RiserSafe® Solo Plus - Modular Riser Flooring
Verified by manufacturer 15 hours ago
A modular flooring system for smaller riser openings in multi-storey buildings.
Application
RiserSafe Solo Plus is suitable for in-situ concrete slabs.
Description
RiserSafe® Solo Plus is a low-cost modular riser flooring system for repetitive floor slab penetrations ranging from 200 x 200 mm to 400 x 800 mm to take between one and three M&E services.
Features and benefits:
- Offsite manufacture.
- No formwork.
- Immediate fall protection.
- Passive and permanent fire barrier.
- Sliding soaker plates for pipe installation tolerance.
- Two position floor plate.
- Formwork for 100 mm fire compound (if required).
- Features flush, removable three-piece checker top plate.
- Patented sliding bottom plates to allow for service installation tolerances.
- Accommodates 162 mm, 112 mm and 75 mm pipework as standard.
General information
Color | Red Guidance for specification option: Durbar plates red oxide primed. Grey |
Finish | Primed Galvanized |
Material | Steel |
Shape | Rectangle Square Trapezoid Triangle Other |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | Lifetime |
Uniclass | |
CAWS | E20/70 Formwork E60/210 Floor E20/225 Permanent formwork for suspended floors E20/145 Permanent formwork E20/230 Modular riser flooring units |
Specification data - Modular riser flooring units
Classification data | |
Certification | UKCA, FORS gold standard. |
Plate | 6 mm thick durbar floor plates, shot blasted and red oxide primed (26–30 µm thick). Guidance for specification option:
|
Frame | Perforated galvanized steel frame. Guidance for specification option: The perforated walls allow concrete grout to permeate through to provide a non-scabble key for concrete or fire compounds. |
Size | As drawings. Guidance for specification option: Insert reference. The system is for slab penetrations ranging from 200 x 200 mm to 400 x 800 mm. |
Additional supports | |
Size | Not required. Guidance for specification option: Beams are usually not employed as the riser opening is to small to need a supporting RHS beam. Required. Guidance for specification option: Where a supporting RHS beam is required, insert requirements:
Both options are steel, shot blasted and red oxide primed (26–30 µm-thick). |
Fixings | Floor plates: Fixed with 5/16 hex head 5.5 x 38 mm tek screws - refer to supplier's drawings. |
Prepared openings | As drawings. Guidance for specification option: Insert reference. Cover plates over the top of the service penetrations pre-cut in the floor plates of the RiserSafe system. The temporary hole protection is part of the unit and only removed when services are being installed. |
Fire-stopping | Not required. Intumescent compound. |
Integral accessories | Soaker plate (mechanical and electrical). |
Options | None. Alternate sliding plate. Guidance for specification option: Can be supplied with an alternate sliding plate for any size/ shape service. Corner application. Guidance for specification option: Corner application option e.g. two shear walls. |
Reaction to fire | To EN 13501-1, Class A1 (non-combustible). Guidance for specification option: Up to 1000°C for 90 minutes. |
Safe Working Load | 2.5 kN/m² UDL. |
Tolerances | +/-5 mm manufacturing tolerance. |
Brackets | Manufacturer's standard. Manufacturer guidanceBrackets are included as part of the RiserSafe® system. Refer to the manufacturer's literature for details. Please note, Ambar Kelly does not supply Halfen channels and fixings. |
Verification | Submittals: Drawings of all prefabricated modular riser flooring units, in PDF and DWG formats, showing dimensions and layout, safe working load, and safety-critical installation steps, and a 3D model of the permanent maintenance modular riser flooring units. Manufacturer guidanceAmbar Kelly provides coordinated drawings at scales suitable for review, coordination, and fabrication. Drawings are compliant with Common Data Environment (CDE) naming conventions. Ambar Kelly coordinates directly with Architectural, Structural, and MEP (Mechanical, Electrical, and Plumbing) contractors, incorporating their RVT/IFC models. Ambar Kelly provides an Autodesk Revit tool (templates, families, or plugins as required) for the modular riser flooring unit to the design team, enabling them to design interface details with structural elements, MEP services, and fire compartmentation requirements (both horizontal and vertical). |
Timing | Drawings: Submit before fabrication. 3D model: Submit before integration into the federated model. |
Sustainability data
Country of product manufacture | United Kingdom |
Material | Steel |
| Carbon dioxide equivalent | |
Carbon dioxide equivalent, as defined in BS EN 15804 Self-declared | |
Stage Normalised unit (kg CO₂ eq/kg) Declared unit (kg CO₂ eq/kg) Stage:A1–A3 ('Production stage') Normalised unit : 2.84 (kg CO₂ eq/kg) Declared unit : 2.84 | |
Recyclability | 98% |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 80 % Guidance for specification option: Depending on the steel used, up to 80% recycled content. |
BIM objects
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 2 |
Literature
RiserSafe Solo Plus - Tec Data Sheet
CPD materials
Riser Shafts - How to Avoid Failure
Similar products from Ambar Kelly Ltd
Riser Safe® - Building Riser - Post Tension Concrete Frame - Riser Flooring
Riser Safe® - Building Riser - Retrofit Flat Pack
RiserSafe® - Building Riser - Concrete Frame - Modular Riser Flooring - Concrete frame
RiserSafe® - Building Riser - Pre-cast Concrete Planks
RiserSafe® - Building Riser - Steel Frame - Modular Riser Flooring - Steel Frame
RiserSafe® Clamshell