OpenSystem - External wall insulation system

Baumit UniPrimer.

Guidance for specification option:

Ready-to-use, multi-purpose primer to regulate absorption and improve adhesion for all Baumit render and paint finishes. Suitable for use as part of all Baumit EWI Systems. Compliant with ETAG 004 European System Standards for EWI systems with rendering. For external use.

Baumit PremiumPrimer

Guidance for specification option:

Ready-to-use, waterborne quartz-filled primer for all synthetic and mineral decorative finishes. Use to prepare a surface prior to applying render to regulate absorption and for better application. The new filler grain ensures excellent application and texture of the topcoat. Suitable for use as part of all Baumit EWI Systems. Compliant with ETAG 004 European System Standards for EWI systems with rendering.

openTherm insulation.

Guidance for specification option:

Grey, water vapour permeable, perforated EPS boards. Part of the ultimate highly breathable EWI system Baumit OpenSystem, with improved thermal insulation. Compliant with ETAG 004 European System Standards for EWI systems with rendering. Size: 500 x 1000 mm.

Mechanical Fixing (Masonry).

Guidance for specification option:

Baumit STR U is designed for mechanical fastening of polystyrene and mineral wool insulation boards. Suitable for concrete, solid brick, hollow and perforated brick, light concrete, porous concrete. Part of Baumit EWI systems.

Baumit StarTrack Red.

Guidance for specification option:

Baumit StarTrack Red allows a good adhesion without additional fixing for Baumit OpenSystem and other Baumit EWI systems. Additional mechanical fixing as an alternative to standard dowelling. For use with perforated and solid masonry and concrete. Existing old plaster up to a maximum total thickness of 40 mm can be bridged.

Expansion Joint 'E' Profile 2.5 m.

Guidance for specification option:

Expansion joint profile with alkali-resistant fibreglass reinforcement and render stop beads. For sealing and incorporating existing structural movement joints into an external wall insulation system. The E-form profile is for joints which are in the plane of the wall. Size: 125 x 125 mm.

Corner Bead with mesh 2.5 m.

Guidance for specification option:

PVC corner bead with mesh. For protection of 90 degree angles on façades.

6 mm Stop Bead with mesh 2.5 m.

Guidance for specification option:

PVC stop bead with alkali-resistant fibre glass reinforcement. Suitable as a render/plaster stop for final coats. Also suitable for round arches.

Window Profile Ideal 2.4 m.

Guidance for specification option:

Self adhesive rigid, white PVC window seal bead with compressed polyurethane sealing tape and reinforcement, for the sealing and decoupling of connection joints at window and door frames, for use in low energy and passive construction.

Window Profile Flexible 2.4 m.

Guidance for specification option:

Self adhesive rigid, white PVC window seal band with compressed polyurethane sealing tape and reinforcement, for the sealing and decoupling of connection joints at window and door frames. For use in low energy and passive constructions.

Plastic Base Profile 2 m.

Guidance for specification option:

BaseProfile made of plastic to minimize thermal bridges, with drip edge trim, bonded glass fibre mesh and connector pin system to prevent cracking occurring at the connection joints. Width of mesh: 125 mm.

StarTex Fine Mesh.

Guidance for specification option:

Fine, non-slip, alkali-resistant textile glass fabric for embedding in adhesive and leveling compounds, system-tested, tear strength ≥ 2.0 kN / 5 cm. Weight: approx. 160 g / m².

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Guidance for specification option:

Consult manufacturer and insert requirements.

Baumit PuraTop.

Guidance for specification option:

Weather resistant topcoat render for intense and brilliant colours. Ensure long-lasting colour stability through the excellent pigment binder. Featuring Baumit Cool Pigments technology for darker coloured facades. Available in the full range of Baumit Life colours.

Baumit StarContact White.

Guidance for specification option:

Natural, white, flexible, mineral-based, dry adhesive and basecoat render for Baumit EWI systems. Also suitable as a bonding mortar onto concrete. Suitable for use as part of Baumit StarSystem, StarSystem Mineral, StarSystem Nature and Plinth System.

Baumit StarContact.

Guidance for specification option:

Mineral-based, dry adhesive and basecoat render for Baumit external wall insulation systems.

Baumit StarTop.

Guidance for specification option:

Ready to use, topcoat render (thin coat finish render) for external use to create a stippled texture. Tested to EN 15824 standards and in a system to ETAG 004 standards.

Baumit SilikonTop.

Guidance for specification option:

Ready-to-use, silicone resin render with scratched or dragged grain texture. Highly durable and suitable for almost all requirements. Water vapour permeable, extremely water repellent, dirt-resistant and versatile. Available in the largest range of colours.

Baumit SilikonTop Fine.

Guidance for specification option:

Ready-to-use silicone resin render, for achieving a fine, smooth texture. Highly water resistant and water vapour permeable. For external use.

Brilliant white.

Guidance for specification option:

Brilliant white and colours which can be tinted in the Life colours in rows 2 to 9. Consult manufacturer for details and insert requirements.

Baumit SpeedTop.

Guidance for specification option:

Ready to use additive for SilikonTop and GranoporTop. Provides accelerated setting and enhanced durability on the façade in high humidity and low temperatures, as well as in fog. Can be added in temperatures of >+1°C and <15°C and with relative humidity of <95%.

Guidance for specification option:

Consult manufacturer and insert requirements or omit.