NBS Source
I'm a manufacturer

GenieClip RST - Resilient Sound Isolation Clip

Verified by manufacturer 3 months ago

Pliteq Third party certifications:
  • ISO 9001 Quality Management

    Certificate type

Resilient sound isolation clip for use when superior sound control is required.

Jump to:
+44 203 9846444 Website

Application

Resilient sound isolation clip installed with acoustical sealant and drywall furring channels (GenieClip THFC) for support of plasterboard for noise control (de-coupling) in walls and ceilings. Suitable for steel frame, timber frame, CLT and concrete structures.

Description

Unibody moulded rubber and steel part used when superior sound control is required in multifamily housing, high-rise residential, or commercial buildings.


Features and benefits:

  • Significantly improves low and high frequency sound control performance.
  • Substantially reduces impact noise in floor-ceiling assemblies.
  • Allows for thinner and even no resilient mat used in certain floor-ceiling assemblies.
  • Suitable for new-builds and retrofit.
  • Qualifies for LEED® points.
  • High fire resistance due to integrated washer 
  • Substantially reduces costs and associated problems in timber frame.
  • No short-circuiting as is often the case with resilient channel.
  • Allows to slim down twin stud party walls to single stud party walls.

General information

Color

Silver

Black

Material

Rubber

Steel

Shape

Other

Length

25 mm

Width

46 mm

Guidance for specification option:

Including GenieClip THFC (Furring Channel)

Height

64 mm

Warranty description

Lifetime

Guidance for specification option:

Pliteq Inc. is a corporation duly organized and validly existing under the laws of the province of Ontario. Pliteq offers a limited lifetime warranty on the GenieClip® brands of Impact Sound Insulation products against defects in material and workmanship and GenieClip® shall meet all published specifications and shall perform effectively.

Pliteq warranties that during the warranty period GenieClip® shall not harden, become brittle, chip, crack, tear, or exhibit any signs of excessive deterioration except for normal wear and tear. All other warranties, including implied warranties for a particular purpose, are expressly excluded. The sole remedy against the seller will be the replacement or repair of the defective goods, or at seller's option, credit may be issued not exceeding the selling price of the defective good.

Manufacturer guidance

The recommendations for applications and installation are based on our extensive experience and on current technological practice. Our liability and responsibility in the event of damages is limited to the extent defined in our General Terms and Conditions of Business and is not in any

way increased by the above recommendations or by advice given by our sales representatives or applications engineering staff.

Uniclass

Pr_80_77_94_42 Isolation hangersPrimary
Pr_20_29_14_87 Suspended ceiling clips

CAWS

K10/485 Suspended ceiling grids

K10/215 Suspended ceiling system

K10/125 Metal stud partition system

K10/401 Gypsum plasterboard

K10/415 Gypsum plasterboard

K10/115 Metal stud partition system

K40/105 Suspended ceiling system

K10/30 Metal stud

K40/20 Board-suspended ceiling systems

K40/135 Board-suspended ceiling system

Specification data - Isolation hangers

Load

48 kg/m².

Guidance for specification option:

Typical recommendation three clips per m², resulting in 48 kg/m² design load (16 kg per each GenieClip RST).

Dimensions

41 x 64 x 25 mm.

Manufacturer guidance

W x H x D.

Projection

46 mm.

Guidance for specification option:

Incl. GenieClip THFC.

Clip

0.045 kg.

Manufacturer guidance

Weight.

TensileStrength

11.2 MPa.

Guidance for specification option:

Minimum.

Manufacturer guidance

ASTM D412, Die C.

Elongation at break

454%.

Guidance for specification option:

Minimum.

Manufacturer guidance

ASTM D573.

Hardness

37 durometer.

Manufacturer guidance

ASTM D2240.

Dynamic stiffness

11.3 N/mm.

Guidance for specification option:

Dynamic-Static Stiffness Ratio (ASTM D5992, D4473, D4065): 1.19.

Manufacturer guidance

ASTM D5992, D4473, D4065.

Low temperature stability

-40°C.

Upper temperature stability

+115°C.

Sustainability data

Contains Red List materials

No

Country of product manufacture

Canada

Material

Rubber

Steel

Recyclability

Reusable

Expected Life

Lifetime

Third party certifications

ISO 9001 Quality Management

ISO 9001 Quality Management

ISO 9001-2015: Quality Management System

Literature

GenieClip Brochure

GenieClip Brochure

GenieClip Installation Guide

GenieClip Installation Guide

Hoteliers Acoustic Design Guide

Hoteliers Acoustic Design Guide

Mixed-Use Buildings Acoustic Design Guide

Mixed-Use Buildings Acoustic Design Guide

Resilient Channels: Guaranteed to Fail

Resilient Channels: Guaranteed to Fail

Indicative Details - GenieMat RST

Indicative Details - GenieMat RST

Case studies

Duhamel Place

Duhamel Place

Similar products from Pliteq

GenieClip LB - Resilient Sound Isolation Bracket

GenieClip LB - Resilient Sound Isolation Bracket

GenieClip LB2 - Resilient Sound Isolation Bracket

GenieClip LB2 - Resilient Sound Isolation Bracket

GenieClip LB3 - Resilient Sound Isolation Bracket

GenieClip LB3 - Resilient Sound Isolation Bracket

GenieClip Mount - Resilient Sound Isolation Clip

GenieClip Mount - Resilient Sound Isolation Clip