"electrical"

Western Power Distribution (WPD) provides service for Midlands, South West and South Wales, United Kingdom, with a network that spans the country’s width. WPD delivers electricity to more than 21,000 square miles (55,500 square kilometers) via 136,000 miles (220,000 km) of overhead lines and underground cables and 185,000 substations. WPD has committed to provide safer access to their 15,000 towers across the network. The company had used a double lanyard for working at heights, but wanted an alternative system that was faster, safer and reduced physical demands of climbing for their line operators.

Whites Concrete has supplied a pre-cast concrete chamber for an 11-tonne Archimedean screw turbine installed on the banks of the River Esk in Whitby, North Yorkshire by national engineering and construction company JN Bentley. The Whites Concrete chamber has been constructed using robust Groundwall L-shaped units, to house the 2.9m diameter screw turbine. The latter will operate with up to 4 cumec with a rated capacity of 51.6KW as it generates electricity for Esk Energy (Yorkshire). Esk Energy secured funding towards the cost of the project through a community share issue.

750 metres deep inside a Welsh mountain lies the biggest stored power plant in Europe. With its remote location and harsh operating environment, Engie First Hydro contacted the Latchways team at MSA Safety to provide the complete solution for all its operational and maintenance fall protection needs. 7 million cubic meters of water are pumped through the giant turbines to generate power and then reversed as pumps to return the water to the reservoir. This tough working environment presents unique safety challenges for the electrical & mechanical operational and maintenance teams when working at height.

The Wave is a new inland-surfing lake, powered by 100% renewable electricity that provides the opportunity to surf all year round regardless of weather conditions or tides. The site’s entrance and car park suffered from boggy ground conditions following spells of wet weather and with approximately 2,750m2 of impermeable surfacing, there was limited potential for infiltration. The shuttle bus route between the main facilities and the car park is now surfaced with Truckcell 80 Permeable Paving blocks, filled with free draining angular gravel to allow rainwater to percolate down to the existing sub-soil.

Project:Surespan manufactured a single leaf HLAC recessed access hatch to Queens Square in Crawley, part of a £3.2 million project. ProductSurespan manufactured an 80mm access hatch to fit a structural opening of 1000 x 3500 is operated by hydraulic cylinders and a hand pump. The operation will be by an electrically driven single power pack, including a push-button or key switch. Oil supply to the cylinders will be from a hydraulic mini-pack that can be remotely or locally sited. A retractable safety grid was also installed on three open sides, manually operated.

Surespan has manufactured and supplied a large access hatch in the engine house of Heathrow Airport’s new terminal five. The three-leaf hatch – which measures 6 x 3 metres – can take up to 5kN/m² loading. It has an electric actuator opening which can be activated remotely and is fire rated for up to two hours. Bill Burke, Contracts Manager at Heathrow Airport said: “We were very impressed with Surespan’s proactive approach throughout the whole project. The hatch has been well received by the authorities at Heathrow”

Following a successful first phase in 2018, London Power Tunnels 2 (LPT2) is a project to ‘rewire’ south London. The six-year, £1bn scheme will comprise the construction of 32.5km of 3m-diameter tunnels built deep below the road network between Wimbledon and Crayford to carry high voltage electricity cables.A Hochtief-Murphy Joint Venture (HMJV) was awarded the contract in December 2019 to design and construct the tunnels & shafts and install the EHV (extra-high volume) cable brackets. The New Cross site is one of several in the overall scheme.

Whites Concrete has supplied a pre-cast concrete chamber for an 11-tonne Archimedean screw turbine installed on the banks of the River Esk in Whitby, North Yorkshire by national engineering and construction company JN Bentley. The Whites Concrete chamber has been constructed using robust Groundwall L-shaped units, to house the 2.9m diameter screw turbine. The latter will operate with up to 4 cumec with a rated capacity of 51.6KW as it generates electricity for Esk Energy (Yorkshire). Esk Energy secured funding towards the cost of the project through a community share issue.

The Home Lift installed in this private house is an EcoVimec Home lift, which has been chosen to increase comfort and add value to the property. The owner chose EcoVimec home lift because it’s electric and environmentally friendly (it has reduced energy consumption and doesn’t use hydraulic oil).The EcoVimec Home lift has been designed to fit within a masonry shaft, offering a compact and space-saving solution to access multiple floors of the house. The cabin has been designed to be as discreet as possible, with a low profile and modern appearance that complements the property perfectly.

Eagle have completed another successful installation for Cala Homes at Sandy Lane Cobham. The installation consisted of 2 sets of electric gates and intercom system to the houses. Compliance with latest directives is essential so these gates were force tested and issued with a declaration of conformity. Eagle support all installations and are able to offer a 24hour emergency call out to offer peace of mind in the unlikely event something should go wrong. In the event of power failure all systems can be manually overridden. All systems are supported with CAD drawings and cabling requirements for intercoms and access control

To operate at optimum capacity, the Ricoh Arena required a floor access solution to reach under floor services carrying water, drainage, electricity and data to internal and external leisure amenities. Staff at the arena also needed to carry out regular checks on under soil heating, sprinkler systems and floodlighting. Howe Green’s 7500 Series floor access covers were selected to provide safe and easy access to the concealed services. Fitted quickly and unobtrusively with the Terrazzo flooring used throughout the stadium complex, the covers are double-sealed to meet the highest standards of hygiene and security.

Over 40 of Howe Green’s 7500 Series Medium Duty Stainless Steel Access Covers were installed at The Nottingham Hub as part of the station's comprehensive enhancement project. Flooring specialists DMC Contracts Ltd required a network of access points within the station. They wanted to ensure that essential underfloor drainage, mechanical and electrical services could be reached quickly and easily. The 7500 Series specially designed recessed lids enabled the panels to be tiled with Quiligotti Terrazzo floor tiles. The result - an uninterrupted and continuous surface in the station's south concourse and Grade II listed porte-cochère.

The Merker site in Baden now houses 45 low-cost apartments where the enameling plant once stood. The five-story structure sets new standards with regard to insulation and energy consumption. Architects Zulauf & Schmidlin have designed 45 apartments as the second stage of converting the site of the former Merker factory in Baden. The owners wanted an energy-efficient building and apartments with different layouts – suitable for singles and families. The folding sliding shutters made of lasered, perforated metal plate are equipped with the HAWA Frontfold 20 hardware.The shutters are powered by the building's electric system.

The award winning National Waterfront Museum required an access solution to provide quick, easy and safe access to concealed under floor mechanical and electrical equipment. Howe Green’s 7500 Series floor access covers were purpose designed for installation throughout the museum. They run across the reception areas, displays and exhibits. Slim line aluminium show edges present clean and crisp geometry within the many different types of floor covering used throughout the building. The access covers provide a heavy duty and tamper resistant, aesthetically pleasing access solution for the highly trafficked pedestrian area.

79 of Howe Green’s 7500 Series aluminium access covers were specified for Eco-Friendly primary school, St Bernadette’s in Antonshill. Council architects required a solution to access essential services housed in raised flooring including the school’s sprinkler network, hot and cold water supplies and electric and data cabling. The covers were installed by A. Andrews and Sons to cover a continuous run of 75 metres of floor space with additional multipart units also fitted onto adjoining legs. The access covers were designed to be in-filled with industrial grade carpet to match the surrounding area.

Howe Green’s 7500 Series Medium Duty Access Covers have been installed in Manchester Cathedral as part of extensive reordering works. The 7500 Series Access Covers were chosen to provide reliable yet virtually invisible access to new mechanical and electrical chambers across the entire body of the building. Over 70 covers were made, each to a bespoke size to fit precisely with the new Burlington Stone slabs being installed. Howe Green also designed a special cover grating to allow air supply to the blower working the bellows of the Cathedral’s remarkable organ.

Over 60 of Howe Green’s 7500 Series floor access covers were chosen for the development of a sizable extension of King’s Cross tube station. An access solution was required to provide access to essential under floor services including ventilation ducting, electrics, communication cables and rail services. The specification required a solution that would prevent the passage of fire through service channels. Howe Green’s 7500 Series access covers met requirements with a three hour fire rating. In addition to single covers, Howe Green’s innovative multi-part covers were also used.

When proposing the architectural design, one challenge for Nickel 28 was how best to implement effective lighting into the large warehouse facility. Aiming to limit reliance on electric and artificial lighting in an effort to reduce energy consumption, daylighting solutions became a key consideration. Kingspan Light + Air, understanding the needs of the client, delivered a bespoke solution that satisfied the specific needs of the warehouse facility by helping to maximise on natural lighting. Implementing the Kingspan Day-Lite Kick wall light system horizontally across the loading bays in the warehouse enabled the facility to maximise on natural light without glare.

Study shows the significant benefits of LLumar® films for saving energy, reducing CO2 emissions, improving thermal comfort, and controlling glare: Energy: - 3.9 year simple payback - 42 % annual savings on electrical energy - conditioning cooling - Savings of €125 800 on energy costs over operational lifetime of the film - Reduction of 46 tonnes annual CO2 emissions Thermal Comfort: - Reduction in indoor temperatures of up to 5 °C when HVAC cooling switched off - Productivity savings estimated at €40 per employee per cooling month Lighting and Glare: - Significant reduction in glare

The National Grid Site on the Isle of Grain is a very sensitive environmental area, from the site liquefied pressurised gas and electricity is distributed to the Southern UK, France and Belgium. Site required a sewage plant able to treat raw sewage to 15:15:10 standard. Due to the high water table, plant had to be installed above ground. Discharge from the sewage plant was directly into the Thames/Medway estuary. The Marsh UP was installed replacing the existing sewage plant that failed consent standards. The plant has performed better than the 15:15:10 standard set by the EA.

Metal pipe boxing from the Pendock Profiles range is concealing heating pipework, electrical cabling and ventilation ducting at Phoenix Point in Thamesmead as part of a refurbishment and upgrade programme of homes at the striking, cylindrical high rise building.Originally built in 2008 on the site of a boiler house used for a community heating scheme, the 8 storey, circular building provides a mix of one and 2 bedroom flats. The Pendock aluminium boxing is used extensively in the refurbishment and is located below the walkway on each tier, following the form of the structure to conceal building services, as well as acting as a mounting point for lighting.

record uk installed a 3 wing all-glass revolving door with a stainless steel frame to provide an attractive and impressive entrance to Horizons House in Aberdeen, a development of prestigious serviced office suites built by Waterloo Quay properties. The revolving door complemented the modern and attractive interior and prevented through draft which otherwise may have posed a problem with the entrance opening directly into the reception area. This revolving door was fitted with a fully automatic in-ground electric mechanism and microprocessor control unit. Safety features are also built in and activated by infrared detectors and overload detection.

When the Hong Kong Disneyland Resort was planned, the project included a 7-bay fire / ambulance station which featured a garden style theme to enable the buildings to harmonise with the green surrounding and the nearby Theme Park. Bolton Gate were specified to provide fourteen electric folding doors which included a special green powder coating, Lexan vision panels and faux louvres to each door. In addition, the doors had to be designed to resist typhoon loadings of up to 3Kpa, were manufactured in Bolton and shipped to Hong Kong where they were installed by the local agent Deacon.

Recently refurbished, Vodafone’s Manchester office is the first building in the UK to combine two electric moveable walls, delivering an entirely automated system for dividing room space. Working with architects, CMI Workplace and main contractor, Overbury, Style was specified to install a fully automatic Dorma Moveo Glazed ComfortDrive moveable wall adjacent to a Skyfold, the fully automatic, vertically rising operable wall, housed in the ceiling cavity. At the push of a button, the walls open and close with ease, offering a phenomenal lab tested 50dB Rw acoustic integrity for the glass system, and 51dB Rw for the Skyfold.

Project: Surespan custom-designed a hatch to provide access to a Biomass storage plant at the new Criminal Justice Centre, Northampton.Product: The double leaf hatch – measuring 2750mm x 2900mm – is electrically operated by a key switch and has synchronised leaf operation with a safety grid. Rated to FACTA Class A pedestrian loading, it was designed with a chequer plate lid to match the surround and incorporates a rain skirt apron and Sureguard handrail system on both sides. A secondary 1000mm x 1000mm gas spring-operated floor hatch was installed with a retractable hand hold and ladder for safe and easy access.

Surespan supplied a number of circular dome rooflights with triple layers to The Key, situated in the new Science Central development at Newcastle University. These large 1500 (49”) and 2000 (79”) diameter polycarbonate domes feature triple layers providing a U-value of 1.8 W/m²K. The rooflights were supplied with electric opening actuators to allow ventilation to control the temperature of the fabric structure. Surespan Dome skylights were specified due to their high sustainability and small impact on the environment. The triple layers ensure compliance with energy-saving requirements and offer excellent air tightness.

A home owner near Lake Constance has fulfilled his dream of having an office with a view: From the top floor, one can enjoy a fabulous vista of the water and the Alps rising into the sky behind the lake. In terms of building technology, virtually everything that you could wish for in an intelligent home has been installed. All components in the house have been networked via a KNX system, so that they can be controlled centrally and even automatically, when cross-linked with each other.Architect:  Matzke ArchitekturbüroElectrical installation: Contrel - Building Control Systems Photos: Ulrich Beuttenmüller for Gira

he Great Blakenham incinerator plant is a joint initiative between Suffolk County Council and waste management company SITA UK. This energy-from-waste facility uses the household and business waste left after recycling, burning materials which would otherwise go to landfill, and generates enough electricity to power 30,000 homes. Although operations carried out at the plant are largely industrial, the appearance of the building itself including the suspended, glass fronted office section required hard landscaping to increase overall aesthetics, as well as providing a SuDS solution to ensure safe and practical surface water removal in the car parking areas...

AusNet Services, formally SP AusNet, is the largest diversified energy network business in Victoria, Australia. The company owns and operates approximately AUD$11 billion of electricity and gas transmission and distribution assets. In March 2004, the Occupational Health & Safety (Prevention of Falls) Regulations 2003 became effective, requiring AusNet Services to cease sole reliance upon dual lanyards, and to consider other attachment methods for climbers during maintenance and other transmission tower operations. MSA provided AusNet Services with not just products, but a complete service package that provided comprehensive support for AusNet Services’ ground installation team.

Elephant Park is part of a £2.3 billion regeneration project in Elephant & Castle. It comprises a mixed-use development of 3000 new homes and up to 50 shops /retail units all centred around a new 2-acre park. Bolton Gate assisted the Architect with the design of a large electric Multi-Fold Gate to the Service Bay which consists of twelve equal leaves each constructed from an SHS frame with 50 x 10mm vertical steel fins and internal mesh to prevent the ingress of birds. Matching cladding and balustrades completed the elevation all of which were powder coated black.

Crown’s earthbalance scheme sets out the company’s commitment to being more sustainable and less wasteful as well as helping customers and staff make responsible decisions. The earthbalance scheme covers all aspects of Crown’s business and applies to all staff and operations at Crown’s two UK manufacturing plants and network of Crown Decorating Centres. Crown has reduced its overall electricity consumption by 15 per cent, reduced packaging waste by approximately 15 per cent, recycled more than 800 tonnes of paint cans and donated 112 benches made using recycled paint cans through social enterprise NIMTECH.

Project:Architects Foster + Partners approached Surespan to design and manufacture two roof hatches for Circle Hospital Bath – the new centre of clinical excellence due to open in late 2009. Product:The huge single-leaf glazed roof hatches are electrically operated by push button switches, one hatch incorporating a side door. The high spec glazed lid is supported by heavy-duty aluminium hinges and features an integral ‘wrap over’ edge, incorporating double unbroken EPDM seals. The hatches offer a high level of thermal insulation against heat loss and condensation, together with excellent sound absorption properties.

Falco is pleased to announce another installation of the UK’s only automated cycle wheeling ramp, for 20 Ropemaker Street, located within the heart of the city. The new automatic cycle wheel ramps have been installed by Falco as part of a £240m state-of-the-art development bringing a new commercial building of more than 450,000ft² of Grade A, BREEAM ‘Outstanding’ office space and premium retail provision to a prominent corner site just north of Moorgate Station.The automated bike wheeling ramp known as the ‘VeloComfort®’ is a huge innovation and Falco is once again delighted to bring what is standard Dutch cycling technology to the UK market. These wheeling ramps provide cyclists with the next generation of accessibility and are designed to assist users with manoeuvring their bikes up and down stairs with virtually no effort.This is particularly important where a bike is either heavy or perhaps has a basket or panniers and makes carrying a bike up stairs or even using a traditional wheeling ramp difficult. The VeloComfort® range comes in two patented innovative designs, one for manoeuvring bicycles up the stairs - VeloComfortUp®, and one for down - VeloComfortDown®!Falco supplied and installed 22m of both VeloComfortUp® and VeloComfortDown® designed to meet the client’s exact stair dimensions.The VeloComfortUp® is essentially a mini ‘travellator’ or conveyor belt which starts once the integrated sensors detect a bike and automatically stops if the conveyor is completely free of bicycles. The high quality conveyor (kevlar-based) belt runs in a durable, low-maintenance aluminium double-sided channel and is powered by an electric motor. The entrance and exit of the conveyor are aesthetically, functionally and safely integrated into the system, with the electric motor positioned on the side of the conveyor belt.The VeloComfortDown® is a simple and effective non-electric cycle / bike wheeling ramp designed with a gutter brush to reduce the speed of the bike. The gutter brush is made from a high quality, durable and low-maintenance aluminium double-sided channel, which is equipped with brush strip on both sides. The friction of the gutter brush ensures that the bike slows down, allowing the user to determine his/her own pace during the descent.Falco provide complete supply and installation of the VeloComfort® cycle wheeling ramps as well as free rendering graphics to help the client to visualise the scheme, free UK-wide site surveys and free CAD design and schematics.A video demonstrating the VeloComfort® Bike Wheeling Ramp can be viewed by clicking here.For more information about the innovative VeloComfort® Bike Wheeling Ramp, please contact our helpful sales team on 01538 380080.

Products: Flexi light – Flexi Base & Extender frames, Flexi heavy – Ahu Frameworks, Flexi everyday – Duct, pipe and electrical containment. Services: VRF Condensers & Air handling units. Roof build-up: Warm roof design – PIR/PUR insulation with PVC/TPO field membrane. Supplied via a wholesaler in Cardiff, our hot dip galvanised frameworks were supplied in lengths and widths to suit each unit being supported. With all products available from stock, the contractor ordered frameworks in stages, to suit the phased project programme, and eliminated having to find space within an already restricted working environment for everything to be delivered at once.

Even its location is one-of-a-kind: HafenCity Hamburg, on the Strandkai directly along the Elbe River, within sight of the Elbe Philharmonic Concert Hall on one side and the cruise ship terminal on the other. The Marco Polo Terraces are right around the corner. Unilever Germany has built its new corporate headquarters on this striking location of the currently largest inner-city construction project in Europe. The building was designed by Behnisch Architekten from Stuttgart, and it covers 30,000 square metres and sets new standards in a variety of ways.Building technology: HKP Ingenieure GmbHElectrical installation: Bauer Elektroanlagen GmbH HallePhotos: Adam Mørk

The ModernGlide MG100 Top Hung Movable Acoustic Wall provides seamless room dividing options and is ideal for dividing your interior space.Movable Walls Key Facts & Specifications:Acoustic reduction from 37dB to 58dBTop-hung with no floor trackFixing to beam or concrete soffitPanel widths of 650mm to 1250mmHeight up to 12000mmFull height or inset pass door optionsSemi-electric top and bottom seal optionsStacking via single and double point suspensionFinishes include melamine, laminate, veneer, magnetic wipe boardIntegral glazing options30 minute and 1 hour fire rating options