Verified by manufacturer 2 months ago
ISO 14001 Environmental Management Systems
ISO 45001 Health and Safety Management
ISO 9001 Quality Management
Punched hole mesh gratings B-CUBE® has a high strength-to-weight ratio which means that strength is maintained while weight is reduced. The greater the span, the lower is the weight – in relation to pressure-locked mesh gratings. The B-CUBE® grating can be produced in three design variants depending on how much slip resistance is needed. B-CUBE® mesh gratings are recommended in most constructions and industries where high air- or liquid flow are required.
Q10/312 Footway gratings
L30/45 Ramps/ walkways
Insert requirements or refer to a drawing.
2 mm thickness.
240 YP, hot-dip galvanized to EN 1461.
1.5 kN/ 200 x 200 mm (to EN ISO 14122).
6.5 mm diameter serrated upward grip holes, 34 x 34 mm downward drainage holes.
50–56% free area. 35 mm ball proof (to BS 4592). 43.5 x 43 .5 mm C-C grid.
Fixing Clip - Lower Part.
Fixing Clip - Upper Part MA44/Cube.
R13 = slope >35° (to DIN 51130).
Pendulum test value
36+ Low Slip Potential (to BS 7976).
Dry: 104 multi-directional; wet: 70 multi-directional.
Country of product manufacture
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.