NBS Source
I'm a manufacturer
Compare variants

TRADELINE Single Frame Resilient Bar Partition Systems Utilising Siniat Board

Verified by manufacturer 5 months ago

RB70-S-76SR(50)

Metsec (voestalpine Metsec) Variant:
Third party certifications:
  • BSI Kitemark

    BSI Kitemark

    Certificate type

  • EPD

    EPD

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

  • UK Conformity Assessed (UKCA)

    UK Conformity Assessed (UKCA)

    Certificate type

TRADELINE Resilient Bar partitions are non-load bearing that achieves high levels of sound insulation.

Jump to:
+44 (0) 121 601 6000 Website

Application

Hotels, residential properties, student accommodation.

Description

TRADELINE Resilient Bar systems are lightweight, non 

load-bearing, friction fit systems. They can be used within 

all sectors.


Due to the inclusion of TRADELINE RB565 

Resilient Bars on one side of the partition create a higher 

level of separation between the C stud and plasterboard 

lining thereby achieving superior levels of sound 

insulation performance.


Designed to give the potential to satisfy acoustic requirements for Part E of the Building regulations. Due to the high reliance on workmanship, we only recommend when the requirement is 43 DnT, w + ctr i.e. material change of 

use, student accommodation, hotels etc.


Sound performance up to 61 RwdB, 90 minutes fire and Severe Duty


Structural performance:

  • Strength grade to BS 5234-2:1992 Annexes A-F.

Fire performance:

  • Fire resistance to BS 476:1987:Part 22.

Acoustic performance:

  • Calculated weighted sound reduction index (Rw) to BS EN ISO 10140-2: 2010.

Installing framing for partitions:

  • Partition height (maximum) calculated based on a limiting deflection of L/240 at 200 Pascals.

General information

Length

Bespoke

Width

148 mm

149 mm

Height

Bespoke

Uniclass

Ss_25_10_30_35 Gypsum board partition systemsPrimary

CAWS

K10/30 Metal stud

K10/125 Metal stud partition system

Product range

Drylining / TRADELINE Drywall Systems
Drylining / Single Frame Partitions - C Stud & Resilient Bar

Specification data - Gypsum board partition systems

Framing

Tradeline 'C' Stud with Resbar, 70 mm.

Insulation

Acoustic partition roll, 50 mm.

Linings

-

Inner layers

Siniat GTEC Plank, 19 mm.

Face layer

Siniat GTEC Standard Board, 12.5 mm.

Fasteners

Tradeline Drywall Screws.

Joint treatment

Tradeline Joint Tape.

Tradeline Paper Joint Tape.

Tradeline Light Weight All Purpose Joint Compound.

Tradeline Metal Corner Tape.

Tradeline Flexible Metal Corner Tape.

Tradeline Scrim Tape.

Tradeline Drywall Self-Adhesive Joint Tape.

System accessories

Tradeline Acoustic Intumescent Sealant.

Tradeline PB24 Partition Brace.

Tradeline FS24 Flat Bracing Strip.

Tradeline ASP19B Plywood Service Support Plates.

Fire resistance

To BS 476:1987:Part 22, 60/ 60 minutes (Integrity/ Insulation).

Partition height

Guidance for specification option:

Insert requirement, maximum 4200 mm (at 600 mm centres). Calculated based on a limiting deflection of L/240 at 200 Pascals.

Nominal thickness

149 mm.

Manufacturer guidance

Optimum system thickness.

Note that if a greater partition thickness is required, this may improve the sound reduction index (Rw) - consult manufacturer for details.

Calculated weighted sound reduction index (Rw)

63 (-4;-10) Rw dB (C;Ctr).

Centres

600 mm.

StrengthGrade

Severe duty.

Head/ Floor channel

Tradeline Standard Track.

Guidance for specification option:

Used for partition heights under 4 m.

Available in 50, 52, 62 or 72 mm wide.

25 mm flange.

Tradeline 32 mm Leg Track.

Guidance for specification option:

Used for partition heights under 4 m.

Available in 52, 62, 72, 94 or 148 mm wide.

32 mm flange.

Tradeline Deep Track.

Guidance for specification option:

Used for partition heights between 4 m and 8 m.

Can be used as a head track where a deflection head of up to 30 mm is needed.

Available in 52, 62, 72, 94 or 148 mm wide.

50 mm flange.

Tradeline Extra Deep Track.

Guidance for specification option:

Used for partition heights between 8 m and 10.2 m.

Can be used as a head track where a deflection head of up to 45 mm is needed.

Available in 72, 94 or 148 mm wide.

70 mm flange.

Standards

To BS 5234-2:1992, BS 476:1987:Part 22, BS EN ISO 10140-2: 2010.

Sustainability data

Third party certifications

Third party certifications

BSI Kitemark

BSI Kitemark

BIM Level 2 Kitemark - For Design and Construction Phase

BSI Kitemark

BSI Kitemark

BSI Kitemark™ for BIM Objects

EPD

EPD

Environmental Product Declaration EPD - Drylining

ISO 9001 Quality Management

ISO 9001 Quality Management

ISO 9001:2015 Quality Management System

UK Conformity Assessed (UKCA)

UK Conformity Assessed (UKCA)

UKCA Declarations of Performance - Drylining

Literature

TRADELINE Partition Systems

TRADELINE Partition Systems

Product Data Sheet - Drylining

Product Data Sheet - Drylining