Verified by manufacturer 3 months ago
Airborne and flanking sound improvement system for ceilings and walls.
Isocheck Isowave 23 consists of a 10 mm Isowave acoustic foam measured to BS 4443 and BS EN ISO 845:2009 bonded to 12.5 mm high density, square edged fibre-reinforced (30 minute fire rated) gypsum board. It reduces unwanted flanking noise in order to comply with Approved Document E 2003 and subsequent amendments.
Features and benefits:
K11/27 Acoustic separating floor system
K11/275 Acoustic separating floor system
Isowave acoustic foam bonded to fibre-reinforced gypsum board.
1300 kg/m³ (board); <90 kg/m³ (foam).
Fire protection (single layer).
Isowave performs under the following classifications:
Sound insulation rating
Complies with Approved Document E of the Building Regulations when used as part of an Isomass design (design service available FOC).
Sound performance: aw 0.26.
1197 x 597 x 22.5 mm.
Contains Red List materials
Country of material origin
Country of product manufacture
Acoustic Barrier Mat - Flexible Mass Layer
Acoustic bonded floor covering - Acoustic bonded layer to go under an LVT
Acoustic bonded soft floor covering - Acoustic layer to be bonded over screed
Acoustic direct to joists floor system - Acoustic Board Treatment
Acoustic Impact Mat timber floors and stairs - Acoustic layer to go over any floor type
Acoustic Isolation strip for joists and stud walls - Acoustic isolation adhesive tape
Acoustic system for timber laminate - Acoustic layer for under a timber floor
Acoustic underscreed system - Acoustic layer to go under a screed
Acoustic underscreed system recycled - Acoustic layer to go under a screed
Antivibration wall strip - Masonry wall isolation strip