to the left.Yeoman Shield were able to offer a solution to theworn work-unit with the application, to the sidesof the desk, of 2.0mm thick FalmouthEx protectionpanels in light grey to match the surrounding décor.The tops of the work stations were covered withYeoman Shield Satin Pastel Smooth panels in thecolour Clay.Not only did the covering of the nurse’s stationwith Yeoman Shield products reflect the newsmart décor of the wards but also gave them anextra lease of life with a durable impact resistantand easy to clean hygienic finish.

The Perry Barr Residential Scheme forms part of an exciting £700m regeneration project in north-west Birmingham.When complete, it will welcome thousands of new residents to over 1,400 modern homes. They’ll also have vibrant restaurants and retailers right on their doorstep, along with upgraded transport infrastructure.Towelrads provided radiators for Plot 7, a six-storey residential building with ground floor retail. These included bespoke non-UK market sizes which Towelrads successfully manufactured and shipped into the UK, fulfilling a quick turnaround on a prompt call-off basis. Towelrads also supplied all the chrome electric towel rails in the apartments’ bathrooms.Originally planned to be the Athletes’ Village for the Birmingham 2022 Commonwealth Games, the first residents are due to move into the former Birmingham CityUniversity site in 2023. They’ll be setting up home in houses and apartments spanning the private sector, shared ownership and social housing overseen by BirminghamCity Council.

This elegant beach house bathroom proves that beautiful materials and traditional fittings can create a fresh, modern look that will never date.The design of this home, Bronte House, is inspired by the iconic aesthetic of the homes in Long Islands’ Hamptons. The brief was to combine coastal charm with elegance; a unique style that beach-side Sydney homes manage to showcase so perfectly.Shades of blue, grey and white form the basic colour palette throughout the bathrooms, and offer the perfect backdrop for polished chrome tapware and accessories. Decadent textures such as hand crafted ceramic tiles and marble herringbone floor tiles are paired with softer materials such as fabric blinds and a shiplap-style wooden ceiling. The result is a bathroom that feels elegant yet welcoming and functional.Our Elwick bath was included the design of this bathroom, alongside Perrin & Rowe traditional tapware.Photography: Maree Homer PhotographyDesign: Denai Kulcsar Interiors

Sika supplied a fully-comprehensive solution to provide the ultimate watertight protection for a basement within a commercial superstructure that is destined to earn ‘landmark’ status in London’s Canary Wharf.Located within the capital’s thriving dockside district, 1 Bank Street will occupies a 5,000m2 footprint. The stunning 28-storey building, which is 145 metres above ground, is designed to include cutting-edge trading floors on three levels. A large slip form core forms a significant part of the fully fitted-out building which has achieved an ‘Outstanding’ BREEAM rating, making it one of the most sustainable and desirable buildings of its type in London. Designed by globally-renowned architects, Kohn Pederson Fox Associates (KPF) in conjunction with structural engineers, Arup, 1 Bank Street provides capacity for 6,000 full-time equivalent jobs, enhancing the role of Canary Wharf as a prime London office and employment location.

One Crown Place is a striking, mixed-use development, close to Liverpool Street Station in the commercial heart of London. Two towers providing a mixture of private residential apartments and office and retail spaces.Rising 28 and 33 stories, the towers provide glorious views across the city of London, however it is down at ground level that Renson’s Linius L.050W CLS system was required.Renson worked closely with MACE to achieve a complex design layout for this louvred façade to a ground floor plant area.This highly technical blade, offering significant weather protection up to 3m/s airspeed, whilst still providing excellent airflow at 57% free area & K-Factor of 10.47.We often see the L.050W blade being used in Data Centres due its high performance, providing airflow, reducing humidity and offering significant visual protection.

The project comprised the construction of Newcastle’s tallest building, Hadrian’s Tower on behalf of The High Street Group. Following a 30-month build programme, the 26-storey luxury high-rise mixed-use development in the heart of Newcastle was handed over, with more than 60% of the apartments already sold or let at the point of handover.The development included 160 units which comprised a mix of studio, one and two-bedroom apartments and three spacious three-bedroom penthouse suites. Hadrian’s Tower offers 134,000 sq ft of modern living space a 4,300 sq ft rooftop sky bar and coffee house on the 27th floor.The scheme has redeveloped and in turn transformed the dilapidated city centre brownfield site into a high-quality pedestrian route into the city centre.Shield Membranes supplied numerous products and systems in order to waterproof, insulate and finish all external areas.

Chatham Waters is a large development of 199 luxury apartments in Kent, with far-reaching views over the historic Chatham Docks. Each of the 199 homes features its own large balcony space with Euroclass A1 fire-rated aluminium decking and porcelain paving used interchangeably throughout the scheme to provide zoning and interest.Systems UsedBalcaSmart® Aluminium decking system with boards in RAL 7036 (Platinum Grey) passes beautifully into Quadro porcelain in the shade ‘Argento’. Selected for their low-height build-up, TerraSmart® Pedestal and BalcaSmart® Aluminium decking systems utilise very similar low-height non-combustible RP-FR and RD-FR pedestals, which work together to achieve a seamless transition between zones. DetailThe contrasting external flooring is mirrored in the intermittent placement of the brass screening throughout the buildings in the scheme, providing a distinctive and luxurious appearance.

The project design included a car park solar shading system from Contrasol Ltd. The extruded aluminium profiles form feature solar shading ‘fins’ running vertically on the exterior of the multi-story car park, with galvanized steel plates behind the fins at each floor level to screen car headlights. By using Powdertech’s PWF 020 Wood Finish on the metal the large building could be brought into harmony with its environment, being less visible in the landscape. Unlike wood, PWF will not deteriorate or warp. It is also a benefit for the installer to be working with a homogenous material with good dimensional stability. The colour and gloss retention for Wood Finish is excellent and it will remain looking good for over 25 years with minimal maintenance required. The project in numbers: 9000 metres of 200 x 50mm extruded aluminium profiles 530 pre-galvanized plates, 1m x 1.5 m 7700 fixing brackets 5780 end caps

An important refinement for a single story extensionThe ChallengeThe homeowner knew that in order to maximise that amount natural sunlight for their single storey extension that the addition of rooflights would be an ideal solution, but with an important refinement.The solutionIn order to provide the maximum amount of light we designed a bespoke low-profile pyramid rooflight with blue tinted glass this ensured that the Rooflight gave another dimension to their single storey extension.They now enjoy natural light which gives a greater feeling of space and light, combined with fully glazed floor to ceiling doors meant they were also able to enjoy to views and access to their garden space. Whether you’re at planning or construction stage why not see how we could help you add natural light and space to your home project; you can call us on 01223 792244 or pop us an email via info@nextgenrooflights.co.uk outlining what help you need.

This New Forest family home features an impressive double-height landing space. A small hatch positioned 2.65m above the floor-level provides access to the loft space, which offers useful storage and contains the boiler. The homeowners wanted easy access to the loft. The easy-to-use 'Supreme Vertical' wall access loft ladder from Premier Loft Ladders provided the perfect solution.Despite being manually operated, it is very easy to use due to counter-balance springs and gas-strut mechanism. Furthermore, the Supreme Vertical is offered with a made-to-measure insulated hatch, which avoids having to have a separate (independently operated) door. In addition, the heavy-duty construction makes it ideal for regular use and long-term durability.Visit our website to read the full case study and view the picture gallery. You can also find the 'Supreme Vertical' in NBS Source.

Radii create a bespoke glass partition system design for BCG Digital Ventures, with new dies manufactured especially for the project at our in-house manufacturing facilities.Previously, Radii had worked at 80 Charlotte Street for BCG to produce a stunning timber-framed partition system across 257 meeting rooms and offices in the floors directly above the Digital Ventures site. This new installation was designed to match our original work for BCG and create a synergy throughout the space — but with aluminium framework used in place of timber.The final installation used 100mm wide single glazed partitions and joinery with consistent mullion details. Furthermore, bespoke dies were also created for black powder coated aluminium light portals that were installed around some partitioning elements with integrated LED lighting.Radii also provided some fire rated glazing from the FirePro range, certified up to Ei120 rating for screens and Ei90 for doors.

The scope and challenge:Millions of people visit Edinburgh each year for its renowned history, iconic buildings and vibrant social scene. With year-round visitors from the rest of the UK and overseas, there is a growing need for accommodation that combines the heritage of the city with high-quality, comfortable stays.Old Town Chambers offers exactly that, as a collection of luxury serviced apartments located in the heart of Edinburgh’s Old Town. Each room showcases the building’s fascinating history in a globally-renowned part of the city, teamed with contemporary furnishings and distinctive architecture.The original Old Town Chambers, a listed building from the mid-18th Century, is home to 50 high-quality apartments, accessed via Roxburgh Court, which sits just behind the Royal Mile. In 2021, the owners of the hotel had the opportunity to refurbish the existing building and expand their footprint by taking over an adjoining address – 329 High Street – which would add 24 new high-end apartments to the property across three floors and a mezzanine level, as well as a street-level reception area, bar and restaurant.Häfele was called upon by Chris Stewart Group, who were overseeing the refurbishment, to provide a suite of suitable door ironmongery for the apartments at 329 High Street. The schedule would need to complement both the new, modern apartments added to the hotel and the more traditional reception, bar and restaurant areas.The solution:Working closely with Chris Stewart Group and architects ISA, Häfele developed a tailored hardware schedule and specification. For the communal areas of the hotel, specialist Frank Allart​​​​​​​ handles were selected in a satin nickel finish to complement the traditional style of the space. For the apartments, Häfele’s stainless steel mitred lever handle provided the perfect solution.​​​​​ Furthermore, given the complexity of the requirements, it made sense to utilise the Häfele to Order service – which allows customers to order their products cut, labelled and delivered to their exact requirements. This included both phased floor-by-floor and door-by-door packaging to make the installation process as efficient as possible for contractors Thomas Johnstone Ltd.The outcome:Karen Brown, head of interiors for Chris Stewart Group, worked closely with Ken on the 329 High Street project. She said: “The attention to detail offered by Häfele Projects was excellent; ironmongery can be a minefield but Ken and the team listened to what we wanted and knew exactly what to apply to the project.“There were some intricacies to consider, which were met with experience and a knowledgeable approach. For example, some doors required a lever handle on one side but we were retaining the existing door knob on the other. Getting the two to marry was looking difficult and would’ve been an ongoing maintenance issue for the hotel if not resolved, but Ken suggested connecting them via a spindle which instantly resolved the matter.“We were able to meet and discuss our requirements in-depth, explore a huge range of samples and Häfele Projects were more than happy to liaise with the contractor direct to enable us to focus elsewhere. This project has really opened our eyes to what Häfele is capable of, and we’ve been able to consider other project ranges too which we intend to utilise on future developments, like lighting and small appliances.“We’re already working together with Häfele on another hotel project in Glasgow, and there is huge scope for where our partnership can go in the future.”

Creating a Passivhaus home Balancing sustainability and style, Sort Trae is the culmination of a retired architect’s vision for a home and creative space that blends into a South Yorkshire hillside. HEM Architects helped the client to bring this dream to life, using Knauf Insulation’s glass mineral wool insulation to achieve the incredibly high Passivhaus standards for energy efficiency. Low carbon and high comfort The client envisioned a sustainable build using Passivhaus, a voluntary standard for designing and building properties with very low energy consumption, that offer high levels of comfort for their occupants. To achieve this, the levels of air tightness and thermal performance far exceed those mandated by building regulations. FrameTherm® Slab 32 was friction-fitted within the 140mm thick timber frame walls on the first floor, while DriTherm® Cavity Slab 32 was used to fill the stone-clad masonry cavity walls on the ground floor.  “We try to specify fully filled masonry cavity walls where possible, sometimes up to 200mm wide, to maximise the use of mineral wool insulation. It pays dividends for the client”, explained Liam Seaman, Architectural Technologist for HEM Architects. Thermal performance is critical to the Passivhaus approach. The FrameTherm® Slab 32 provided a calculated U-value of 0.137 W/m2K in combination with the black timber frame wall and cladding. For the masonry cavity wall on the ground floor, a fractionally higher U-value of 0.138 W/m2K was achieved using thermally broken wall ties and DriTherm® Cavity Slab 32. This has contributed to Sort Trae’s exceptional thermal efficiency. Because glass mineral wool is flexible and fibrous, slabs knit together and adapt to minor imperfections in the substrate. This tight fit contributed to an overall air change of 0.54 ach (air change per hour), comfortably below the Passivhaus standard of 0.6 ach, meaning the property is air-tight while still providing good ventilation. Sustainable practices Liam explained his reasons for choosing Knauf Insulation, “The alternative products are often oil-based and the application of these is outweighed by the environmental impact of their production and lifecycle.” Both FrameTherm® Slab 32 and DriTherm® Cavity Slab 32 are manufactured with ECOSE® Technology, Knauf Insulation’s unique bio-based binder that contains no added formaldehyde or phenol. The binder is made from natural raw materials that are rapidly renewable and is 70% less energy-intensive to manufacture than traditional binders. Knauf Insulation’s glass mineral wool insulation contains up to 80% recycled content, mostly glass bottles and jars. It is also compressed so more product can fit per pack or pallet, and less packaging is used. This means there’s more product per truck, resulting in fewer vehicles on the road, and less packaging per m2 of insulation. Achieving the Passivhaus standard In collaboration with HEM Architects and other suppliers, the client has created a stunning home and an inspiring set-up for her loom-weaving workshop. “It is general practice for us to specify Knauf Insulation as standard because we find the product information available to be really clear and useful”, Liam added. Knauf Insulation’s practical, detailed product information made it HEM Architects’ first choice to achieve the Passivhaus standard for thermal performance. 

Efficient and safe goods lifts optimize performance for a large online shopping retailer’s warehouseThe top online fashion retailer improves its productivity, efficiency and safety to meeting higher market demandsOnline orders for the fashion industry have significantly peaked over the last few years, making fashion retailers recognise the need to expand their warehouses. The international and rapidly growing fashion brand has opened a new warehouse in Litchfield to supply their multinational customers efficiently and on time. In 2021, Lödige Industries was contracted to design, manufacture, deliver and install one SHERPA and one ESCORTA goods lift for the new facility. Installation work of the goods lifts was accomplished in November 2021, while the rack system will be finished afterwards.Optimizing space and serving each mezzanine floor efficientlyDue to the increasing number of online orders, the international fashion retailer needed an efficient and space-saving lift solution. The client envisioned a multi-level storage solution, to fully utilise the available warehousing space.Lödige Industries in the UK decided to implement large goods lifts as a solution to access each floor. The free-standing SHERPA and ESCORTA goods lifts fully automate the transfer of goods across five and six floors and were easily integrated into the rack system. The two lifts have been configured specially to help the flow of goods in the building. They have been fitted to align with their vast increase in orders, facilitating their constant success globally. Overall, the cabin sizes of the goods lifts allow the customer to fit all their equipment in the shaft without any disturbances between different stops.Safety and security are key priorities for the customerSafety for employees in installation and operation of goods lifts is one of the key priorities for the fashion brand. Therefore, engineers from Lödige Industries installed the goods lifts in line with Machinery Directive 2006/42/EC. It contains guidelines to minimise any injury to the user or people close to the machine. It specifies the maximum gap in a guard and directives regarding the lift such as lift speeds for different applications, alongside many other guidelines.For the ESCORTA, Lödige Industries fitted a bumper rail to protect the emergency stop button from being damaged. Additionally, rumble strips were installed to prevent the trolley from moving and maintaining the smooth running of the lift. As a result, this reduces downtime of the goods lifts, the amount of call outs and allows them to be more cost efficient.Consistent site coordination to apply the best lift solution for the customerThe biggest challenge for the customer was the limited space available for the goods lifts. Consequently, the customer required a lift solution to fit between the steel building columns and respecting all other work and storage areas. This made the sizing of the lifts become complex.In close collaboration with the customer, the efficiency of the building was maximised by optimising both, general goods flow and use of space within the goods lifts areas. The constant coordination and communication between the customer and Lödige Industries allowed a precise location for the lifts within the space available.SolutionIn order to save space and meeting the available space restrictions, free standing goods lifts were attached to the rack system.The applied safety measurements reduce downtimes of the goods lifts, the amount of call outs and allows the customer to operate more cost efficient.Close collaboration between the go-to fashion brand and Lödige Industries enabled the customer to optimise goods flow while respecting all site specifications.

FIREFLY™ PHOENIX Offers Temporary Fire Protection For Fenchurch Street OfficesThe refurbishment of two complete floors to one of the City’s largest office buildings is making use of the well proven and versatile TBA FIREFLY™ PHOENIX smoke & flame barriers, to create temporary fire barriers while the work is being carried out: protecting people and property across the rest of the five storey structure where business continues as normal.The project at 30 Fenchurch Street, EC3 is being led by Overbury – one of the capital’s most experienced fit-out contractors, while the London office of HLW Architects is leading the design team. T&R Fire Protection meanwhile is the specialist sub-contractor carrying out the installation of the PHOENIX around the atrium, as well as other passive fire protection measures as the scheme evolves.In total T&R has fixed 22 rolls of the lightweight PHOENIX material to create the two hour integrity smoke and flame barriers around the glazed edge of the floor plates at levels Three and Four of 30 Fenchurch Street. The lightweight barrier has been fixed to the bulkhead and at intervals down all of the existing columns, before finally being secured across steel angle sections bolted to the floor slab.IFC Certification duly inspected all 160 metres of the temporary barriers – up to 3,300 mm in height - once installed, on behalf of Overbury and duly issued a certificate of compliance. The permanent works are expected to include creating fire breaks within the ceiling zones at 20 metre intervals, as part of T&R’s overall contract for Fenchurch Street in the region of £250K.The Site Manager for T&R Fire Protection, Tom Port Smith, commented: “We’ve used PHOENIX and other FIREFLY™ products on many hundreds of projects in the past, but in this case it was the insurers for the project who insisted on the installation of the screens to protect the atrium while the sprinkler system was being replaced. The installation though was relatively straightforward and in our work generally, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. We base our recommendations and design drawings on TBA FIREFLY™ standard details and, once they’ve been approved, go in and install the flexible fire barriers.”Tom, like the majority of T&R Fire Protection’s operatives, has attended training sessions at FIREFLY's premises in Rochdale, reinforcing their trade skills and gaining valuable insights into the performance parameters of the different barriers in the range.FIREFLY™ PHOENIX is a lightweight smoke & flame barrier developed to enable compartmentation within buildings to provide up to 120 minutes’ integrity under BS476 Parts 20 & 22. Certified by IFCC, the flexible and straightforward to install material and is suitable for both new-build and retrofit situations.Manufactured from woven and non-woven glass, the FIREFLY™ range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios. The flexible barriers are easy to install horizontally or vertically using a full selection of ancillary products. Used mainly in the construction industry across the UK and Europe, FIREFLY™ Fire Barriers help to contain fire, giving building occupants extra time to evacuate and the fire service to enter safely.

Manhattan Loft Gardens, LondonHaving received the highly regarded RIBA Award for an architectural style which almost defies gravity, Vincent Timber were honoured to supply the beautiful Western Red Cedar that covers the three unique terrace spaces of the Manhattan Loft Gardens. The building was designed to create a community within East London offering 248 rental loft apartments, three rooftop gardens and bars, two restaurants and a beautiful hotel, The Stratford. The building even featured on BBC's The Apprentice with candidates tasked to sell these high-end homes. The stunning gardens are carved out of the building itself with the impressive use of two differing cantilevers. Our timber panelling clads the underside of these overhanging levels whilst helping to bring life to the simply beautiful outdoor space.Spectacular Design Inside & OutDesigned by Skidmore Owings & Merrill for the Manhattan Loft Corporation the spectacular building sits 143m high covering a total of 38,225m². Overlooking the Olympic Park, the building's community helps to keep the vibrancy and creativity of this iconic area alive.With live music and cocktail masterclasses, creative workshops and yoga being just a few of the events here, residents, guests and locals are all invited to enjoy the buzz of the Manhattan Loft Gardens.Thanks to the positioning of the building’s double cantilevers, residents are only ever eight stories from a relaxing open space with unobstructed views across London. The sky gardens on the 25th and 36th floors feature wildflower gardens, BBQ zones and bar areas to dance the night away, all accompanied by plentiful natural timber. Inside, there is even a gym fitted out with the latest TechnoGym equipment.The exterior of the building is focused on nature, featuring wildflowers, water features, cedar pathways and pine trees, while the interior offers a breath-taking contrast. The entrance lobby is pierced by a stunning seven-storey glass atrium and features a beautiful 10m high fireplace. The apartments themselves are equally memorable with a collection of unique single and double-height loft apartments, all with rich oak flooring, bespoke furniture and floor-to-ceiling windows.Why Western CedarWestern Red Cedar was perfect for this project as it offers a wide range of patterns, width, and thickness, creating real flexibility and individuality in design. When properly finished and maintained, cedar will hold its beautiful appearance for decades, complimenting such a high-end build.Despite all efforts at imitation, no man-made product can match the performance qualities of Western Red Cedar. It is often chosen for buildings which require an attractive appearance, superior performance, and resistance to weather conditions. What's more, Western Red Cedar has the least impact on the environment throughout its life cycle. It requires significantly less energy to produce than man-made alternatives and is biodegradable. Our cedar is responsibly and sustainably harvested in the publicly managed forests of British Columbia, Canada. Less than 1% of standing timber is harvested each year and for each tree harvested, three are replanted to ensure our forests continue to exist. This eco-friendly material is the perfect partner for the Manhattan Loft Gardens. As well as being a haven of luxury, the building is kind to the planet. As its major structural elements are exposed there's no need for additional finishes, reducing the volume of material needed for its production, lowering its overall carbon emissions.

After a particularly contentious and protracted planning process, this semi-detached, red-bricked house, part of a group of five properties that form Regent’s Mews in affluent London NW8, finally boasts an impressive third storey extension as a result of the erection of a mansard roof.The new dormer windows to its front aspect lend this 1980’s property a delightfully modern aesthetic, whilst the provision of a green roof to the rear aspect underlines its eco-credentials. The installation of Glazing Vision’s elegant sliding-over fixed rooflight above the stairwell, together with 4 additional fixed rooflights, has maximised the light streaming into this new living space, and also provided an all-important source of ventilation.Initial proposals to convert this house from two to three floors were rejected way back in 2001 by the local Planning Department on the grounds of it being “visually intrusive, overbearing massing not part of the existing architectural language and overlooking neighbours”. These same considerations faced Robinson Leigh Architects, whose track record of successful planning application had led to their appointment in 2013 by a client keen to find a solution to the planning impasse.There were a number of challenges for the architects, as they sought to design a scheme that would prove more successful through planning. The house is situated in St John’s Wood Conservation area, where restrictions on the character and appearance of all buildings are strictly applied. Normally any roof extension in this area would not be permitted and the house, indeed the entire mews, had been identified as an “unlisted building of merit”. Consequently the planners insisted that all new work to the house “must match existing original work in terms of choice of materials, method of construction and finished appearance in order to maintain the cohesion of the mews.The variety of roof forms in the mews, however, presented an opportunity for the architects to put forward their proposal of a flat-topped mansard roof as “a modern interpretation of the surrounding architectural precedent” said Leigh. Critically, the new mansard roof would also not add height above the general roof level of the neighbouring properties in Regent’s Mews, and thus would not be visually intrusive. The design of the three new dormer windows at the front of the house did depart from that of the dormer windows on the other mews houses though – they were square in contrast to the prevalent curved headed windows. However, given that they were really only visible from within the actual mews, the planners considered this alteration in form to be acceptable. Furthermore, the recessed glazing of the dormer windows ensured that the privacy of the occupants using the living spaces would not be compromised.The choice of materials also had to conform to the surrounding properties: the dormer windows were lead-clad, and the roof was tiled in Welsh slate, which softens its appearance and reduces the “apparent bulk of the structure.Another complication for Robinson Leigh related to the impact upon the large villas of Langford Place to the rear of the property. Vehement objections from these residents, who were concerned that the roof extension would shatter the illusion that they are set in extensive grounds led the architects to revise their proposal: the pitch of the northwest slope of the mansard roof was adjusted to a 70 degree angle in order to reduce its prominence in the views from these villas, particularly from 5 Langford Place. A second flat roof, which adjoined the house was removed, and Robinson Leigh extended the mansard roof to the parapet. This then gave the client more internal space, eliminated any overlooking issues, and created a more homogenous and symmetrical design.The architects cleverly designed both the main roof level of the mansard to be landscaped with indigenous flora in order to respect the planners’ preference for ecological biodiversity in the area as well as to attenuate water run-off.In conjunction with these structural requirements imposed on Robinson Leigh’s design of the mansard roof, unlocking natural daylight in the “dark zones” in the interior of the new storey was a key priority. Mindful of the rejection of the glazed roof proposal from 2001, which the planners had deemed to be too intrusive on the neighbours and at odds with the surrounding architecture, the architects sought to reduce the amount glazed by 50%, whilst simultaneously addressing the problem of reduced levels of natural daylight resulting from the recessed dormer windows.Robinson Leigh’s solution was to propose a more sympathetic glazing arrangement to the flat-top of the mansard roof, comprising four large fixed rooflights and a sliding over fixed rooflight from Glazing Vision, that would achieve the high specification they desired. These rooflights, pointed upwards to the sky, would maximise the amount of daylight entering the extension and bouncing off the hardwood timber, which had been used extensively, as Leigh points out, to “draw together several disparate elements of the interior design, such as the sliding walls, pocket doors and floor-to-ceiling shelving and cupboards”.Glazing Vision’s sliding over fixed rooflight was to inhabit the space immediately above the stairwell, which had also been lined in timber to subtly link the top floor with the ground floor and to help draw the eye upwards. Timber frames had also been used on the windows. As with the other four rooflights, Glazing Vision’s sliding over fixed rooflight needed to be made to a bespoke size – the architects required it to be the exact size of the stairwell, or indeed over-sized, so that the frames were not visible from below. Precision-engineered at the Glazing Vision factory in Norfolk, the special sliding over fixed rooflight was supplied in two sections, with an overall span of 2400mm and a width of 2240mm. The minimalist internal framework, finished in pure white rather than the standard grey, ensured that there were unfettered, sky-only views from the inside, thereby enhancing the impression of space and loft. Through the clear glazing of the Glazing Vision rooflight natural daylight absolutely flooded the stairwell, permeating also down to the lower floors.Given the stringent planning controls on the appearance of the mansard roof and the concerns of the vociferous neighbours, Glazing Vision’s sliding over fixed rooflight offered another invaluable benefit to Robinson Leigh. The footprint of the unit on the roof remained fixed, both open and close. This meant that there was no bulky additional furniture required, whilst the minimalist exterior framework was finished in slate grey to blend harmoniously with the Welsh slate roof tiles.No less important was the need for natural ventilation in the mansard roof extension. The architects were keen to create a venturi effect in the central core of the house and stairwell by channeling the airflow through the opening of the rooflight. The Glazing Vision rooflight, specified by Robinson Leigh to slide side-to-side rather than up and down, is electronically controlled at the touch of a button from inside the house, retracting the sliding section over the fixed section of glazing. Once the sliding section is fully retracted, there is a 50% clear opening in the rooflight, out towards the sky, thus providing superior air quality within the top floor, as well as intensifying the amount of natural daylight. An essential security feature of the Glazing Vision sliding-over fixed rooflight is that it is supplied with a manual override as standard.The design, approval and erection of the mansard roof extension took three years but Robinson Leigh have succeeded in updating a tired-looking 1980’s mews house with a new, sophisticated, modern exterior, that quietly complements the surrounding properties. The new third storey has exceeded the client’s needs for additional living space, and the clever use of rooflights has ensured the interior is light, bright and inviting.

Shortly before the new school year started, the municipality of Ogre in Latvia opened a brand new sports complex at Ogre’s gymnasium. In the contest “Sustainability in Architecture Construction Design in the Baltics 2023”, organised by the Building Design and Construction Council, the sports complex was awarded 1st place in the category “Most Sustainable Project”. It was constructed by MONUM construction company.The multifunctional and energy-efficient sports hall has stationary and mobile tribunes, therefore providing space for up to 1700 spectators. The sports complex meets the requirements of the International Athletic Federation with four circular (200 meters) and six sprint tracks, a sector for the long jump, high jump, pole vault, and shot put. Also, in the centre of the hall, there are team sports courts suitable for basketball, floorball, tennis, volleyball and other games. On the second floor, the project's developers have built halls for a gym, gym classes and choreography. The building is complex and multifunctional, and four different Riga Wood birch plywood products have been applied here. Perforated Riga Decor and Riga Lacquer panels ensure excellent acoustics during sports activities, while Riga Paint gives an elegant touch to the lobby. Riga Ply has been used for various construction elements.“Riga Wood birch plywood products were chosen due to two main factors: it is a sustainable, renewable material with excellent technical properties and durable, with high wear resistance. Furthermore, in sports halls it is important to ensure good acoustics and perforated acoustic panels made of Riga Wood birch plywood panels serve their duty perfectly,” comments Maksims Žaguļins, project manager at MONUM.Riga Wood birch plywood has a long lifespan, and what is no less important, the maintenance is easy too. “In recent years, birch plywood has been used in many sports halls, especially for acoustic panels. The technologies that we use allow us to adjust the panels to the specific needs of each project with great results”, comments Intars Metums, head of the Wholesale Department of Riga Wood Baltics. “Furthermore, the versatility in our Riga Wood birch plywood products allows us to find the best solution, whether it’s for wall lining, floors or tribunes,” adds Intars.

Located on the iconic Berawa waterfront, the Atlas Beach Fest in Bali is decorated with contemporary charm thanks to stone-effect porcelain tiles from Atlas Concorde. Explore the project.From solariums that seem to float on the water to the show beach bars featured in the club, the luxurious beach club's choice of style comes across as sophisticated, with a clear multi-ethnic feel. In this heavenly setting, the stone-effect tiles of Atlas Concorde used to decorate the floors in several areas of the beach club add a touch of Made in Italy to the building. The area adjacent to the beach consisting of swimming pools, bars and relaxation areas thus takes on an allure with a timeless appeal. Inspired by split quartzites, or metamorphic stones composed almost entirely of quartz and small amounts of other minerals, stone-effect floor tiles retain all the natural roughness of the original material. Porcelain tiles evoke this trait by offering a surface with a strong, earthy appearance that is easy to clean and pleasing to the touch. Used in four different shades ranging from warm, intense nuances to grey tones inspired by the colour of the original natural stones, Atlas Concorde surfaces adorn the spaces of the beach club with highly accurate details. An attention to detail was critical both for the look and for the design itself. In fact, Atlas Concorde tiles are the ideal solution for those seeking design and technical functionality in spaces intended for public use. The resistance to foot traffic, the healthy nature of the material and the anti-slip properties of Atlas Concorde surfaces have made the beach club spaces an oasis of beauty and superior technical performance. With just the right mix of eye-catching visuals and technical properties, stone-effect porcelain tiles offer Atlas Beach Fest guests a relaxing moment of hospitality and safety. The decision to use stone-effect surfaces also tied in perfectly with the theme of the entire venue, creating a stylistic mix capable of combining eastern elements and the luxury of fashionable Mediterranean locales. And so it is that wood, stone, and soft fabrics typical of Spanish beach clubs coexist with the inevitable Indonesian canopy beds and furnishings with an eastern flavour. Atlas Concorde's stone-effect porcelain tiles helped to boost all the stylistic components included in the architectural design thanks to a material with a natural flavour.

Two new apartment buildings in Kent have been given a thermally-efficient and visually-striking façade thanks to the use of an external wall insulation system from Sto. The two new blocks in Ashford - Stour Heights and Somerset Heights – have a single-skin construction, comprising a reinforced concrete frame with concrete block infill, and they benefit from the installation of StoTherm Mineral external wall insulation, with a StoCleyer B mineral brick slip and StoSilco render façade finish.“An alternative insulation system was originally proposed for these buildings,” says John Mahoney of Sheffield-based J Mahoney Architects. “As things progressed a different solution was required to meet the demands of the various parties involved in the project. Sto pretty much leads the pack in terms of quality, and the StoTherm Mineral system was able to satisfy everyone’s requirements, so it became the obvious choice. The fact that Sto could work with us and provide technical support was also extremely helpful.”The BBA-certified StoTherm Mineral external wall insulation system uses mineral-fibre boards to provide outstanding thermal performance, combined with reliable fire protection and effective sound insulation. Its efficient single-leaf construction and external installation do not compromise the building’s interior space, and it can be installed without the need for additional expansion joints.For the new buildings, it was installed using Sto’s unique Sto-Rotofix plus mechanical fixing system. The helical Rotofix fixings create a cavity behind the insulation board, which can be easily adjusted after installation to ensure a level outer surface is created. This system combines the ease-of-use of ETICS anchors with the flexibility of a mechanical rail system, but without the material and labour cost of installing the rails.“The StoCleyer B brick slips were specified to meet certain planning requirements,” adds John Mahoney. “An alternative brick solution was originally considered, but Sto was able to manufacture slips which were a perfect match for the proposed original. The fact that they were also fully compatible with the Sto insulation system was another significant point in their favour.”The new buildings have added 109 one- and two-bedroomed flats which are spread across the five floors of Stour Heights, and the three floors of Somerset Heights.

This scheme was designed by the architects Hawkins Brown and constructed by Mace, who were very easy to work with and have a great project team.One of the main challenges of the project was the fact that is was being constructed during lockdown, and both design team and project team were all working from home, but because of such good communications across the teams, everything flowed very well. N06 East Village is located at the site of the former 2012 Athletes Village and close to the London Olympic Park 2012, so there’s plenty of sports locations nearby!The façade sections were constructed using a modern method that involves some manufacturing and assembly being completed offsite. They were pre-assembled and fixed offsite onto the precast concrete floor units and this new high rise construction solution, removes the need for scaffolding Because each floor is fully enclosed, it reduces project time and the risk of site operatives working at height and increases project speed time with less labour needed on site. This was especially beneficial considering construction was during the Covid-19 pandemic. It is believed that throughout this project there was 40% less vehicle movements to and from site and 70% less site waste created.*We supplied the original Quadra metal riser doors throughout the two residential towers however we have since improved the doorsets and they are now Quadra+. N06 East Village project has a modern interior with bright, bold colours featured on both the inside and the outside façade. Selo’s concealed riser doors were a perfect fit with their interior design providing a sleek, flush solution throughout the corridors.This project was one of the first major projects that we supplied our Quench fire-stopping protection to after they requested a factory fitted fire stopping solution. Quench is a safe and reliable solution that is pre-fitted to the riser door frame, removing the need to apply intumescent mastic. It has a 120minute fire resistance rating when used in conjunction with Selo’s Quadra+ riser door system. This solution removes the need to work inside the riser to apply the intumescent and thus removing the fall risk and hazardous working environments.*Source: https://www.cast-consultancy.com/knowledge-hub/plot-n06-east-village/

The Vaughan Way development in Leicester features state-of-the-art apartments above a two storey car park. While this gives residents the best of both worlds – city living and parking in a limited footprint – it represents a challenge for developers in the form of thermal bridging.Most car parks feature open walls to allow adequate ventilation of exhaust fumes, so the separating floor must be well insulated to prevent warm air from the flats escaping into the car park below. With this in mind, main contractor Winvic approached Knauf Insulation for advice on the best insulation to specify in order to achieve the specified U-value of 0.2 W/m²K.Knauf Insulation’s Technical Support Team conducted U-value calculations to determine the thickness of Soffit Linerboard required. They then worked closely with Winvic to provide technical advice to ensure all design considerations were addressed.Soffit Linerboard is a robust Rock Mineral Wool slab. It is a high-performance thermal insulation and offers excellent sound absorption to provide high levels of sound reduction; something residents will appreciate when their neighbours are parking below.Soffit Linerboard is also non-combustible, with an A1 Euroclass Reaction to Fire Classification, essential to comply with changes to the building regulations, as Vaughan Way will be more than 18m tall when complete.Soffit Linerboard is one of more than 40 Rock Mineral Wool insulation products produced at Knauf Insulation’s Queensferry plant. It is manufactured with ECOSE® Technology, Knauf Insulation’s unique bio-based binder that contains no added formaldehyde or phenol. It is made from natural raw materials that are rapidly renewable, and is less energy-intensive to manufacture than traditional binder, so it is more environmentally-friendly.Products made with ECOSE® Technology are soft to touch and easy to handle. They generate low levels of dust and VOCs, and have been awarded the Eurofins Gold Certificate for Indoor Air Comfort.The insulation was delivered direct to site by distributors Encon in Nottingham and was installed by sub-contractors L Reynolds.From the additional warmth, to noise reduction and improved safety, adding Soffit Linerboard to the separating floor between the car park and flats will make city living even more pleasant for the residents of Vaughan Way.

Danish manufactured Troldtekt panels are commonly specified throughout the UK and Europe to improve the interior acoustic environment. Two recent Danish projects are the transformation of an old building into a car dealer’s offices for Karvil Biler, while the other is an extension of Randers Architects’ own headquarters into a mix of offices and exclusive residential units. Both projects use Troldtekt® line with its perfectly symmetrical vertical lines to balance walls and ceilings with great aesthetics, conveying warmth and providing a modern look coupled with high performance sound absorption.For the Architects’ washrooms, Troldtekt® line was chosen to add visual vibrancy to the rooms. It also exhibits different appearances depending on the angle from which the wall surfaces are viewed. The edges have been milled where the panels meet the ceiling, around electrical sockets and switches and also at floor level where bamboo skirting has been integrated. All have been elegantly cut to ensure a neat finish and fine detailing.In the car dealers, Troldtekt® line was selected in order to enhance and benefit the whole indoor climate. “We wanted to create a coherent look. The milled grooves have a visually calming effect and contrast well with the new raw concrete floor,” the project manager explained. Troldtekt® line forms nine acoustic solutions that make up the “design solutions” range which combines the best ideals of form and function. Founded on the Cradle to Cradle design concept, 100% Troldtekt’s natural wood wool panels are manufactured in a new state-of-the-art production facility. With a variety of different surfaces and colours, they can be supplied in the FSC® 100% category (FSC®C115450) contributing to a building’s BREEAM, DGNB and LEED rating. In addition to their high sound absorption and tactile surface, the panels offer high durability and low cost life cycle performance, as well as inherent sustainability. They are also a natural, breathable material which can absorb and release moisture, which is why they have been awarded an Allergy Friendly Product Award by Allergy UK. Samples, case studies and technical information are easily sourced from tel 01978 664255 or visit www.troldtekt.co.uk

Conversion of listed Cotswold coach houseDesign Storey architects are thrilled with the transformation of this curtilage-listed coach house located in a walled garden within a conservation area in a small Cotswold town. The task was to extend the ground floor of the property to create a new boot room and dining room, increase the amount of light into the property and improve connection of the house with the garden. The project proved particularly tricky due to the listed and conservation status which made selection of materials especially sensitive. Having specified Lindab guttering for these reasons and for its longevity and minimal appearance, the architect was assisted with samples so that the client could choose their colour palette on site. They opted for Anthracite Metallic coated finish gutters and downpipes and square hoppers which the architect said, “contributed to the overall quality of the build and visual appearance of the final building”. Following this, Design Storey are using Lindab guttering on a number of further projects including a school extension and a family home, stating that Lindab, “provide a quality range of products to suit a number of solutions.”

With views overlooking central Manchester from several floors up, the designers for this workspace have utilised glazed partitions throughout to maximise the transfer of light and make the most of the stunning backdrop offered by the city skyline.London Wall was approached to provide a glass moving wall system that could seamlessly integrate in to the overall design of the space by matching the proposed glass partitions, while offering space flexibility.Our Type G200 system was the perfect choice, with a crittal effect indention to the static panels on show elsewhere within the space. The glazed panels can quickly and easily be stacked, allowing staff the choice between a single, large open plan space or two smaller spaces.When the panels are in use, the two spaces both remain easily accessible thanks to a lockable pass door. Type G200’s impressive acoustic performance ensures that sound transfer between the two spaces is kept to a minimum, therefore reducing noise distraction and increasing privacy.

Resilient 250 was installed beneath engineered wood flooring in the kitchen, landing and living room, covering approximately 75m². These spaces were located above bedrooms, and it was therefore essential to minimize sound transmission into areas where people would be sleeping. As Resilient 250 is a high performing acoustic underlay, this provided excellent impact performance in excess of UK sound insulation regulations. Benefits of Resilient 250 • Extremely fitter friendly • Clean, quick and cost effective installation • Less subfloor preparation required – an important factor given the client required minimal disruption • Provides lasting stability and comfort over time Made of durable sponge rubber, it is engineered to provide long lasting performance without deterioration. Resilient 250 provides sound improvement of 19 dB ΔLw, creating a quieter, more comfortable environment for the whole household. Resilient 250 is also an exceptionally ‘fitter friendly’ product, supplied in 10m² rolls for easy handling and distribution on site

With views overlooking central Manchester from several floors up, the designers for this workspace have utilised glazed partitions throughout to maximise the transfer of light and make the most of the stunning backdrop offered by the city skyline.London Wall was approached to provide a glass moving wall system that could seamlessly integrate in to the overall design of the space by matching the proposed glass partitions, while offering space flexibility.Our Type G200 system was the perfect choice, with a crittal effect indention to the static panels on show elsewhere within the space. The glazed panels can quickly and easily be stacked, allowing staff the choice between a single, large open plan space or two smaller spaces.When the panels are in use, the two spaces both remain easily accessible thanks to a lockable pass door. Type G200’s impressive acoustic performance ensures that sound transfer between the two spaces is kept to a minimum, therefore reducing noise distraction and increasing privacy.

Based in Lincoln this multiple dwelling new build project required sash windows to fit its architecture. The homes were built using local stone which meant standard white windows wouldn’t match its high-end appearance. The developers also needed windows that came with high performing benefits such as thermal efficiency, security, all while remaining maintenance-free. Using our in-house spray shop, Charisma Rose was specified in a solid cream option that complimented the stonework beautifully. The trickle vents were also colour matched to seamlessly blend in with the windows and keep the luxury charm of the buildings. A traditional astragal bar grid was picked to match Georgian architecture as well as run through horns and a 2/3 unequal split for the ground floor. This project ran smoothly providing more than 50 sash windows over seven dwellings. All windows were manufactured and delivered on time and snag-free, meaning there was no impact on the developers schedules.

Canonbie Road was home to a former hostel, which was demolished to construct a three-storey building comprising six council homes for families requiring temporary accommodation. Led by Lewisham Council as part of their programme to deliver new affordable council homes across the borough, the development includes dual-aspect family units of two and three beds in two wings that step with the sloping site. Each flat has generous private amenity space, access to a shared tree-lined garden and twelve cycle spaces.Cellecta’s YELOfon HD10+ was specified by Avanti Architects due to the system being lightweight, easy to install, and delivers unrivalled acoustic performance when used to isolate a floating screed from a structural concrete floor. YELOfon HD10+ is an acclaimed resilient layer system that carries 3 proprietary Robust Details: E-FC-5, 17 & 18.Building Associates Limited were supplied 450m² of Cellecta products for this development in Forest Hill.

Bermondsey Spa is a transformation of a neglected corner of south London into one with well designed homes, streets, spaces, and places for the local community. Located in Southwark, close to Tower Bridge and Bermondsey Underground station. 2,000 new homes, 40% of which are affordable housing, have been created. 16 GP surgeries in two new health centres, a NHS dental practice, pharmacy, youth, and play facilities, 2.5 hectares of re-landscaped open space, bicycle parks, council offices and a One Stop Shop, shops, including a food retail store, and offices for the Southwark Primary Care Trust have been constructed.Cellecta’s YELOfon HD10+ was specified by Levitt Bernstein for this development for its acclaimed resilient layer which isolates floating screed from the structural concrete floor. YELOfon HD10+ has superior impact sound deadening properties, is light weight and is easy to handle and install.Hyde Group was awarded this 25,000m² contract to construct this development in one of the most vibrant places to live in London.

Fresh Wharf is a multi-phase brownfield project which transforms the wharf on the river Roding. The project includes a demolition of the old industrial estate and construction of 911 one and two bedroom apartments in a range of tenures, flexible commercial spaces, generous landscaping, a new riverside walk and new infrastructure, along with parking concealed below podium gardens. Buildings ranging from 3 to 14 storeys are surrounded by cafes, shops, and restaurants, it is 15 minutes from Barking station, with access to the underground, overground and rail connections into central London. Cellecta’s YELOfon HD10+ was specified by Frank Reynolds Architects due to the system being lightweight, easy to install, and delivers unrivalled acoustic performance when used to isolate a floating screed from a structural concrete floor. YELOfon HD10+ is an acclaimed resilient layer system that carries 3 proprietary Robust Details: E-FC-5, 17 & 18.Countryside Properties UK was awarded this 40,000m² contract for this development in Barking.

CAT stair nosings have been installed into one of the Worlds first purpose-built meeting facilities based in Westminster, London.​AN69 was the main section to fit the rounded step edge, then aluminium extension piece ANEXT creating a wider tread connected to an ANRE25 ramp edge at the back covering the safety vinyl flooring. Finally, the robust Aluminium ATI49.5 aluminium inserts were inserted into the tread of the AN69 to conceal the screw head fixings and give an all-aluminium finish.​Opening in 1912, the Great Hall has an impressively long history for hosting various events, the first meeting of the United Nations in 1946, debates, concerts and shelter for Londoners during the second world war.​Situated in the venues undercroft, Wesley’s Cafe is a hot spot for visitors and especially popular with tourists, the cafe covers over 300m2 and also is adjacent to further event space. Due to the entrance into the cafe is via a staircase, the constant high footfall called for a stair nosing made up from a combination of our Aluminium products.

The Tytherington is a 4-star hotel and club situated nearby to Manchester airport. The hotel saw the refurbishment of its club and the development of 65 bedrooms, with a bar and tennis court, guests can use the spa, wellness centre, fitness centre, sauna, hot tub, and garden. The new investment sees refurbishment of club facilities including members bars, changing rooms, function rooms, and reception areas. With over 300 onsite car parking spaces, Capesthorne Hall is 7.3 miles from The Tytherington while Fletcher Moss Botanical Gardens is 13 miles away.Cellecta’s ScreedBoard 28 was specified by HPW Architecture Ltd due to it being suitable for all floor types and is frequently viewed as the solution of choice for new build and refurbishment developments. With its interlocking edges for installation convenience, high density, and unique resilient layer it provides unrivalled acoustic performance.J M Scully was awarded this 2,000m² contract to construct this development and refurbishment in Macclesfield.

Orbis OS211 Glass Infill Top FixOrbis OS200 Vertical Bar Infill Side FixThe main NHS hospital for Blackpool and the Fylde Coast, Blackpool Victoria Hospital has undergone a £16.4 million upgrade to create a new main entrance and a multi-storey car park.The new entrance includes a pharmacy, retail units, café, main reception, waiting area and office accommodation. Featuring extensive curtain walling, the new main entrance has been designed to maximise natural light and provide a feeling of openness. The use of glass for the balustrades helped to enhance this design style throughout the main feature areas and voids, using Delta Balustrades’ Orbis system.Delta Balustrades also supplied the balustrades and handrails for the main and rear staircases in the new multi-storey car park. Delta Balustrades calculated the loadings for all areas of the hospital installation and specified multiple fixing details for the atrium to accommodate variations in floor levels and construction.

Bespoke Access Structure | Case StudyThis two-level access structure with staircases, cladding, edge protection handrailing and anti-slip grating flooring was designed by Dura Composites in conjunction with our client ENGIE Fabricom UK, who provide engineering and construction services to sectors including renewables, oil and gas, power, chemical and energy from waste.With the ability to supply both composite timber cladding for the containers and all the required GRP elements for the project, Orsted chose to work with Dura Composites. Although steel had previously been considered, the rising cost of steel versus GRP and its tendency to corrode in coastal environments made composite materials a far more durable and cost-effective option.The resulting access structure is safe, looks attractive and is non-conductive and non-corrosive. With a long design life and 25 year warranty, the GRP components are part of the latest d² range from Dura Composites which offer safer, stronger, faster and proven properties.