Compare

GreenCoat® PLX Colour Coated Steel Fully Supported Traditional Standing Seam Roofing and Facade Cladding, With/Without Solar - Standing Seam Roof

Name: GreenCoat® PLX Colour Coated Steel Fully Supported Traditional Standing Seam Roofing and Facade Cladding, With/Without Solar - Standing Seam Roof
Brand: Metal Solutions Limited
SKU: rKscSp6UvNuHvyZD5MQdcf

Verified by manufacturer 2 months ago

Metal Solutions Limited

Third party certifications:

EPD
Certificate type
R EACTION TO FIRE - CLASSIFICATION REPORT EUI-22-000041
Certificate type
IATF 169492016
Certificate type
ISO 9001 Quality Management
Certificate type

GreenCoat PLX Pural standing seam can be used for roofs with a pitch of 3–7 degrees on buildings with humidity class of between 1–4 dwellings with high occupancy. Other uses - facade cladding.

Jump to:

+44 (0)1204 491800 Website

Application

The product can be used to cover complex surfaces such as barrel vaulted roofs and domes etc. It can be laid on a ventilated timber substrate, composite panel and direct onto insulation, using special warm roof fixing clips. Can also be employed to clad small surfaces such as dormers, fascias or gables.

As well as being used in a roofing application the system can also be used as traditional standing seam wall cladding, also known as angle seam cladding. This system offers tremendous opportunity to change cover widths to add interest to a facade project.

Installation:

A list of Approved Installers by postcode is available on request. Contact Email:

gaynor@metalsolutions.uk.com

Description

A colour-coated steel standing seam system with traditional detailing, giving an aesthetically pleasing finish whilst avoiding the industrial finishes found in contemporary standing seam systems.

Can be used in different widths in both roofing and facade cladding applications. Can also be employed to clad small surfaces such as dormers, fascias or gables.

It is available in two finishes, Pro is a smooth finish and Pural offers a subtle dappled effect.

Use the PRO finish only when using thin film solar photovoltaics.

Features and benefits:

Manufactured from a specialist sustainable colour coated steel made with rapeseed coating.
Material - A1 fire rated.
Seams are available in 25 mm or 38 mm formats.
The system can be provided as a complete roof kit including all flashing, matching rainwater products and ancillaries.
Solar specification also available for use with thin film solar photovoltaics. In this instance the PRO version must be used. Contact Metal Solutions for more information.

Protective Finishes:

Greencoat steel is protected with a zinc coating before being finished with the final BT finish.

The zinc coating (Z, 100 – 350 g/m2) is lead free and has a

minimum zinc content of 99 %. This protects the steel from

corrosion in two ways. It is a protective layer keeping oxygen and water away from the steel, but it also acts as a cathodic protection. This means that at cut edges or in case of damages through the zinc coating, the zinc will sacrifice itself and react to form protective compounds and block further corrosion processes.

Substructure:

Suitable substructure materials:

Ventilated 18 mm-thick weather and boil proof (WPB) plywood.
Ventilated oriented strand board OSB3.
Composite panel.
Rigid insulation.
Profiled metal deck.

Underlay:

ISO-Mat Pro® underlay is recommended for cold roof applications.

ISO-Mat Metal® underlay is recommended for warm roof applications.

Available from:

roofing-tool.com

Clips:

Fixed: 25 mm seams: SM-EFK-25; 38 mm seams: SM-EFK-38.
Sliding: 25 mm seams: SM-EFE-25; 38 mm seams: SM-EFE-38.
Flashing clips: SM-ELH-27.
For fixing to rigid insulation: Thermoseam warm room clip for metal roofing.

Available from:

roofing-tools.com

Installation:

Contact Metal Solutions for a list of Approved Installers by postcode

gaynor@metalsolutions.uk.com

General information

Finish	Coated Smooth Textured
Material	Steel
Shape	Rectangle
Length	13000 mm
Width	430 mm 530 mm 600 mm
Height	25 mm 38 mm
Warranty description	50 year

Uniclass	Pr_25_71_51_15 Carbon steel sheetsPrimary
CAWS	H31/10 Metal H31/120 Metal

Specification data - Carbon steel sheets

Standards	-
Flashings	Manufacturer’s standard. Guidance for specification option: A range of matching flashings are available. Contact manufacturer for details.
Material	Manufacturer’s standard. Guidance for specification option: Consult manufacturer for details.
Grade	Manufacturer’s standard. Guidance for specification option: Consult manufacturer for details.
Dimensions	-
Length	- Manufacturer guidance Insert project requirements, maximum length: 12 m. Alternative (bespoke) lengths are available, if they are logistically possible to transport. Consult manufacturer for details.
Finishes	-
Applied	Manufacturer’s standard.
Finish	Pro. Guidance for specification option: Smooth. Pural. Guidance for specification option: Textured.
Colour	Acorn Brown RR827 / SS0434. Anthracite Grey RR2H8 / SS0087. Brick Red RR7F2 / SS0742. Cottage Red RR29 / SS0758. Leaf Green RR594 / SS0874. Metallic Copper RR979 / SS0778. Metallic Dark Silver RR41 / SS0044. Metallic Gold RR042. Metallic Silver RR40 / SS0045. Metallic Sterling RR974 / SS6045. Mountain Grey RR23 / SS0036. Nordic Night Black RR33 / SS0015. Quarry Grey RR287 / SS0244. Silver Fir Green RR5J3 / SS0975. Snow White RR19 / SS0001. Special order. Guidance for specification option: Other colours are available subject to minimum order quantities; consult manufacturer for details.
Reaction to fire	-
External face	Manufacturer’s standard. Guidance for specification option: Material is A1 fire-rated, consult manufacturer for details.

Seam	25 x 430 mm/ 530 mm. Guidance for specification option: Minimum pitch: 5°. 38 x 404 mm/ 504 mm. Guidance for specification option: Minimum pitch: 3°. Manufacturer guidance Other centres on request; consult manufacturer for details.
Coefficient of thermal expansion	0.012 mm/m·K. Guidance for specification option: GreenCoat PLX offers an approximately 50% lower expansion coefficient in contrast to all other metals. This property allows for longer profiles/sections (consult technical literature for details) and prevents buckling and deformation for many decades.
Accessories	Not required. Solar photovoltaic panel. Guidance for specification option: Available with Pro finish only.

Sustainability data

Contains Red List materials	No
Country of material origin	Sweden
Country of product manufacture	United Kingdom
Material	Steel
Manufacturing plant location	Soho St, London W1D, UK
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	2.63 kg CO₂ eq/kg
Recyclability	95%
Recycled content As defined in clause 7.8 of BS EN ISO 14021	20 %