GreenCoat® PLX Colour Coated Steel Traditional Fully Supported Batten Roll Roof And Facade Cladding, With/Without Solar - Traditional Batten Roll Cladding

Steel batten roll for use as a roofing or cladding application. It is available in two finishes, Pro is a smooth finish and Pural offers a subtle dappled effect.

Pro (smooth finish) is the product to use when attaching thin film solar photovoltaics.

Features and benefits:

• Manufactured from lightweight (350 g/m² zinc coated) corrosion resistant steel.
• Material - A1 fire rated.
• Ultraviolet (UV) light and scratch resistant.
• GreenCoat® colour coated steel products from SSAB Swedish Steel use Swedish rapeseed oil in the coating, producing a sustainable colour coated steel for exterior buildings. The patented BT coatings (Bio-based Technology) offer environmental advantages (100% recyclable) and increased performance.
• Can be utilized as a heritage roof covering system.
• Solar specification also available for use with thin film solar photovoltaics. In this instance the PRO version must be used. Contact Metal Solutions for more information.
• Suitable as a dormer roof and facade cladding finish.

Protective Finishes:

Greencoat steel is protected with a zinc coating before being finished with the final BT finish.

The zinc coating (Z, 100 – 350 g/m2) is lead free and has a

minimum zinc content of 99 %. This protects the steel from

corrosion in two ways. It is a protective layer keeping oxygen and water away from the steel, but it also acts as a cathodic protection. This means that at cut edges or in case of damages through the zinc coating, the zinc will sacrifice itself and react to form protective compounds and block further corrosion processes.

Substructure:

Suitable substructure materials:

• Ventilated 18 mm-thick weather and boil proof (WBP) plywood.
• Ventilated oriented strand board OSB3.
• Composite panel.
• Rigid insulation.
• Profiled metal deck.

Underlay:

ISO-Mat Pro® underlay is recommended for cold roof applications.

ISO-Mat Metal® underlay is recommended for warm roof applications.

Available from:

roofing-tools.com

Clips:

TS 5 x 20 x 50 stainless steel fixing strip.

Available from:

roofing-tools.com

Installation:

Contact Metal Solutions for a list of Approved Installers available by postcode.

Email

gaynor@metalsolutions.uk.com