Verified by manufacturer 3 months ago
ISO 14001 Environmental Management Systems
ISO 45001 Health and Safety Management
ISO 9001 Quality Management
Heavy duty one part flooring adhesive.
Suitable for securing needle punched/ fibre bonded carpets, artificial grass, PVC, latex, polyurethane and rubber backed carpets, vinyl and rubber floorings, in both sheet and tile format.
It can also be applied to Stopgap smoothing underlayment's, sound, smooth subfloors of concrete, granolithic, sand/ cement screeds and plywood.
A single pack, fibre-reinforced moisture curing heavy duty flooring adhesive.
It is water-resistant and suitable for outdoor use, however, it is not intended to be used as or as a substitute for a surface damp proof membrane.
Features and benefits:
Refer to the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.
For installation onto non-absorbent subfloors, contact our Technical Service Department.
M50/10 Resilient floor tiling
M50/110 Resilient floor tiling
Open time (minimum)
20–30 minutes depending on temperature, humidity and absorbency of the subfloor.
Trowelled - Consult manufacturer for details and insert requirements.
1.8–3.3 kg/m² (dependent on application).
Initial set from 90 minutes; full cure 24 hours.
Contains Red List materials
Country of material origin
Country of product manufacture
A1-A3 (production stage) as defined in BS EN 15804
Styccobond F41 - Flooring Adhesive
Styccobond F44 - Flooring Adhesive
Styccobond F45 - Flooring Adhesive
Styccobond F46 - Flooring Adhesive
Styccobond F47 - Flooring Adhesive
Styccobond F48 Plus - Flooring Adhesive
Styccobond F49 Hybrid PS - Flooring Adhesive
Styccobond F57 - Flooring Adhesive
Styccobond F58 PLUS - Flooring Adhesive