Verified by manufacturer 2 months ago
Solar Green Roof FKD
Solar mounting supported by the green roof to increase biodiversity.
-For extensive green roofs.
-Also suitable for inverted roofs.
-No roof penetration is required for installation.
The combination of photovoltaics and green roofs on the Optigrün Solar Green Roof combines many advantages. The evaporative cooling of the vegetation leads to an increase in the efficiency of the photovoltaic system. At the same time, the green roof makes an important contribution to maintaining the natural water balance and increasing biodiversity.
Optigrün's load-bearing solar mounts are fixed in position and secured against wind suction by the green roof structure. No roof penetration is required for installation. The solar mounts can be combined with various system structures and enable multifunctional roof use.
Features and benefits:
Solar Green Roof FKD:
Solar Green Roof WRB:
Solar Green Roof SOLon:
Color | Green Brown Black Other |
Finish | Natural |
Material | Vegetation Plastic Fleece |
Shape | Square Rectangle Other |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | V90/312 Photovoltaic systems Q37/130 Extensive green roof |
Protection | |
Protection layer | Protection and storage fleece RMS 500.Guidance for specification option:
|
Moisture control | |
Drainage layer | Drainage and storage board FKD 25.Guidance for specification option:
|
Filter membrane | Filter fleece FIL 150.Guidance for specification option:
|
Planting systems | |
Planting medium | Extensive substrate. |
Planting requirements | Sedum cuttings. |
Fire breaks | Manufacturer guidanceConsult manufacturer for details and insert requirements or omit. |
Edge restraints | Manufacturer guidanceConsult manufacturer and insert requirements.
|
Photovoltaic panel | Photovoltaic module. Guidance for specification option: As specified, insert requirements. |
Mounting | Solar mounting frame solar FKD 25MA Guidance for specification option: Load-supported solar mounting support consisting of base plate, bracket and drainage and storage board FKD 25MA. |
Weight | 110 kg/m² (1.1 kN/m²). Manufacturer guidanceSystem solution including mounting frames and PV modules. The weight of the material varies from region to region. The weight information refers to the water-saturated state; the dry weight is approximately 60–70% of this. |
Depth | From 80 mm. |
Roof pitch | 0-5°. |
Discharge | Cs = 0.4-0.5. Manufacturer guidanceDischarge coefficient in accordance with the current FLL Green Roof Guidelines. |
System accessories | Manufacturer guidanceSystem add-ons available. Consult manufacturer for details and insert requirements. |
Country of material origin | Europe |
Country of product manufacture | Europe |
Material | Vegetation Plastic Fleece |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | Manufacturer guidanceRMS 300 Specific properties - 100% recycled plastic fibre (PP/PES/acrylic) FKD 25MA - 100% recycled HDPE |