MFT-FOX H-2L-Adhesive-Rivets-Screws-Wind Membrane

The ventilated facade two layer system consists of horizontal/ vertical aluminium profiles and aluminium brackets (MFT-FOX H/HI).

The aluminium bracket has a pre-assembled connecting screw and additional washer allowing fastening in accordance with Eurocode with vertical adjustment of the aluminium bracket, MFT-FOX H/HI.

The horizontal first layer profiles must be fastened to the brackets with pre-assembly connecting screws, A4. Fixed and flexible points are not required as the thermal expansion of the profile is taken up by the flexibility of the bracket.

The second layer vertical profiles are supplied with elongated holes to allow the vertical profile to be fastened to the horizontal profiles free of forces of constraint with specially design stainless screw, S-MD51 LS. Fixed points are created by placing two screws at the end of the elongated holes while flexible points consist of one screw.

Features and benefits:

• 40 mm adjustment capability of the profiles on the wall brackets.

• Powder coated bracket base plate for corrosion resistance.

• Bracket length: 55–300 mm (in 20 mm increments).

• Brackets can be installed using a range of methods—anchors, screws and direct fastening.

• Aluminium profiles according to EN 755-2; EN 573-3; EN 12020-2; EN 1090-3; EN AW 6063 T66 and EN1090.

• Suitable for all common base materials.

• Individual design using the PROFIS Facade PC application guarantees a technically sound, cost-efficient solution.

• The isolator separates the substructure from the base material reducing the thermal bridge (FOX HI).

• Easy to use with wind foil.

• No different bracket sizes.

Applications:

System suitable for ventilated façade in new and refurbishment projects with the following cladding materials:

• Fibre-cement.

• High pressure laminate (HPL).

• Metal.

• Plaster.

• Stone.

• Composite.

• Ceramic.