Verified by manufacturer 5 months ago
A range of pourable concrete repair mortars for filling holes in concrete or asphalt floors inside or out.
Mix the water at the following ratio: 1kg of powder to 100ml of water.
Due to the short working life of the mixed product, we recommend you carry out the mixing near to the repair and not near to the water source. Put the water into the empty bucket and gradually add the powder stirring constantly to achieve a pourable slurry.
When a smooth consistency is achieved, simply pour it in to the hole.
Approximately 5 to 10 minutes at 20°C, so do not mix at one time more than you can use within a few minutes.
An easy to mix pourable material for quick repairs to level concrete, inside or outside. Very strong and hardening quickly, it will accept heavy traffic including forklifts just two hours after application.
Flowpatch® sub zero:
A pre-mixed magnesium phosphate cement blended with specially selected aggregates, that will cure rapidly, even at -20°C and accept traffic after just two hours. Ideal for repairing holes or levelling damaged concrete floors in freezer and chiller rooms. Also suitable for general external repairs in cold conditions.
Flowpatch® Deep Fill:
An easy to mix pourable material for quick repairs to deep holes in level concrete, inside or outside. Very strong and hardens quickly, it will accept heavy traffic including forklifts only two hours after application.
Flowpatch Asphalt Repair:
For decades we’ve been recommending our bestselling Flowpatch® pourable repair mortar for fast, pourable and strong repairs to concrete. Now, we’ve reformulated this winning formula so you can use it to repair asphalt and tarmac surfaces too.
Traditionally, repairs would involve cutting out around the damaged asphalt and refilling with a similar material. With Watco Flowpatch Asphalt Repair, just pour the mixture straight over the top of the surface erosion and used to fill holes up to 100mm deep in just one layer.
Recommended areas of use
Features and benefits:
C42/310 Repair mortar
At 25 mm thick.