ImpactPRO® White PVC Hygienic Wall Cladding - Extruded Semi-Rigid PVC Sheet

• Suitable for all wet room and interior environments.
• Suitable for restaurants, commercial kitchens, wet rooms, showers, splash-backs, changing area’s, healthcare and hospitals.
• Suitable for thermoforming, hot welding and trimmed installations.
• Suitable substrates inlcude:
• 12.5 mm thick plasterboard.
• OSB Board 12 mm.
• Minimum 9 mm W.P.B resin bonded to substrate.

(PVA sealer not generally required).

All these surfaces will require PVA sealer coat by others unless specified otherwise:

• Good quality fair faced brick or block work. Well aligned joints bagged up flush.
• Straight to within 3 mm over a 2 m straight edge and bricks/ blocks flush with one's adjacent.
• Sand and cement rendering 1:3 to a steel trowel finish.
• Ceramic tiles which are securely bonded to substrate. (No responsibility is accepted for any subsequent delamination of tiles from the substrate).
• Certain sound painted surfaces (an adhesive test is advisable to ascertain compatibility).
• Pre-cast concrete walls (must have PVA sealer coat).
• Plastered surfaces (subject to survey by Installer to confirm suitability).

NB: Pink lightweight plasters are generally not suitable.

Painted surfaces will require a 'key' to avoid delaminating of paint from substrate.