Compare

Bauder Total Roof System PLUS Reinforced Bitumen Membrane Cold Roof Covering System Self-Adhered (with Torch-On Capping Sheet)

Name: Bauder Total Roof System PLUS Reinforced Bitumen Membrane Cold Roof Covering System Self-Adhered (with Torch-On Capping Sheet)
Brand: Bauder Ltd
SKU: wfzeG7BSMqAoNVKYZ9utHJ

Verified by manufacturer 10 days ago

Bauder Ltd

Third party certifications:

CCPI System
Certificate type
BBA Agrément Certificate
Certificate type
EPD
Certificate type

Total bitumen cold roof system PLUS bitumen membrane waterproofing system suitable for new build and refurbishment applications.

Jump to:

+44 (0)1473 257671 Website

Application

Suitable for a variety of applications on both new build and refurbishment projects and can be used in warm, cold and inverted roof scenarios. For green roof situations, see Bauder Total Green Roof System PLUS (BTGRS PLUS).

Description

Total bitumen cold roof system PLUS incorporating torch-on bitumen capping sheet with self-adhered bitumen underlayer.

Bauder Total Roof System PLUS (BTRS PLUS) is suitable for a variety of applications on both new build and refurbishment projects and can be used in cold, warm and inverted roof scenarios. For green roof situations, please see Bauder Total Green Roof System PLUS (BTGRS PLUS).

Plus points:

Two-layer 8.7 mm combined waterproofing.
Atactic polypropylene (APP)/ styrene-butadiene-styrene (SBS) dual-modified bitumen 5.2 mm cap sheet with glass-polyester composite reinforcement.
SBS modified elastomeric bitumen, used on the underside, provides flexibility to cope with European climatic extremes of between -40°C to +150°C. Tested to EN 1109 and EN 1110 and stated on the BBA certificate.
APP-modified bitumen, used for the upper coating, offers a life expectancy in excess of 35 years according to section 12 of the BBA certificate.
Incorporates self-adhesive membranes.
Safe2Torch detailing design.
Range of guarantee packages to fulfil cover requirements for the project (dependent on system/ product selection). For more information contact Bauder's technical department for a sample guarantee outlining cover level, terms and conditions.

Verified properties:

CCPI Verification 0007700016/1025: This systems CCPI mark provides accuracy of data delivering assurance to specifiers.
Fire classification B_ROOF(t4) to BS EN 13501-5 tested to TS 1187 test 4 for external fire exposure on defined permutations of product build up.
Fire properties – membranes deemed “unrestricted” in certain circumstances as categorized in the BBA certificate
Service life >35 years.
EPD Certification on system components:
Bitumen membranes.

General information

Color	Grey Guidance for specification option: Mineral finish is Charcoal Grey.
Finish	Mineral
Material	Bitumen
Shape	Square Rectangle
Length	Bespoke
Width	Bespoke
Warranty description	- Manufacturer guidance Guarantee options could include ‘Product’, ‘Product and Workmanship’ and ‘Product, Workmanship and Design’ guarantees. All guarantees available for this system are subject to the works being carried out in accordance with the Bauder specification and being installed by a Bauder Approved installer. For full details and further information regarding guarantees and alternative systems, consult manufacturer.

Uniclass	Ss_30_40_30_70 Reinforced bitumen membrane cold roof covering systemsPrimary
CAWS	J41/130 Built-up reinforced bitumen membrane cold deck roof covering J41/12 Reinforced bitumen membrane cold deck roof covering

Specification data - Reinforced bitumen membrane cold roof covering systems

Preparation	-
Horizontal work	Activator-Primer (Canister) APR01 – Black. Guidance for specification option: Synthetic rubber resin-based primer, developed to provide the necessary preparation of substrates prior to the installation of self-adhesive and torch-applied membranes. The spray application offers improved film thickness speed of application (by up to 50% over roller applied products) and quick drying in a matter of minutes. Coverage: Approximately 96 g/m² (300 mm-wide spray one coat, 192 g/m² two coats). Two coats may be required for very porous substrates. Application temperature: +5 to +30°C. Drying time (at 10°C): 5–10 minutes. Colour: Black. Recoat time if left exposed: Four hours. Suitable substrates: Oriented strand board (OSB); plywood; timber; concrete; lightweight concrete or cementitious materials; metal; Bauder self-adhesive underlayers; existing asphalt and bitumen membranes; polyisocyanurate (PIR) insulation. Non-suitable substrates: Mica finished surfaces (e.g. KSD FBS); Laminated paper-foil faced insulation; expanded polystyrene (EPS) or extruded polystyrene (XPS) insulations; BauderROCK or mineral wool insulation; BauderGLAS or cellular glass insulation; copper; thermoplastic waterproofing membranes. SA Bonding Primer. Guidance for specification option: For Self-Adhesive membranes to Concrete and Screeded Substrates. Synthetic rubber-based primer, specially formulated to increase the bond strength of Bauder self-adhesive bitumen membranes to a wide range of substrates, including timber, concrete, brick, metal and most plastics. Coverage: approximately 200–300 g/m² (depending on substrate porosity). Application temperature: +5 to +30°C. Drying time: approximately 30 minutes, dependent upon ambient temperature and material porosity. Colour: Black. Recoat time if left exposed: Four hours. Suitable substrates: timber, concrete, brick, metal and most plastics. Manufacturer guidance Contact manufacturer to confirm substrate suitability if required.
Skirtings and vertical work	As 'Horizontal work'.
Waterproof covering	-
First layer	-
Type	BauderTEC KSA DUO 35. Guidance for specification option: Elastomer bitumen self-adhesive underlayer with variable technology for lap sealing. The two side laps of the membrane have differing finishes. On one lap there is a self-adhesive finish, whist the opposite lap has a glass fleece. This allows the membrane to be sealed with either a gas torch or hot air welder. Width: 1 m. Length: 7.5 m. Thickness: 3.5 mm. Weight: 4 kg/m². Surface, top: PE Foil; surface, bottom: release film (cold self-adhesive bitumen underside). Reinforcement: 200 g/m² glass lattice with glass fleece combination. Cold bending test, top -25°C; bottom -30°C. Softening point: >100°C. Tensile strength: length >1000 N/50mm; transverse >1000 N/50mm. Elongation at break: length >2%; transverse >2%.
Attachment	Self-adhered.
Top layer	-
Type	BauderKARAT. Guidance for specification option: Polymer bitumen dual formulation torch-on capping sheet. APP plastomeric top and SBS elastomeric bottom. The product features a 300 g/m², spunbond polyester/ glass composite reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation. Width: 1 m. Length: 5 m. Thickness: 5.2 mm. Weight: 6 kg/m². Surface, top: charcoal grey mineral chippings; surface, bottom: thermofusible polyethylene. Reinforcement: 300 g/m² Polyester/ glass composite. Cold bending test, top: ≥-25°C; bottom: ≥-40°C. Softening point, top: ≥150°C; bottom: ≥120°C. Tensile strength: length 1450 (±10%) N/50mm; transverse >1450 (±10%) N/50mm. Elongation at break: length >23% (±3); transverse >23% (±3). Manufacturer guidance Not for use with green roof systems.
Attachment	Torch applied.
Detail work	-
Flashings	Bauder GRP Trim. Guidance for specification option: GRP roof edge trim for use with Bauder bituminous roof systems. Available colours of either grey or black and a choice of profiles to suit the requirements of most projects. Bauder GRP Water Check Trim. Guidance for specification option: GRP water check trim to be used on parapets and perimeter kerbs wider than 200 mm – must not be used on its own as a check kerb. Available in black only. Bauder Aluminium Termination Bar. Guidance for specification option: Natural finish aluminium alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall. Bauder GRP Termination Bar. Guidance for specification option: Black glass reinforced plastic (GRP) alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.
Skirtings and upstands	Bauder LiquiFIBRE Detailing Kit. Guidance for specification option: Fast-curing waterproofing resin containing fibre reinforcement that can be used for detailing awkward shapes or inaccessible areas where using LiquiDETAIL is impractical. PMMA-based resin that requires a catalyst and is solvent-free, isocyanate-free and halogen-free. Bauder LiquiDETAIL. Guidance for specification option: Cold liquid-applied fast curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing and is solvent-free, isocyanate-free and halogen-free.
Welted drips	Required. Guidance for specification option: Insert requirements. Not required.
Cover strips	Required. Guidance for specification option: Insert requirements. Not required.
Ancillary items	Required. Guidance for specification option: Insert requirements. Not required.
Surface protection	Not required. Required. Guidance for specification option: BauderGREEN FSM 600 protection mat laid on the completed waterproofing to protect the completed waterproofing from mechanical damage. Must be used with decorative ballast finishes.
System accessories	Not required. Bauder lightning conductors. Guidance for specification option: Lightning conductor clips are a specially designed secure clip that allows for movement. Bauder Lightning conductor clips – Type 4: Polyvinyl chloride (PVC) coated or bare conductor. Bauder rainwater outlets. Guidance for specification option: Bauder has a range of insulated or stainless-steel rainwater outlets. The insulated outlets can be used for maintaining thermal continuity at drainage points. Suitable for warm, cold and inverted roof construction. The BRE Certified (report no. HPR357-303748) high thermal value of the rigid foam body prevents condensation from forming on the underside of the outlet body. Designed for use when connecting to conventional drainage systems and is suitable for both new build and refurbishment projects. Outlets are included in the Bauder waterproofing system guarantee as they are integrated components. Flow rate figures (where applicable) are based on BS EN 12056:3:2000, typically taken using a 35 mm header of water including leaf grille: Bauder Bitumen Compact Vertical Outlet DN100: Insulated internal outlet, 6.1 L/s. Bauder Bitumen Vertical Outlet DN70: Insulated internal outlet, 7.1 L/s. Bauder Bitumen Vertical Outlet DN150: Insulated internal outlet, 7.2 L/s. Bauder Bitumen Letterbox Parapet Outlet DN 205 including stainless-steel leaf guard, 2.02 L/s. Bauder Bitumen Parapet Outlet DN 100 including stainless-steel leaf guard, 1.06 L/s. Bauder Bitumen Vertical Refurb Outlet DN70, designed to ensure the maximum flow rate of the existing downpipe is not exceeded. Bauder Bitumen Vertical Refurb Outlet DN95, designed to ensure the maximum flow rate of the existing downpipe is not exceeded. Bauder Bitumen Vertical Refurb Outlet DN145, designed to ensure the maximum flow rate of the existing downpipe is not exceeded. Bauder Bitumen Parapet ‘Tell-Tale’ Overflow DN50, designed to be used in conjunction with other roof drainage outlets to ensure that there is no water ingress into the build and that the structural load of the roof is not exceeded and provides a visible warning that the roof is holding excessive water. BauderSOLAR F XL Photovoltaic Mounting System. Guidance for specification option: Bauder flat roof PV mounting solution for framed solar modules. The mounting units are secured to the roof using a membrane-to-membrane welding technique. This installation method means that the roof is not compromised by penetrations for fixings, nor is it ballasted, which would add additional weight loading to the roof. Specifically designed to be installed on Bauder bituminous or single-ply waterproofing systems and provide a lightweight, low-risk and quick-to-install mounting solution for framed solar modules. Bauder rooflights/ glazing/ ventilation. Guidance for specification option: All these glazing products are fully compatible with the roof waterproofing systems. Consult manufacturer for details and insert requirements. BauderDOME Rooflight. Bauder Euroglaze Rooflight. BauderFLATGLASS Rooflight. Bauder Special Modular Rooflight. Bauder Continuous Rooflight. Bauder Walk-on Rooflight. Bauder Direct Glazing. Bauder AOV. Bauder Modular Link Glazing. Bauder Structural Rooflight. Bauder Fire Rated Rooflight.

Surfacing layer	Not required. Bauder Supported Paving. Guidance for specification option: A range of pedestal support systems designed to meet the exacting standards of finishing levels demanded when specifying open-jointed paving and decking finishes for hard landscaped intensive rooftops. Bauder Slope Correcting (DPH) Pedestal: fully adjustable pedestal with slope corrector, achieves depths from 17–1070 mm. Bauder Adjustable (PB) Pedestal: adjustable pedestal, achieves depths from 18–955 mm. Bauder Non-Combustible (NC) Pedestal: All metal, non-combustible, with integrated slope corrector, achieves depths from 42–282 mm. Bauder Supported Decking. Guidance for specification option: A range of pedestal support systems designed to meet the exacting standards of finishing levels demanded when specifying open-jointed paving and decking finishes for hard landscaped intensive rooftops. Bauder Slope Correcting (DPH) Pedestal: fully adjustable pedestal with slope corrector and available kit support for joist battens, achieves depths from 17–1070 mm. Bauder Adjustable (PB) Pedestal: adjustable pedestal with available joist holder accessory for decking, achieves depths from 18–955 mm. Bauder Non-Combustible (NC) Pedestal: All metal, non-combustible, with integrated slope corrector and non-combustible Bauder Ali-Rail for decking, achieves depths from 42–282 mm. Ballast (by others). Guidance for specification option: 20–40 mm rounded washed pebbles.