• Toilet cubicles with a WC toilet pan.
  • Airports.
  • Commercial spaces.
  • Football grounds.
  • High quality offices.
  • Hotels.
  • Leisure areas/ clubs.
  • Schools.
  • Theatres.


Fully pre-fabricated, unique, hinged access panel module up to 3000 mm high and in a maximum width of 1000 mm, manufactured in the UK using Aluminium Alloy 6063T6. Overall depth from the rear of the framework to front face of panel is 82 mm. The system offers corrosion resistance to moisture, but is not designed to prevent water penetration. The system is suitable for use inside toilet cubicles with a WC toilet pan, to house urinals or wash-hand basins, or as wall lining. It can be used on a back wall or in a back-to-back layout.

Features and benefits:

  • Factory-prefabricated access panel system.
  • Full aluminium framework.
  • Hinged access doors.
  • Doors secured by catches.

General information




Up to 3000 mm high and 1000 mm wide.



Ten years

Uniclass 2015

Ss_25_25_45_25 Duct and wall panel lining systemsPrimary


K32/150 Duct/ wall linings – panels and proprietary frames

K32/15 Duct/ wall lining panels

Specification data - Duct and wall panel lining systems Enhanced data



Supporting frame


Duct panels

Full aluminium frame using Aluminium Alloy 6063T6, factory-assembled using extruded vertical posts and horizontal cross-rails, manufactured to bespoke width and height and supported by 12 mm diameter zinc-plated carbon steel adjustable feet. Frame locates into floor and ceiling channel and is braced to the back wall with aluminium angle to a specified distance (standard is 300 mm to the face of the panels). This framework fully supports the module, and no other elements are required to enable the fitting of the system.

Product Reference

Sentry Veneer Access Module


Up to 3000 mm high and 1000 mm wide.


Infill panels

The infills form an integral part of the framework, consisting of vertical infills, a head infill and skirting, creating required shadow gaps/ clearances to the vertical edge of the panels and at the floor and ceiling. 17 mm finished thickness consisting of 15 mm moisture-resistant MDF core, sourced from sustainable forests, and faced with wood veneer with balancing backing laminate. Alternatively, WBP plywood can be supplied as skirting to accept finishes by others, such as tiling/ vinyl. When fitted prior to the finished ceiling, the head infill can sit above the level of the ceiling, with the ceiling then subsequently fitted to the face of the head infill. Alternatively, if the ceiling is fitted first, the head infill can be scribed to the underside of the ceiling. The system has standard shadow gaps of 16 mm to the centre and 25 mm to side walls. These can be reduced to suit a particular requirement by using alternative hardware.


Access panels are factory-fitted to framework, using adjustable zinc alloy die-cast hinges and fastened using zinc alloy die-cast locating catches. Panel accessed using supplied injection-moulded key.

Access panel

17 mm finished thickness consisting of a 15 mm moisture-resistant chipboard/ MDF core, sourced from sustainable forests. Panels are edged first, before being faced with wood veneer, with balancing backing laminate. The standard configuration allows for three panels per module, although this can be varied to suit a particular application. Cut-outs for the sanitaryware are undertaken on site, to allow for flexibility/ tolerance. Additional cut-outs for other accessories are possible.

Not required.

15 mm moisture-resistant chipboard core.

15 mm moisture-resistant MDF core.


Insert requirements from manufacturer's selection.



Thrislington Product Summary - Sentry Ducting

Thrislington Product Summary - Sentry Ducting

Similar products from Thrislington Cubicles

Hung Compact Grade Laminate Access Panel

Hung Laminate Access Panel

Sentry Aluminium Access Module

Sentry Compact Grade Laminate Access Module

Sentry Glass Access Module

Sentry Laminate Access Module

Sentry Stainless Steel Access Module