NBS Source
I'm a manufacturer

Pro Void Vent 25 - Gas Dispersal Layer

Verified by manufacturer 4 months ago

Delta Membrane Systems Ltd

Gas dispersal layer made up of a cuspated HDPE core with a geotextile filter/ separator bonded to a single side

Jump to:
BOS
+44 (0)1992 523523 Website

Application

Intended use is to provide a means of ventilation when used in conjunction with an approved Gas Protection Barrier, in accordance with the recommendation(s) contained within NHBC Guidance and BS 8485:2015.

Description

A gas dispersal layer made up of a cuspated HDPE core with a geotextile filter/separator bonded to a single side supplied in rolls.


Features and benefits:

  • Optimized for maximum strength and performance.
  • Providing high levels of air and or gas flow complying with the latest codes of practice, as published by BRE, CIRIA and NHBC.
  • PRO VOID VENT 25 is independently tested and verified by UKAS accredited bodies.
  • Gas venting mat.
  • Optimised for strength and gas flow.
  • Easy to lay.
  • Handling: Roll weights can be between 50 and 100 kg hence appropriate equipment is required for unloading and handling.
  • Storage: supplied in packaging designed to protect product from damage during handling and degradation as a result of UV exposure. Product should be kept in supplied packing until time of installation.
  • Refer to specific Void Vent installation guidance.
  • Detailed assistance is available from Delta Membrane Systems Ltd.

General information

Color

Black

Grey

Material

High density polyethylene (HDPE)

Guidance for specification option:

Does not support bacterial growth and is highly resistant to acids and alkalis.

Shape

Rectangle

Guidance for specification option:

Supplied as a roll.

Length

50000 mm

Width

900 mm

Height

27 mm

Warranty description

60 year

Uniclass

Pr_25_57_51_36 High-density polyethylene (PE-HD) studded sheetsPrimary

CAWS

J42/395 Air and vapour control layer

H92/450 Air and vapour control layer

H30/30 Air and vapour control membrane

H31/261 Air and vapour control membrane

H31/45 Air and vapour control membrane

H30/261 Air and vapour control membrane

Specification data - High-density polyethylene (PE-HD) studded sheets

Standard

To BS 8485:2015 + A1:2019.

Filter layer

Geotextile.

Sheet thickness

27 mm.

Weight (minimum)

50–100 g/m².

Guidance for specification option:

Gross 60 kg per roll as supplied. Can be 50–100 kg.

Colour

Black/ grey.

Performance characteristics

-

Flow rate

5.0 L/s/m.

Guidance for specification option:

To EN ISO 12958, 200 kPa, (i)=1 (composite).


Permeability (H50) geotextile: 100 (-20) L/m²/s.

Gas flow capacity (composite): 0.024 m³/s.

  • Calculated based on a discharge coefficient of 0.61 with a pressure difference of 10 Pa and a standard air density of 129 kg/m³.

Purpose

Vapour control layer.

Tensile strength (minimum)

To EN ISO 10319 (MD/CMD): 20/15 (-2.0/-1.5) kN/m.

Roll size

50 x 0.9 m.

Typical compressive strength

300 kPa.

Performance characteristics

CBR puncture resistance: 14 (-0.14) kN.
Pore size (O90) geotextile: 80 (±20) µm.

Sustainability data

Contains Red List materials

No

Material

High density polyethylene (HDPE)

Guidance for specification option:

Does not support bacterial growth and is highly resistant to acids and alkalis.

Recyclability

Yes

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit
-

1

IFC
-

1

Literature

MemTech Ground Gas Protection

MemTech Ground Gas Protection

Case studies

Structural Waterproofing & Ground Gas Protection

Structural Waterproofing & Ground Gas Protection

Structural Waterproofing and gas proofing using membranes (twin solutions)

Structural Waterproofing and gas proofing using membranes (twin solutions)