Summary
Solar mounting supported by the green roof to increase biodiversity.
Solar mounting supported by the green roof to increase biodiversity.
Solar mounting supported by the green roof to increase biodiversity.
Application
-For extensive green roofs.
-Also suitable for inverted roofs.
-No roof penetration is required for installation.
-For extensive green roofs.
-Also suitable for inverted roofs.
-No roof penetration is required for installation.
-For extensive green roofs.
-Also suitable for inverted roofs.
-No roof penetration is required for installation.
Description
The combination of photovoltaics and green roofs on the Optigrün Solar Green Roof combines many advantages. The evaporative cooling of the vegetation leads to an increase in the efficiency of the photovoltaic system. At the same time, the green roof makes an important contribution to maintaining the natural water balance and increasing biodiversity.
Optigrün's load-bearing solar mounts are fixed in position and secured against wind suction by the green roof structure. No roof penetration is required for installation. The solar mounts can be combined with various system structures and enable multifunctional roof use.
Features and benefits:
- Sustainable power generation with solar energy.
- Flood protection and relief of the sewerage system - preservation of the natural water balance.
- Green areas provide habitats instead of dead sealed surfaces.
- Improving quality of life and active health protection.
Solar Green Roof FKD:
- Load-supported solar mounting support.
- Roof penetration-free fastening of PV modules thanks to combination with the green roof.
- East-west orientation possible.
- Integration of the solar mounting support into the Drainage and Storage Board.
- Yield increase for the photovoltaics system.
- High mounting support to prevent shading of the PV modules by vegetation.
- Plant growth also underneath the modules.
- Low weight of the system structure.
- Also suitable for inverted roofs.
Solar Green Roof WRB:
- Load-supported solar mounting support.
- Integration of the solar mounting support into the Water Retention Box (WRB).
- High water retention and water discharge delay.
- Roof penetration-free fastening of PV modules thanks to combination with the green roof.
- East-west orientation possible.
- Yield increase for the photovoltaics system.
- High mounting support to prevent shading of the PV modules by vegetation.
- Plant growth also underneath the modules.
- Low weight of the system structure.
- Also suitable for inverted roofs.
Solar Green Roof SOLon:
- High electricity yield, comparable with a conventional solar green roof.
- High-quality double-glazed modules with high bifacial coefficient and hail protection.
- Retrofitting on existing green roofs possibl.
- Very low weight of 12-22 kg/m².
- Cohesive system, secured against shifting as a result of wind pressure, no occurrence of wind suction.
- Consistent supply of light and water to the vegetation. The green roof can develop unhindered.
- Maintenance can easily be carried out on the green roof.
- Integrated cable management.
- Very simple, quick installation.
- Certified in accordance with IEC 61215, IEC 61730, IEC 61701, IEC TS 62804 (module safety and reliability).
The combination of photovoltaics and green roofs on the Optigrün Solar Green Roof combines many advantages. The evaporative cooling of the vegetation leads to an increase in the efficiency of the photovoltaic system. At the same time, the green roof makes an important contribution to maintaining the natural water balance and increasing biodiversity.
Optigrün's load-bearing solar mounts are fixed in position and secured against wind suction by the green roof structure. No roof penetration is required for installation. The solar mounts can be combined with various system structures and enable multifunctional roof use.
Features and benefits:
- Sustainable power generation with solar energy.
- Flood protection and relief of the sewerage system - preservation of the natural water balance.
- Green areas provide habitats instead of dead sealed surfaces.
- Improving quality of life and active health protection.
Solar Green Roof FKD:
- Load-supported solar mounting support.
- Roof penetration-free fastening of PV modules thanks to combination with the green roof.
- East-west orientation possible.
- Integration of the solar mounting support into the Drainage and Storage Board.
- Yield increase for the photovoltaics system.
- High mounting support to prevent shading of the PV modules by vegetation.
- Plant growth also underneath the modules.
- Low weight of the system structure.
- Also suitable for inverted roofs.
Solar Green Roof WRB:
- Load-supported solar mounting support.
- Integration of the solar mounting support into the Water Retention Box (WRB).
- High water retention and water discharge delay.
- Roof penetration-free fastening of PV modules thanks to combination with the green roof.
- East-west orientation possible.
- Yield increase for the photovoltaics system.
- High mounting support to prevent shading of the PV modules by vegetation.
- Plant growth also underneath the modules.
- Low weight of the system structure.
- Also suitable for inverted roofs.
Solar Green Roof SOLon:
- High electricity yield, comparable with a conventional solar green roof.
- High-quality double-glazed modules with high bifacial coefficient and hail protection.
- Retrofitting on existing green roofs possibl.
- Very low weight of 12-22 kg/m².
- Cohesive system, secured against shifting as a result of wind pressure, no occurrence of wind suction.
- Consistent supply of light and water to the vegetation. The green roof can develop unhindered.
- Maintenance can easily be carried out on the green roof.
- Integrated cable management.
- Very simple, quick installation.
- Certified in accordance with IEC 61215, IEC 61730, IEC 61701, IEC TS 62804 (module safety and reliability).
The combination of photovoltaics and green roofs on the Optigrün Solar Green Roof combines many advantages. The evaporative cooling of the vegetation leads to an increase in the efficiency of the photovoltaic system. At the same time, the green roof makes an important contribution to maintaining the natural water balance and increasing biodiversity.
Optigrün's load-bearing solar mounts are fixed in position and secured against wind suction by the green roof structure. No roof penetration is required for installation. The solar mounts can be combined with various system structures and enable multifunctional roof use.
Features and benefits:
- Sustainable power generation with solar energy.
- Flood protection and relief of the sewerage system - preservation of the natural water balance.
- Green areas provide habitats instead of dead sealed surfaces.
- Improving quality of life and active health protection.
Solar Green Roof FKD:
- Load-supported solar mounting support.
- Roof penetration-free fastening of PV modules thanks to combination with the green roof.
- East-west orientation possible.
- Integration of the solar mounting support into the Drainage and Storage Board.
- Yield increase for the photovoltaics system.
- High mounting support to prevent shading of the PV modules by vegetation.
- Plant growth also underneath the modules.
- Low weight of the system structure.
- Also suitable for inverted roofs.
Solar Green Roof WRB:
- Load-supported solar mounting support.
- Integration of the solar mounting support into the Water Retention Box (WRB).
- High water retention and water discharge delay.
- Roof penetration-free fastening of PV modules thanks to combination with the green roof.
- East-west orientation possible.
- Yield increase for the photovoltaics system.
- High mounting support to prevent shading of the PV modules by vegetation.
- Plant growth also underneath the modules.
- Low weight of the system structure.
- Also suitable for inverted roofs.
Solar Green Roof SOLon:
- High electricity yield, comparable with a conventional solar green roof.
- High-quality double-glazed modules with high bifacial coefficient and hail protection.
- Retrofitting on existing green roofs possibl.
- Very low weight of 12-22 kg/m².
- Cohesive system, secured against shifting as a result of wind pressure, no occurrence of wind suction.
- Consistent supply of light and water to the vegetation. The green roof can develop unhindered.
- Maintenance can easily be carried out on the green roof.
- Integrated cable management.
- Very simple, quick installation.
- Certified in accordance with IEC 61215, IEC 61730, IEC 61701, IEC TS 62804 (module safety and reliability).
Color
Green, Brown, Black, Other
Green, Brown, Black, Other
Green, Brown, Black, Other
Finish
Natural
Natural
Natural
Material
Vegetation, Plastic, Fleece
Vegetation, Plastic, Fleece
Vegetation, Plastic, Fleece
Shape
Square, Rectangle, Other
Square, Rectangle, Other
Square, Rectangle, Other
Length
Bespoke
Bespoke
Bespoke
Width
Bespoke
Bespoke
Bespoke
Height
Bespoke
Bespoke
Bespoke
Specification
Classification data
Protection
-
-
-
Protection layer
Protection and storage fleece RMS 500.
Protection and storage fleece RMS 500.
Protection and storage fleece RMS 300., Other.
Moisture control
-
-
-
Drainage layer
Drainage and storage board FKD 25.
Water Retention Box WRB 80F.
Drainage and storage board FKD 25., Other.
Filter membrane
Filter fleece FIL 150.
Suction and capillary fleece RMS 500K.
Filter fleece FIL 150., Other.
Planting systems
-
-
-
Planting medium
Extensive substrate.
Extensive substrate.
Extensive substrate.
Planting requirements
Sedum cuttings.
Sedum cuttings.
Sedum cuttings.
Drainage ancillaries
-
Flow control system.
-
Additional properties
Photovoltaic panel
Photovoltaic module.
Photovoltaic module.
Vertically mounted photovoltaic module.
Mounting
Solar mounting frame solar FKD 25MA
Solar mounting support WRB 80FMA.
Aluminium mounting frame and recycled plastic ballast feet.
Weight
110 kg/m² (1.1 kN/m²).
120 kg/m² (1.2 kN/m²).
12–22 kg/m².
Depth
From 80 mm.
From 140 mm.
62 cm from top edge of substrate.
Roof pitch
0-5°.
0°.
-
Discharge
Cs = 0.4-0.5.
-
-
Sustainability data
Country of material origin
Europe
Europe
Europe
Country of product manufacture
Europe
Europe
Europe
Material
Vegetation, Plastic, Fleece
Vegetation, Plastic, Fleece
Vegetation, Plastic, Fleece