Compare

SPEEDLINE Single Frame Resilient Bar Partition Systems Utilising British Gypsum Board

Name: SPEEDLINE Single Frame Resilient Bar Partition Systems Utilising British Gypsum Board
Brand: Metsec (voestalpine Metsec)
SKU: nKCJBwFvFwU9wUH9pqxMUc

Verified by manufacturer 3 months ago

RB70-B-59(50)

Metsec (voestalpine Metsec)

Third party certifications:

BSI Kitemark
Certificate type
EPD
Certificate type
ISO 9001 Quality Management
Certificate type
UK Conformity Assessed (UKCA)
Certificate type

Plasterboard partition system.

Jump to:

+44 (0) 121 601 6000 Website

Application

Hotels, residential properties, student accommodation.

Description

Plasterboard single frame resilient bar partition system.

Structural performance:

Strength grade to BS 5234-2:1992 Annexes A-F.

Fire performance:

Fire resistance to BS 476:1987:Part 22.

Acoustic performance:

Calculated weighted sound reduction index (Rw) to BS EN ISO 10140-2: 2010.

Installing framing for partitions:

Partition height (maximum) calculated based on a limiting deflection of L/240 at 200 Pascals.

General information

Length	Bespoke
Width	138 mm 148 mm 170 mm
Height	Bespoke

Uniclass	Ss_25_10_30_35 Gypsum board partition systemsPrimary
CAWS	K10/30 Metal stud K10/125 Metal stud partition system

Product range	Drylining / SPEEDLINE Drywall Systems Drylining / Single Frame Partitions - C Stud & Resilient Bar

Specification data - Gypsum board partition systems

Framing	Speedline 70 mm 'C' Stud with Speedline Resbar on one side only.
Insulation	Acoustic partition roll, 50 mm.
Linings	-
Inner layers	British Gypsum Gyproc SoundBloc, 12.5 mm.
Outer layers	British Gypsum Gyproc SoundBloc, 12.5 mm.
Fasteners	Speedline Drywall Screws.
Joint treatment	Speedline Drywall Fibreglass Tape. Speedline Ready Mix Joint Compound. Speedline Corner Bead Tape.
System accessories	Speedline Fire Rated Acoustic Sealant. Speedline PB24 Partition Brace. Speedline FS24 Flat Bracing Strip. Speedline Service Support Plate. Speedline Putty Pads.

Fire resistance	To BS 476:1987:Part 22, 60/ 60 minutes (Integrity/ Insulation).
Partition height	Guidance for specification option: Insert requirement, maximum 4000 mm (at 600 mm centres). Calculated based on a limiting deflection of L/240 at 200 Pascals.
Nominal thickness	138 mm. Manufacturer guidance Optimum system thickness. Note that if a greater partition thickness is required, this may improve the sound reduction index (Rw) - consult manufacturer for details.
Calculated weighted sound reduction index (Rw)	59 (-2;-7) Rw dB (C;Ctr). Guidance for specification option: Based on the nominal system thickness.
Centres	600 mm.
StrengthGrade	Severe duty.
Head/ Floor channel	Speedline Standard Track. Guidance for specification option: Used for partition heights under 4 m. Available in 50, 52, 62 or 72 mm wide. 25 mm flange. Speedline 32 mm Leg Track. Guidance for specification option: Used for partition heights under 4 m. Available in 52, 62, 72, 94 or 148 mm wide. 32 mm flange. Speedline Deep Track. Guidance for specification option: Used for partition heights between 4m and 8m. Can be used as a head track where a deflection head of up to 30 mm is needed. Available in 52, 62, 72, 94 or 148 mm wide. 50 mm flange. Speedline Extra Deep Track. Guidance for specification option: Used for partition heights between 8m and 10.2 m. Can be used as a head track where a deflection head of up to 45mm is needed. Available in 72, 94 or 148 mm wide. 70 mm flange.
Standards	To BS 5234-2:1992 Annexes A-F, BS 476:1987:Part 22, BS EN ISO 10140-2: 2010.