Compare

SPEEDLINE Single Frame Partition Systems Utilising Knauf Wallboard

Name: SPEEDLINE Single Frame Partition Systems Utilising Knauf Wallboard
Brand: Metsec (voestalpine Metsec)
SKU: aVeJaAANaEdFMTAKnrM6TG

Verified by manufacturer 4 months ago

50-K-51

Metsec (voestalpine Metsec)

Third party certifications:

BSI Kitemark
Certificate type
EPD
Certificate type
ISO 9001 Quality Management
Certificate type
UK Conformity Assessed (UKCA)
Certificate type

An economical friction-fit system to assemble frames for strong, compact and lightweight non load‑bearing partition.

Jump to:

+44 (0) 121 601 6000 Website

Application

Sectors:

Residential.
Offices.
Healthcare.
Education.
Commercial.
Retail.
RMI.
Student accommodation.

Description

An economical friction-fit system to assemble frames for strong, compact, lightweight-non load‑bearing partitions, Speedline Partitioning Systems are suitable for use in domestic and commercial situations.

Features and benefits:

Quick to erect, lightweight and clean.
Metal stud is dimensionally accurate and will not twist or bow.
Range of stud widths – 50, 70, 92 and 146 mm to meet different performance requirements.
Services are easy to install.
Acoustic insulation can easily be installed to uprate sound insulation.
Easy to cut to length using tin snips.
Frames easily fit together.
Door frames simply formed.
Range of UKAS accredited tests available for Fire (30-120 mins.) and Acoustics (37-60 dB).

Structural performance:

Strength grade to BS 5234-2:1992 Annexes A-F.

Fire performance:

Fire resistance to BS 476:1987:Part 22.

Acoustic performance:

Calculated weighted sound reduction index (Rw) to BS EN ISO 10140-2: 2010.

Installing framing for partitions:

Partition height (maximum) calculated based on a limiting deflection of L/240 at 200 Pascals.

General information

Length	Bespoke
Width	77 mm 82 mm 97 mm 102 mm 112 mm 119 mm 122 mm 124 mm 132 mm 142 mm 154 mm 173 mm 178 mm 198 mm 208 mm Show more
Height	Bespoke

Uniclass	Ss_25_10_30_35 Gypsum board partition systemsPrimary
CAWS	K10/30 Metal stud K10/125 Metal stud partition system

Product range	Drylining / Single Frame Partitions - C Stud Drylining / SPEEDLINE Drywall Systems

Specification data - Gypsum board partition systems

Framing	Speedline 'C' Stud, 50 mm.
Linings	-
Outer layers	Knauf Wallboard, 12.5 mm.
Fasteners	Speedline Drywall Screws.
Joint treatment	Speedline Drywall Fibreglass Tape. Speedline Ready Mix Joint Compound. Speedline Corner Bead Tape.
System accessories	Speedline Fire Rated Acoustic Sealant. Speedline PB24 Partition Brace. Speedline FS24 Flat Bracing Strip. Speedline Service Support Plate. Speedline Putty Pads.

Fire resistance	To BS 476:1987:Part 22, 30/ 30 minutes (Integrity/ Insulation).
Partition height	Guidance for specification option: Insert requirement based on centres specified. 600 mm centres: maximum 2500 mm. 400 mm centres: maximum 2800 mm. 300 mm centres: maximum 2900 mm. Calculated based on a limiting deflection of L/240 at 200 Pascals.
Nominal thickness	77 mm. Manufacturer guidance Optimum system thickness. Note that if a greater partition thickness is required, this may improve the sound reduction index (Rw) - consult manufacturer for details.
StrengthGrade	Medium duty.
Centres	600 mm. Guidance for specification option: Allows for greater maximum partition heights. 400 mm. Guidance for specification option: Allows for greater maximum partition heights. 300 mm. Guidance for specification option: Standard.
Head/ Floor channel	Speedline Standard Track. Guidance for specification option: Used for partition heights under 4 m. Available in 50, 52, 62 or 72 mm wide. 25 mm flange. Speedline 32 mm Leg Track. Guidance for specification option: Used for partition heights under 4 m. Available in 52, 62, 72, 94 or 148 mm wide. 32 mm flange. Speedline Deep Track. Guidance for specification option: Used for partition heights between 4m and 8m. Can be used as a head track where a deflection head of up to 30 mm is needed. Available in 52, 62, 72, 94 or 148 mm wide. 50 mm flange. Speedline Extra Deep Track. Guidance for specification option: Used for partition heights between 8m and 10.2 m. Can be used as a head track where a deflection head of up to 45mm is needed. Available in 72, 94 or 148 mm wide. 70 mm flange.