NBS Source
List your products
Application

Suitable for the everyday support of a variety of outdoor equipment, including:

  • Pipework, including small flow-and-return installations.
  • Lightweight cable trays.
  • Electrical containment.
  • Single fan air-conditioning units.
  • Air source heat pumps.
  • Solar thermal and solar photovoltaic on flat roof installations.

Description

Universal support system for pipework installations and cable trays, providing elevated, low level support. Manufactured from milled, sieved and graded recycled rubber, bound with high-quality adhesive and then compression-moulded.

Features and benefits:

  • Non-penetrative support.
  • Flexible, and can accommodate late design changes.
  • Fast and simple installation.
  • Three threaded inserts provide an anchor point for the securing of additional M10 threaded studs (positioned vertically).
  • Enables the support of various equipment types.
  • Allows for the installation of 41 x 41 mm or 41 x 21 mm struts, which can be installed to various lengths from 500–3000 mm (dependent on application).
  • Drainage slots are moulded to the underside of the foot for rainwater run-off.
  • Suitable for internal and external environments between –40°C and 80°C.
  • Low cost solution.
  • Robust, heavy-duty and high-quality materials used.
  • Inserts are compatible with industry-standard fixings and fixtures.

Applications:

Suitable for the everyday support of a variety of outdoor equipment, including:

  • Pipework, including small flow-and-return installations.
  • Lightweight cable trays.
  • Electrical containment.
  • Single fan air-conditioning units.
  • Air source heat pumps.
  • Solar thermal and solar photovoltaic on flat roof installations.

General information
Finish

Hot-dip galvanized to BS EN ISO 1461

Material

Foot: Styrene-butadiene rubber (SBR) to BS 7188 and BS EN 1176-7

Inserts: Three M10 threaded inserts, moulded within rubber foot

Uniclass 2015 Roof equipment supports (Pr_80_77_27_73)
Specification data
Product Reference

Flexi Everyday - Flexi Foot Universal, FF-250-UNI

Accessories/ Other requirements

Not required

Protection fleece, MPF-12

2000 x 1000 mm. 300 g/sm.

Standard product features

Overall size (l x w x h):

250 x 185 x 100 mm.

Material:

  • Foot: Styrene-butadiene rubber (SBR) to BS 7188 and BS EN 1176-7.
  • Inserts: Three M10 threaded inserts, moulded within rubber foot.

Finish:

Hot-dip galvanized to BS EN ISO 1461.

Weight:

2.8 kg.

Technical characteristics:

  • Density: 1 kg/cm³.
  • Maximum torque (inserts): 15 Nm.
  • Maximum load: inserts: 25 kg; overall: 125 kg. Tested with a 4:1 safety ratio.

Product Options

Accessories/ Other requirements:

- Protection fleece:

Geotextile polyester fleece for polyvinyl chloride (PVC)/ thermoplastic olefin (TPO) field membrane protection. Sold by the linear metre. Consult manufacturer and insert requirements.

Literature
Similar products from Flexi Support Systems from Pump House