Ventilated facade system.
System suitable for ventilated facade in new and refurbishment projects with the following cladding materials:
The Ventilated Facade one layer system consists of a specially designed bracket (MFT-S2S U/UI) and aluminium profiles (MFT-S2S TT and MFT-S2S RHS) for vertical substructure.
The brackets are specially designed to be fastened to the concrete slab or the steel beam and to withstand the ventilated facade loads (wind and self-loading). The brackets include different hole geometries in the base plate (for installing anchors or screws). When needed, the flexible point brackets are used in order to fix the vertical profiles, holding up the wind loads and allowing the thermal expansion of the profile. The brackets can be supplied with (pre-installed) or without isolators.
The vertical profiles are connected to the support brackets with specially designed screws for ventilated façade, S-AD, which avoids creating compressing forces from the profile against the wall brackets and keeps the profile connected by the support bracket in place.
Additionally, each profile will be connected to each other with the connector, MFT-S2S PC. The connector will be fixed to one of the profiles in order to allow the second profile to expand. Each bracket in combination with the profile will allow an adjustment in order to align the profile with the wall distance needed along the ventilated facade. With this system and depending on the profile, different tolerances can be achieved in order to minimize the wall irregularities and install the cladding material as designed.
Features and benefits:
Applications:
System suitable for ventilated facade in new and refurbishment projects with the following cladding materials:
Uniclass 2015 | |
CAWS | G10/150 Steel framing system G10/20 Steel framing system H92/120 Rainscreen cladding |
Product Reference | MFT-S2S-1L-Adhesive-Rivets-Screws |
Brackets | - |
Type | MFT-S2S U M / LMFT-S2S UI M / L |
Length | From 80–300 mm or without isolators from 75–295 mm. |
Fastener | HIT-HYHRD-HHSA-RHST-RHUS-HRS-MD |
Profiles | - |
Type | MFT-S2S RHSMFT-S2S TT |
Fastener | S-AD |
Connector fastener | S-MD51LS |
Accessories | NoneAdapter plate MFT-S2S U AP LAdapter plate MFT-S2S UI AP LConnector MFT-S2S RHS PCConnector MFT-S2S TT PC |
MFT-FOX H-1L-Rivets-Screws
MFT-FOX H-2L-Adhesive-Rivets-Screws
MFT-FOX H-2L-Adhesive-Rivets-Screws-Wind Membrane
MFT-FOX H-2L-Hoesch
MFT-FOX HT-1L-Rivets-Screws
MFT-FOX HT-2L-Adhesive-Rivet-Screw
MFT-FOX HT-2L-Hoesch
MFT-FOX VT-1L-Adhesive-Rivets-Screws
MFT-FOX VT-1L-Bolt
MFT-FOX VT-1L-Clamps-Stainless Steel