OS Loop Control System

The coordinator controls power and data to the networked system fully monitoring primary (mains) and secondary (battery*) power supplies. The OSLoop system intelligently monitors current requirements of the system and determines how and when the MCPs can call on this power to activate AOVs. 

Each MCP contains actuator switching circuitry which also monitors the actuator cabling and circuitry for faults. If a fault is detected, then the MCP raises a local alarm and also informs the coordinator so the remote alarms can be triggered. The MCP also provides support for up to three smoke detectors. Again this circuitry monitors the detectors and cabling checking for faults. In addition, the MCP may be configured to work independently or grouped in the same system. 

Features 

• 40% less cable costs than a conventional system 
• 50% less devices compared to conventional systems 
• Reduced system installation time 
• EN12101 Pt.10 2005 + C1: 2007 compliant 
• EMC tested to EN61000-6-2 and EN61000-6-3 
• LVD tested to EN60335-1 as amended by EN60335-2-103 

* Batteries Sold separately