NBS Source
I'm a manufacturer

CARRICO® Car Lift

Verified by manufacturer 3 months ago

Lödige Industries

Cost-efficient vehicle transport between floors.

Jump to:
01784 221140 Website

Application

Car lift; applications include single-family detached homes, multi-family buildings, office buildings and hotels. Suited to less frequent traffic; particularly suitable for up to 26 parking places.

Description

Cost-efficient vehicle transport between floors.


Features and benefits:

  • Saves installation space, as no ramp is required.
  • Especially suitable for narrow shafts.
  • Cost-effective way to transport cars.
  • For less frequent traffic.
  • Particularly suitable for up to 26 parking places.
  • Fully automatic travel for lifts with two stops for maximum comfort; automatic travel from three to eight stops.
  • Car with passenger escort allowed.
  • Low noise.
  • Smartphone app control option.
  • Lifting height up to 25 m.


Technical data:

  • Lifting height up to 25 m.
  • Nominal speed: 0.15 m/s
  • Pit depth: 850 mm (standard) - reduction possible
  • Nominal load: 3,500 - 4,200 kg
  • Cabin width: 2,500 - 3,000 mm
  • Cabin depth: 5,500 - 7,000 mm
  • Cabin height: 2,100 - 3,000 mm
  • Shaft width: cabin width + 800 mm
  • Shaft depth: cabin dpeth + 800 mm
  • Stops: 2 - 8
  • Accesses: 2- 16
  • Directives: Machine Directive 2006/42/EC and DIN EN 81-41 (on the basis)

General information

Color

Other

Contact manufacturer for any colour.

Finish

Galvanized

Material

Steel

Shape

Rectangle

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

One year

Uniclass

Pr_65_80_47_95 Vertical lifting platformsPrimary

CAWS

X12/110 Vertical lifting platform systems

X12/110 Vertical lifting platform systems

Specification data - Vertical lifting platforms

Standard

Machine Directive 2006/42/EC and DIN EN 81-41 (on the basis)

To Machinery Directive 2006/42/EC.

Rated load (minimum)

Axle load: Maximum 1750 kg, forklift operation prohibited.

3500 kg.

Maximum 4200 kg.

Drive type

Hydraulic power unit with pump-motor suboil unit.

See Motor Position below for machine room/ cabinet options.

Carriage type

Fully enclosed.

Carrier

-

Frame material

Manufacturer's standard.

Frame finish

Manufacturer's standard.

Frame colour

Manufacturer's standard.

Infill material

Sheet steel.

Infill finish

Sendzimir-galvanized steel.

Painted.

Stainless steel.

Insert colour

Silver.

Standard for Sendzimir-galvanized and stainless steel finishes.

Colour.

Painted finish only; insert requirements.

Doors

-

Arrangement

Front opening (single entrance).

Through-loading/ front-and-rear opening (two entrances).

Type

Door height is 2100 mm as standard; for options, consult manufacturer.

Six-part, centrally opening telescopic sliding doors.

Standard.

Automatic louvre doors, centrally opening.

Two cabin/ two landing doors.

Slat-surface aluminum, powder-coated RAL 9006.

Clear opening width (minimum)

Insert requirements, maximum door width: 2400–3000 mm.


Maximum cabin width varies dependent on maximum door width and lifting height required; consult manufacturer's literature for details.

-

Fire classification

Manufacturer's standard.

EW30.

Only available with standard telescopic doors.

EW60.

Only available with standard telescopic doors.

Frame material

Low-carbon steel.

Frame finish

Painted.

Infill finish

Manufacturer's standard.

Painted.

Powder-coated.

Infill colour

Manufacturer's standard.

Manufacturer's standard finish only.

RAL.

Insert requirements from the Classic RAL colour table.

Available for painted or powder-coated finishes only.

Carrier floor

-

Dimensions

-

Width (minimum)

Consult manufacturer's literature and insert requirements.


2500–3000 mm ;maximum cabin width allowable varies dependent on maximum door width and lifting height required.

-

Depth (minimum)

5500–7000 mm.; consult manufacturer's literature and insert requirements.

Cabin depth is defined as the distance between the entrance panels.


Useable depth depends on door arrangement:

  • Through-loading/ front-to-back: Cabin depth minus 100 mm.
  • Front-opening: Cabin depth minus 130 mm.

-

Material

On request, a platform division can be made in longitudinal direction. This is particularly recommended in difficult construction site situations, with regard to space conditions, in order to ensure the insertion of the platform into the lift shaft.

Not available/required for extruded aluminum profiles.

Extruded aluminium profiles.

 Particularly suitable for difficult construction site situations with regard to space conditions, as this variant is only installed in the lift shaft on site.

Smooth sheet metal, primed.

RAL 7032.

Smooth sheet metal, primed, platform division.

RAL 7032.

Aluminium bulb plate.

Aluminium bulb plate, platform division.

V2A stainless steel chequer plate.

V2A stainless steel chequer plate, platform division.

Two-component anti-slip coating.

Epoxy resin-based, solvent-free and non-slip coating, is sprinkled with quartz sand with a grain size of  0.3–0.8 mm.

Two-component anti-slip coating, platform division.

Colour

As Material.

Electrical supply

Manufacturer's standard.

Control device type

Operation via smartphone app is available; consult manufacturer for details.

Manufacturer's standard.

  1. Handheld transmitter (radio remote control);
  2. Pull switch:
  • With console for ceiling mounting.
  • 2 m-long pull cord. Consult manufacturer for full details.

Accessories

Additional features not listed, e.g. oil coolers or tank heaters, are dependent on performance requirements and can be discussed with the manufacturer.

None.

Deflector rails, hardwood.

Insert requirements.

Can be arranged on the car side walls in a single row or two-row arrangement. This prevents damage to the lift cabin and vehicle. 

Deflector rails, plastic.

Insert requirements.

Can be arranged on the car side walls in a single row or two-row arrangement. This prevents damage to the lift cabin and vehicle. 

Threshold heating tape.

Self-limiting heating tape for landing door thresholds located outdoors for safe operation of the lift system in frosty conditions.

Silence package I.

For the reduction of structure-borne noise on the hydraulic drive system. Consult manufacturer for details.

Silence package II.

For the reduction of structure-borne noise on the hydraulic drive system. Consult manufacturer for details.

Silence package III.

Whisper rollers for telescopic sliding door. Consult manufacturer for details.

Key safe.

Complete key safe with three keys, security card: Series 600 

834 EFEFBF and wall anchor.

Outer dimensions: 145 x 46 mm; internal dimensions: 78 x 36 mm.

To be installed on site independent of the lift.

Entry configuration

Insert requirements, 2–8 stops.

Include details of accesses per floor for through-loading/ front-and-rear opening.

One side or through car loading

Cabin

Components:

  1. Signal lights (IP65)
  2. Operating panel including positioning indicator.
  3. Call button panel.
  4. LED ceiling light panel.
  5. Lift doors (detailed elsewhere).
  6. Light barriers for car detection.
  7. Light grid in entry area.
  8. Radar entrance monitoring system.
  9. Cabin floor (detailed elsewhere).
  10. Cabin ceiling/cabin walls.


For full details, consult manufacturer.

For deflector strips, see Accessories.

Height: 2100–3000 mm; insert requirements.

Lift height

Up to 25 000 mm; insert requirements. For cabin heights of 2100 mm and superimposed accesses, the minimum floor distance is 2670 mm.


Note that allowable cabin, shaft and door widths vary with overall lifting height. Consult manufacturer's literature for details.


Lifting height is the distance between the finished floor level (FFL) of the highest and lowest levels. Pit depth and headroom at the highest level are additional height factors.

up to 25,000 mm

Headroom

Note that the headroom depends on a number of factors, including the planned pit, and can increase in size if a silence package is used (see accessories).

Manufacturer's standard.

Consult manufacturer's literature for details.

Bespoke.

Consult manufacturer's literature for options and insert requirements.

Shaft

Manufacturer's standard.

Width/ depth = cabin width/ depth + 800 mm.

Head height minimum 2700 mm (dependent on headroom requirements.

Bespoke.

Insert requirements.

  • Note that minimum shaft width varies with overall lifting height.
  • Minimum shaft depth is dependent on required cabin depth.

Consult manufacturer's literature for details.

MotorPosition

For all options, insert location requirements.

  • All configurations other than option 5 require the machinery to be located alongside the lift shaft, along the length. Consult manufacturer for full details.


Minimum height: 2100 mm.

Machine room (option 1).

Minimum width: 2000 mm.

Minimum depth: 2000 mm.

Machine room (option 2).

Minimum width: 1400 mm.

Minimum depth: 3000 mm.

Machine room (option 3).

Minimum width: 450 mm.

Minimum depth: 2560 mm.

Machine control cabinet (option 4).

Minimum width: 700 mm.

Minimum depth: 1400 mm.


A space-saving version of the machine room. The drive unit and control unit are housed in the cabinet, removing the need for a separate machine room (saves approx. 4 –5 m²).

Machine control cabinet (option 5).

Minimum width: 700 mm.

Minimum depth: 1400 mm.


A space-saving version of the machine room, recessed into the shaft wall to avoid a protruding contour outside the shaft.

Pit opening

Depth: 850 mm.

As standard. Depth reduction possible; consult manufacturer.

Speed

0.15 m/s.

Insulation

The following areas can be insulated:

  • Shaft side walls;
  • Front-facing shaft walls (except for in the area of the door);
  • Shaft ceiling (headroom must always be extended by the thickness of the insulation.


Consult manufacturer for full details including allowable insulation thicknesses.

Not required.

Option 1: non-continuous insulation in door area.

Option 2: Continuous insulation.

Sustainability data

Contains Red List materials

No

Country of material origin

Germany

Country of product manufacture

Germany

Literature

Car Park Solutions

Car Park Solutions

Call Carlift Via App

Call Carlift Via App

Lifting Solutions Brochure

Lifting Solutions Brochure

TRAFFICO and CARRICO Planning Guide

TRAFFICO and CARRICO Planning Guide

Focus on Architecture

Focus on Architecture

Similar products from Lödige Industries

CUBILE® Car Parking System

CUBILE® Car Parking System

PEGASOS® Car Lift

PEGASOS® Car Lift

RESPACE -pallet based automated parking system - Automated parking system

RESPACE -pallet based automated parking system - Automated parking system

TRAFFICO® Car Lift

TRAFFICO® Car Lift