Verified by manufacturer 2 months ago
SE60-S-1956
BES 6001
Certificate type
BSI Kitemark
Certificate type
EPD
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
ISO 9001 Quality Management
Certificate type
UK Conformity Assessed (UKCA)
Certificate type
A high performance fire protection system to enclose lift shafts and service rises.
Sectors:
A high performance fire protection system to enclose lift shafts and service rises.
The Speedline Shaft Encasement System allows installation to take place from the landing side only.
This system is non-load-bearing and designed to fit between structural floors.
Features and benefits:
Structural performance:
Fire performance:
Acoustic performance:
Installing framing for partitions:
Length | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | K10/125 Metal stud partition system K10/30 Metal stud |
Product range |
Framing | Speedline 'I' Stud, 60 mm. |
Linings | |
Inner layers | Siniat GTEC Fire CoreBoard, 19 mm.Guidance for specification option: Secured in-between Speedline 'I' stud at 600 mm centres. |
Outer layers | Siniat GTEC Fire Board, 15 mm. |
Fasteners | Speedline Drywall Screws. |
Joint treatment | Speedline Drywall Fibreglass Tape.Speedline Ready Mix Joint Compound.Speedline Putty Pads.Speedline Corner Bead Tape. |
System accessories | Speedline Fire Rated Acoustic Sealant.Speedline PB24 Partition Brace.Speedline FS24 Flat Bracing Strip.Speedline Service Support Plate.Speedline Putty Pads. |
Fire resistance | To BS 476-22:1987, 60/ 60 minutes from shaft side (Integrity/ Insulation). 60 minutes integrity only from landing side. |
Partition height | Guidance for specification option: Insert requirement, maximum 3800 mm. Maximum based on 600 mm centres and calculated based on a limiting deflection of L/240 at 200 Pascals. |
Calculated weighted sound reduction index (Rw) | 39 Rw dB. Guidance for specification option: Based on the optimum system thickness. |
Centres | 600 mm. |
StrengthGrade | Heavy duty. |
Head/ Floor channel | Speedline Standard Track. Guidance for specification option: Used for partition heights under 4 m. Available in 50, 52, 62 or 72 mm wide. 25 mm flange. Speedline 32 mm Leg Track. Guidance for specification option: Used for partition heights under 4 m. Available in 52, 62, 72, 94 or 148 mm wide. 32 mm flange. Speedline Deep Track. Guidance for specification option: Used for partition heights between 4m and 8m. Can be used as a head track where a deflection head of up to 30 mm is needed. Available in 52, 62, 72, 94 or 148 mm wide. 50 mm flange. Speedline Extra Deep Track. Guidance for specification option: Used for partition heights between 8m and 10.2 m. Can be used as a head track where a deflection head of up to 45mm is needed. Available in 72, 94 or 148 mm wide. 70 mm flange. |
BES 6001
BES 6001 Responsible Sourcing of Construction Products
BSI Kitemark
BIM Level 2 Kitemark - For Design and Construction Phase
BSI Kitemark
BSI Kitemark™ for BIM Objects
EPD
Environmental Product Declaration EPD - Drylining
ISO 14001 Environmental Management Systems
ISO 14001:2015 Environmental Management System
ISO 9001 Quality Management
ISO 9001:2015 Quality Management System
UK Conformity Assessed (UKCA)
UKCA Declarations of Performance - Drylining
SPEEDLINE Shaft Encasement Systems Utilising British Gypsum Board
SPEEDLINE Shaft Encasement Systems Utilising Knauf Board
SPEEDLINE Single Frame Acoustic Stud Partition Systems Utilising British Gypsum Board
SPEEDLINE Single Frame Acoustic Stud Partition Systems Utilising Knauf Board
SPEEDLINE Single Frame Acoustic Stud Partition Systems Utilising Siniat Board
SPEEDLINE Single Frame Partition Systems Utilising British Gypsum Duraline
SPEEDLINE Single Frame Partition Systems Utilising British Gypsum FireLine
SPEEDLINE Single Frame Partition Systems Utilising British Gypsum SoundBloc
SPEEDLINE Single Frame Partition Systems Utilising British Gypsum WallBoard
SPEEDLINE Single Frame Partition Systems Utilising Knauf Fire Panel