NBS Source
EP801PF Hook-Up Elite Prime - Remote Mounted
Compare variants

EP801PF Hook-Up Elite Prime - Remote Mounted

DN15/15: Fig. EP801P

Hattersley Variant:

DZR brass pressure independent control valve with strainer drain and flow measuring device, PN16.

Jump to:
+44 (0)1473 277300 www.hattersley.com

Application

Suitable as valve assembly for fan-coil or terminal unit.

Description

DZR brass pressure independent control valve with strainer drain, PN16.


Features and benefits:

  • Compact, pre-fabricated unit – now available with Elite Prime PICV with a wide range of settable flows to suit all applications.
  • All valves are subject to both a pressure test, in accordance with BS EN 12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1.
  • The test provides reassurance of performance and accuracy within each valve.
  • Provides accurate flow rates and differential pressure control, as well as flow measurement (EP801PF) with system flushing and isolation.
  • DZR H Body tested to 3.1 x Design Working Pressure (DWP) during development for design robustness and tested to EN12516-2 to comply with the Pressure Equipment Directive (PED).
  • Fully assembled and factory tested unit reduces installation time, costs and specification risks.
  • Available with or without extension stems to suit customer specification.
  • On-Off, modulating or feedback actuators are available separately to match specification.
  • Available in 400 kPa and 800 kPa rated variants.
  • Valve assembly will be labelled to include the terminal unit reference number and flow rate.
  • Preassembled to the requirements of each individual terminal unit, to include a flushing by-pass with integral isolation valves.

General information

Color

Yellow

Body assembly.

Green

Lever.

Blue

Downstream flow set point indicator.

Red

Upstream flow set point indicator.

Grey

Regulator cap and stem.

Material

Brass

Body assembly.

Rubber

Sealing gasket and O-rings.

Plastic

Set point indicators and cap.

Uniclass

Pr_65_54_40_16 Irrigation control valvesPrimary

CAWS

S90/650 Flow reducing/ servicing valves

S90/650 Flow-reducing/ servicing valves

S92/435 Control valve sets

S92/435 Control valve sets

Specification data - Irrigation control valves Enhanced data

Regulating function

Flow rate.

Operation

Non-autonomous.

Connections

Flushing bypass body: BSP Taper, Strainers and tailpieces: BSP Parallel.

Inlets/outlets diameter

Nominal.

DN15/15.

Dimensions

Nominal A x B x C x D.

160 x 148 x 76 x 67 mm.

Weight

2.15 kg.

PressureRange

Temperature: -10 to +100°C: 16 bar.

Integral accessories

Flushing bypass with isolation valves, PICV with low to high flow options, flow measuring device, extended handles for chilled water applications, strainer, drain and pressure test points.

Material (all components)

Bypass H-body, tailpiece, Fig. 1934 PICV, Fig. 1000 FMD, D299P strainer: DZR brass BS EN 12165 (CW602N).

Optional accessories

Available separately to match specification.

Not required.

On-Off actuator.

Modulating actuator.

Feedback actuator.

Similar products from Hattersley

BSRIA Hook-Up Elite Prime - Direct Mounted

BSRIA Hook-Up Elite Prime - Direct Mounted

BSRIA w/ 4-port Hook-Up Elite Prime - Direct Mounted

BSRIA w/ 4-port Hook-Up Elite Prime - Direct Mounted

Classic Hook-Up Elite Prime - Direct Mounted

Classic Hook-Up Elite Prime - Direct Mounted

EP601PF Hook-Up Elite Prime - Remote Mounted

EP601PF Hook-Up Elite Prime - Remote Mounted

EP701PF Hook-Up Elite Prime - Remote Mounted

EP701PF Hook-Up Elite Prime - Remote Mounted

H266/C266 Hook-Up - Commissioning Set

H266/C266 Hook-Up - Commissioning Set