You are viewing content for United Kingdom.
Choose a country to see content for your location. Changing region will navigate you to the homepage.
Flameshield EW120 S Vertical Active Fire and Smoke Curtain Barrier - BS 8524-1 & BS 8524-2 Tested - Vertical Active Fire and Smoke Curtain
Verified by manufacturer today
Vertical active fire and smoke curtain barrier providing 120 minutes integrity and 120 minutes radiation control, achieving 10.7 kW/m² at 120 minutes, tested to BS 8524-1 and installed to BS 8524-2.
Application
Vertical active fire and smoke curtain barrier suitable for a wide range of internal fire compartmentation and smoke control applications, including protected means of escape, atria, lobbies, receptions, corridor separation, openings in fire-resisting walls, boundary protection, escalators, stairwells, lift shafts and lift lobbies.
Commonly specified within hospitals, healthcare facilities, schools, universities, hotels, high-rise buildings, mixed-use developments, commercial offices, retail environments, stadia, museums and galleries, as well as transport infrastructure, industrial and utility installations. Also suitable for use within defence, custodial, policing and secure environments where reliable fire and smoke containment is critical.
The system supports flexible architectural layouts while maintaining building fire strategy objectives, tenability requirements and regulatory compliance.
Description
The Flameshield EW120 S Vertical Active Fire and Smoke Curtain Barrier is an electrically operated, gravity fail-safe fire and smoke control system designed to form a virtually continuous fire-separating barrier within a building. The system delivers 120 minutes fire integrity and 120 minutes radiation performance, maintaining radiation levels below 15 kW/m² and achieving 10.7 kW/m² at 120 minutes, supporting occupant tenability and protected means of escape.
The barrier assembly comprises a carbon steel barrel and integrated 24 V d.c. motor, incorporating a high-performance flexible fire curtain fabric capable of withstanding temperatures in excess of 1000°C. The barrel deflection complies with BS 6323-5, ensuring structural stability across large openings, with standard curtain sizes available up to 8000 mm x 8000 mm. A two-section bottom rail provides consistent tension and controlled descent, ensuring reliable gravity fail-safe operation in the event of power or system failure.
Designed for seamless integration into architectural environments, the Flameshield curtain can be concealed above ceiling lines and is available with colour-finished end plates, guides and hoods, enabling coordination with interior design requirements without compromising fire performance.
The system incorporates a two-stage closing operation, delayed descent options and fully tested ancillary equipment including egress switches, access switches, obstruction detection, and heat and smoke activation devices, all tested to Annex H of BS 8524-1. Optional audible and visual warning systems, including voice warning devices, enhance safety during deployment.
Fire, radiation and smoke containment performance has been independently tested and approved by Warrington Fire Research Centre and Exova, in accordance with BS 8524-1, BS EN 1634-1 (fire and radiation) and BS EN 1634-3 (smoke containment).
Features and benefits:
- Gravity fail safe closes without mains power.
- Provides smoke control.
- Lightweight slimline compact design.
- Two stage closing operation.
- Compliance tested to maintain building fire safety and integrity in accordance with BS 8524-1 and installed in accordance with BS 8524-2.
- Can be hidden neatly above the ceiling line to assist the building design and aesthetics.
- Voice warning devices available.
- Fully resets after fire test without the need for engineers to attend.
- Low maintenance costs.
- Timed delay closing.
Radiation:
- 120 Minutes < 15 kW/m².
- 15 Minutes - 2.617 kW/m².
- 30 Minutes - 3.748 kW/m².
- 60 Minutes - 6.306 kW/m².
- 90 Minutes - 8.328 kW/m².
- 120 Minutes -10.708 kW/m².
General information
Color | Beige Black Bronze Brown Copper |
Finish | Powder-coated Mill |
Material | Carbon steel Stainless steel Guidance for specification option: Stainless steel wire and reinforced glass fabric. |
Shape | Rectangle |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | One year Guidance for specification option: Extended warranty available on application. |
Uniclass | |
CAWS | L20/610 Roller shutters/ curtains |
SKU Code | FS EW120 S |
Specification data - Vertical active fire curtain barriers
Classification data | |
Standards | |
Barrier assemblies | To BS 8524-1. |
Test standards | Vertical, horizontal and angled to BS EN 1634-1. |
Third-party certification | Warrington Fire Report 406515. |
Size | Guidance for specification option: Maximum size (width x height): 8000 x 8000 mm. (32 m²). Insert requirements. |
Performance | |
Smoke containment | With smoke seals. |
Fire resistance | 120 minutes. |
Barrier units | Single. |
Deployment | Full. Guidance for specification option: As standard. Multipositional. Guidance for specification option: Optional: Partial drop. The barrier shall have the facility to deploy to a pre-determined position to allow escape and initial smoke containment. The partial close position shall be site adjustable with an adjustable wait time in the partial close position of up to 10 minutes. |
Accessories | Emergency retract. Guidance for specification option: The barrier can have an emergency retract interface for escape and emergency access. The interface shall be volt free, normally open (close on operation). The signal required shall be momentary with a site adjustable retract time. The emergency retract facility shall be operational as long as there is a primary/secondary source or via an external source. Audio/ visual/ spoken warning unit. Guidance for specification option: The barrier has a volt free c/o contact which indicates an active c/o (change over) contact indicating an active alarm signal. An Audio/Visual warning can be interfaced with this using power supplied by secondary source or via an external source. BMS interface. Guidance for specification option: The barrier has volt free c/o contacts to indicate whether the barrier is fully open or fully closed. Obstruction warning devices. Guidance for specification option: Where sensory equipment for detecting obstructions to barrier assembly deployment is provided, e.g. a single or multi-beam detection system, when the barrier assembly is tested in accordance with Annex H, it shall provide a warning in accordance with 5.8.5.2.
|
Fabric | 4415-2-B1 fabric. Guidance for specification option:
|
Barrel | Carbon steel tube. Guidance for specification option: Fire curtain barrels are manufactured from carbon steel tube, tube size dependent on the overall size of the unit and deflection calculated to conform to British Standards. |
Finishes | Powder-coated. Mill. Manufacturer guidanceC3 corrosion class available as standard. Advanced durability to corrosion class C3h on application. |
Colour | Guidance for specification option: Consult manufacturer and insert requirements. Full selection of RAL colours available. |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Manufacturing plant location | |
Material | Carbon steel Stainless steel Guidance for specification option: Stainless steel wire and reinforced glass fabric. |
Expected Life | Ten year Guidance for specification option: Lifetime under BS 8524-2. Manufacturer guidanceLifetime under BS 8524-2. |
BIM objects
This BIM object has been authored to meet the requirements of the
Find out more about the
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 1 |
 IFC | - | 1 |
Literature
Literature type
A1S Group Specification Sheet: Flameshield EW120 S
A1S Group Drawing (Face Fit) Flameshield EW120 S
A1S Group Drawing (Reveal Fit) Flameshield EW120 S
CPD materials
The Functionality, Design and Compliance of Fire and Smoke Curtains
Case studies
Fire Curtains to EW120 for 125 Deansgate Manchester UK
Flameshield Fire Curtain with EW120 enhanced radiation control
Similar products from A1S Group
Flameshield 8524 (S) Vertical Active Fire and Smoke Curtain Barrier – BS 8524-1 & BS 8524-2 Tested - Fire and Smoke Curtain
Flameshield 8524 Max/S Vertical Active Fire and Smoke Curtain Barrier – BS 8524-1 & BS 8524-2 Tested
Flameshield 8524 Overlapping Vertical Active Fire Curtain Barrier – BS 8524-1 & BS 8524-2 Tested - Fire Curtain
Flameshield 8524 Vertical Active Fire Curtain Barrier – BS 8524-1 & BS 8524-2 Tested
Flameshield EVO Vertical Active Fire and Smoke Curtain Barrier – BS EN 1634-1 Tested - Fire and Smoke Curtain
Flameshield EW120 Max/S Vertical Active Fire and Smoke Curtain Barrier – BS 8524-1 & BS 8524-2 Tested
Flameshield EW120 Vertical Active Fire and Smoke Curtain Barrier – BS 8524-1 & BS 8524-2 Tested - Fire Curtain