Insulated, secret-fix, flat architectural wall cladding panel system.
Suitable for vertical or horizontal architectural wall cladding applications.
Trimapanel® is a steel insulated, secret-fix, flat architectural wall-cladding panel which is quick and easy to install for fast build times. Available in a range of sizes, shapes and colours and with extensive fabrication options, it offers design flexibility which enables architects to create unique and modern design solutions. Single, double and multi span configurations are available.
Features and benefits:
Trimapanel® carries Grade EXT-B and EXT-A approval by the LPCB. Also fire resistance performance of up to four hours integrity and 15 mins insulation. These are attained by stitching the liner face at 250mm centres.
The internal surface of the panel complies with a Class B s2 d0 rating in accordance with EN 13501-1.
The Trimapanel® system's joint is water-tight up to a pressure of 1050 Pa, which surpasses the relevant standards.
when tested to BS EN 12865‘Hygrothermal performance of building components and building elements’
In accordance with Approved Document L2 (E&W) and Scotland (Technical Handbook Section 6 Energy) tests to EN BS 12114 shows the sealed panel of air leakage as low as 0.48 m³/h/m² at an applied pressure of 50 Pa.
A practical expectation for a finished building, with effective sealing at all junctions, would be 5-10 m³/h/m². However, enhanced detailing practises on large shed buildings can realise air leakage performance figures of less than 3 m³/h/m².
The panel construction offers highly consistent insulation performance, and the site formed junctions provide a practical and effective method of ensuring good thermal performance.
Acoustic performance/ Sound reduction (SRI) weighted values:
Based on a 70 mm core, weighted SRI Rw = 28.9 dB, consult technical literature for further details.
Wide range available.
Colorcoat Prisma® or Colorcoat HPS200 Ultra®.
Pre-coated steel skins/ PIR core.
To suit project requirements.
H43/10 Metal insulating sandwich panel
H43/120 Metal insulating sandwich panel
Carbon steel insulating sandwich panels
Continuity thermal insulation
PIR closed cell foam.
(CFC and HCFC free, zero ODP and GWP <5) to the specification used in LPCB approval.
Using Galvalloy® metallic coating.
Micro-rib (MR) face with tongue and groove edges.
Skin thickness: 0.7 mm.
Hot-dip galvanized steel.
Planked, with tongue and groove edges.
Skin thickness: 0.4mm.
Panel lengths up to 12 m.
Panel internal face
The internal surface of the panel complies with reaction to fire Class B-s2 in accordance with BS EN 13501-1
The system carries Grade EXT-B and EXT-A approved by the LPCB
Contact the technical department for specification details.
15 minutes fire insulation resistance.
240 minutes fire insulation resistance.
Galvalloy® metallic coating.
Hot-dip galvanized steel.
Impact sound reduction
Weighted SRI Rw.
Based on a 70 mm core, consult technical literature for further details.
140 mm (panel joint positions), 50 mm (intermediates).
Colorcoat HPS200 Ultra Colourcard
Colorcoat HPS200 Ultra Technical Brochure
Photovoltaic installation guidelines for industrial and commercial buildings
Acoustic performance of pre-finished steel cladding systems
Structural performance of built-up roof and wall cladding systems
Ensuring consistent appearance of pre-finished steel wall cladding
Refurbishment solutions for non-domestic solutions
The effect of gauge on pre-finished steel roof and wall cladding performance
Creating an air-tight building envelope
Colorcoat Prisma® Colourcard