Bauder Single Ply Thermofol Cold Roof Membrane System Adhered

Bauder Single Ply Thermofol Cold Roof Membrane System Adhered

Bauder Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Single ply Thermofol polyvinyl chloride (PVC) cold roof system, incorporating Thermofol single ply membrane for adhesive bonding.

Jump to:
+44 (0)1473 257671 www.bauder.co.uk
Description

Single ply Thermofol polyvinyl chloride (PVC) cold roof system, incorporating Thermofol single ply membrane for adhesive bonding.

Bauder Single Ply Thermofol PVC Roof system is suitable for a variety of applications on both new build and refurbishment projects and can be used in warm, cold and inverted roof scenarios. Can also be used for extensive green roof situations.

See BBA certification 06/4354. Thermofol can meet current UK Building Regulations Part B for external fire protection.

Key features:

  • Membrane is lightweight with high tensile strength of 1000 N/50 mm.
  • High quality polymers ensure membrane stays flexible at -30°C.
  • Formulation resistant to micro-organism attack.
  • Installation using hot air welding for strong joints.
  • High performance halogen-free fire retardant.

Benefits:

  • Membrane is resistant to tears.
  • Resistant to European climatic conditions.
  • Approved for green roof landscaping by FLL.
  • Flame-free installation.

Please note that profile metal decks will require a plywood/ Oriented strand board (OSB) overlay for cold roofs. Consult manufacturer for details.

General information

Uniclass 2015

Ss_30_40_30_78 Single layer sheet cold roof covering systemsPrimary

CAWS

J42/130 Cold deck roof covering

Specification data - Single layer sheet cold roof covering systems

Product Reference

Bauder Single Ply Thermofol Cold Roof Membrane System Adhered

Waterproof membrane

Thermofol U

1.2 mm, 1.5 mm, 1.8 mm, or 2 mm polyester reinforced, for all applications except for adhering to existing bitumen.

Thermofol U15 FB

1.5 mm, fleece backed polyester reinforced, for all applications.

Attachment

Fleece Backed Membrane Adhesive – Drum

For adhering U15 FB to plywood, concrete, existing bitumen and most other deck/ surface types. Please check suitability with Bauder.

PU Fleece Backed Membrane Adhesive

For adhering U15 FB to plywood, concrete, existing bitumen and most other deck/ surface types. Please check suitability with Bauder.

Spray Contact Adhesive

For adhering U15 FB to most new build deck types. Not for adhering to existing bitumen. Please check suitability with Bauder.

Thermofol Contact Adhesive - Drum

For adhering U15 (Non-Fleece backed) to most new build deck types. Not for adhering to existing bitumen. Please check suitability with Bauder.

Accessories

See 'Options below and insert requirements.

Product Options

Detailing:

The waterproofing should be turned up by at least 150 mm around features such as rooflights, parapets and service pipes passing through the roof. Detail work to upstands, edge details, flashings, etc. should be carried out using either Thermofol D membrane adhered directly to the substrate using Bauder Thermofol Contact Adhesive or mechanically fastened using Thermofol U membrane. Detailing should be carried out with a separate flashing. Consult Bauder for further information on detailing.

Waterproof membrane:

- Thermofol U15 FB Membrane:

A fleece backed, polyester reinforced Polyvinyl Chloride (PVC) membrane, designed for both adhesive and mechanical fastening.

Both mechanically fastened and adhered systems are usually installed using hot air welding techniques at the seams, where the sheets are fused together by heat, creating a totally secure homogenous layer.

  • Width: 1.5 m.
  • Length: 20 m.
  • Thickness: 2.5 mm (includes 1 mm fleece).
  • Weight: 2.04 kg/m².
  • Surface: Light Grey (RAL 7035), Blue Grey (RAL 7031), Anthracite (RAL 7016).
  • Bottom: Polyester fleece – dark grey.
  • Reinforcement: Pre-coated cross-weave polyester.
  • Tensile strength: ≥ 1000 N/50 mm.
  • Cold bending test: ≥ -30°C.
  • Elongation at break: 20%.

- Thermofol U12, U15, U18, U20 Membrane:

A polyester reinforced Polyvinyl Chloride (PVC) membrane, providing a strong, versatile solution for both adhesive and mechanically fastened roofing projects. The surface resists UV damage and is highly solar reflective in Light Grey colour. It has a high tensile strength and is reinforced with a pre-coated polyester cross-weave to make it resistant to tears and punctures, ensuring durability.

  • Width: 1.5 m.
  • Length: 20 m.
  • Thickness: 1.2 mm, 1.5 mm, 1.8 mm, 2 mm.
  • Weight: 1.47 kg/m², 1.81 kg/m², 2.16 kg/m², 2.46 kg/m².
  • Surface: Light Grey (RAL 7035), Blue Grey (RAL 7031), Anthracite (RAL 7016). - (U12 - 1.2 mm and U20 - 2 mm available in Light Grey Only).
  • Bottom: Dark grey.
  • Reinforcement: Pre-coated cross-weave polyester.
  • Tensile strength: ≥ 1000 N/50 mm.
  • Cold bending test: ≥ -30°C.
  • Elongation at break: 19% (U20 - 20%).

Accessories:

- Bauder Thermofol D18 PVC Detailing Membrane:

  • This unreinforced detailing membrane is manufactured from Polyvinyl Chloride membrane (PVC). The product is highly flexible due to the incorporation of internal plasticizers during the manufacturing process. This combination of materials provides high elongation, good thermal stability and flexibility. Complex three-dimensional detailing to curves, pipes or awkward shapes can be formed using Thermofol un-reinforced D18 membrane. Otherwise Thermofol pre-formed corners must be used at intersections and returns.
  • Available in all three membrane colours. Light Grey (RAL 7035), Blue Grey (RAL 7031), Anthracite (RAL 7016).
  • Membrane to be either fully bonded using Bauder Thermofol Contact Adhesive - Drum or mechanically fixed according to the construction - refer to the Bauder Single Ply Installation Manual for further guidance.

- Bauder Thermofol Pre-formed Corners:

  • Pre-formed PVC internal and external corners for use with Thermofol membrane.
  • These products are designed to dress into 90° corners, they can be warmed and manipulated to fit corners over and under 90°. If this is not possible a gusset must be dressed to an internal corner and a piece of D18 unreinforced detailing membrane can be used to an external corner with a ‘thumb print’.
  • Internal (90 x 90 mm) and External (150 x 170 mm) pre-formed corners can be reversed to allow them to be used at other junction points to ensure a watertight seal is easy to achieve.
  • Pre-formed corners must be fully heat welded from the centre outwards working around each side until the entire patch is welded.
  • Available in all three membrane colours: Light Grey (RAL 7035), Blue Grey (RAL 7031), Anthracite (RAL 7016).
  • For information please contact Bauder Technical Department.

- Bauder Thermofol Laminated Metal:

  • 1.4 mm thick. A 0.6 mm thick, hot dip galvanized steel plate, laminated on one side with 0.8 mm thick layer of Thermofol PVC, for use in creating flashings and detailing.
  • Available in all three membrane colours: Light Grey (RAL 7035), Blue Grey (RAL 7031), Anthracite (RAL 7016).
  • Bauder Thermofol Coated Metal (1 x 2 m) is supplied in pallet quantities in flat sheet form.
  • Full fixing and installation information can be found in the Single Ply Technical installation Guide.

- Bauder Thermofol Pre-fabricated Laminated Metal:

  • 1.4 mm thick. A 0.6 mm thick, hot dip galvanized steel plate, laminated on one side with 0.8 mm thick layer of Thermofol PVC, for use in creating flashings and detailing.
  • Available in all three membrane colours: Light Grey (RAL 7035), Blue Grey (RAL 7031), Anthracite (RAL 7016).
  • Each flashing type is supplied in a standard 2 m length.
  • Full fixing and installation information can be found in the Single Ply Technical installation Guide.

- Bauder Thermofol Profiles:

  • Bauder Thermofol PVC decorative Profile to be heat welded to Thermofol PVC membrane, to create a ‘Standing Seam’ effect to roofs.
  • Bauder Thermofol Profiles are supplied in 3m lengths. (W 35 x H 27 mm).
  • Available in all three membrane colours. Light Grey (RAL 7035), Blue Grey (RAL 7031), Anthracite (RAL 7016).

- Bauder single ply lightning conductors:

  • A specialist lightning conductor clip riveted to a Bauder membrane base. These clips are available to suit coated 25 x 3 mm conductor tape. The membrane base is Thermofol PVC. The base allows the product to be fully welded to the waterproofing, whilst the clip allows movement of the tape caused by expansion/ contraction.
  • Bauder Lightning conductor - Type 4: PVC coated.
  • Available in all three membrane colours. Light Grey (RAL 7035), Blue Grey (RAL 7031), Anthracite (RAL 7016).

- Bauder Thermofol Rigid PVC rainwater outlets:

  • A rigid PVC rainwater outlet enabling Thermofol membrane to be welded to the flange plate. UV stable throughout. The unbacked Thermofol membrane should be heat welded up to the aperture to ensure colour consistency on the roof.
  • Rigid PVC base plate in Light Grey: 300 mm (70 DN), 385 mm (100 DN and 150 DN).
  • Rigid PVC spigot length: 300 mm.

Bauder outlets are sized to indicate the actual internal diameter of the spigot. For information on non-standard sizes and refurbishment applications, please contact Bauder Technical Department.

  • Thermofol Rigid PVC Rainwater Outlet DN 70: Flow rate 4.6 L/s (including leaf guard).
  • Thermofol Rigid PVC Rainwater Outlet DN 100: Flow rate 5.5 L/s (including leaf guard).
  • Thermofol Rigid PVC Rainwater Outlet DN 150: Flow rate 6.6 L/s (including leaf guard).

- Bauder Leaf Guard – Long Leg for Rigid PVC Vertical Outlets:

  • A universal leaf guard compatible with Thermofol Rigid PVC rainwater outlets for preventing debris blocking the outlet.
  • For outlet spigot dimensions ranging from 60–220 mm. Grip Range Depth: 80mm–105 mm. This product is UV stable.
  • Material: Polyamide.
  • Colour: Black.

This Bauder Leaf Guard is designed to fit into Bauder Rigid PVC rainwater outlets. For information on non-standard sizes and refurbishment applications, please contact Bauder Technical Department.

- Bauder Thermofol Stainless Steel rainwater outlets:

A high performance stainless steel outlet with factory installed Thermofol membrane flange. Supplied with an O-ring and a wire ball leaf grill.

  • Stainless steel base plate: 250 x 250 mm.
  • Thermofol membrane flange: 350 x 350 mm (Light Grey/ Blue Grey).
  • Stainless steel spigot length: 400 mm.

Bauder outlets are sized to indicate the actual internal diameter of the spigot. For information on non-standard sizes and refurbishment applications, please contact Bauder Technical Department.

  • Thermofol Stainless steel Rainwater Outlet DN 70: Flow rate 2.98 L/s (including leaf guard).
  • Thermofol Stainless steel Rainwater Outlet DN 100: Flow rate 3.94 L/s (including leaf guard).
  • Thermofol Stainless steel Rainwater Outlet DN 150: Flow rate 6.76 L/s (including leaf guard).

- Bauder Thermofol Rigid PVC Parapet Outlet - DN 100 mm:

A rigid PVC parapet rainwater outlet enabling Thermofol membrane to be welded to the flange plate. UV stable throughout. The unbacked Thermofol membrane should be heat welded up to the aperture to ensure colour consistency on the roof.

  • Rigid PVC base plate in Light Grey: 280 x 180 x 110 mm (w x h x d).
  • Rigid PVC spigot length: 480 mm.
  • Thermofol Rigid PVC Rainwater Outlet DN 100: Flow rate 1.0 L/s.

Bauder outlets are sized to indicate the actual internal diameter of the spigot. For information on non-standard sizes and refurbishment applications, please contact Bauder Technical Department.

- Bauder Thermofol Emergency Overflow Outlet:

An extruded PVC emergency overflow outlet compatible with Thermofol membrane.

  • 50 mm diameter through wall overflow outlet manufactured in light grey colour.
  • Flange dimeter: 160 mm.
  • Spigot length: 480 mm.
  • For information on non-standard sizes and refurbishment applications, please contact Bauder Technical Department.

- Bauder Thermofol Embossed Walkway Membrane:

Bauder Thermofol Embossed Walkway is a 2.0mm thick, reinforced PVC membrane with dark grey embossed finish to be loose laid over the finished membrane surface. The membrane should be heat welded around its full perimeter to the surface of the finished waterproofing.

- BauderSOLAR Photovoltaic Mounting System:

Bauder Flat roof PV mounting solution for framed solar modules. The mounting units are secured to the roof using a membrane-to-membrane welding technique. This installation method means that the roof is not compromised by penetrations for fixings nor is it ballasted, which would add additional weight loading to the roof. Specifically designed to be installed on Bauder bituminous or single ply waterproofing systems and provide a lightweight, low risk and quick to install mounting solution for framed solar modules.

For adhered and mechanically fastened Thermofol systems, (only suitable for use with U15 FB, U18 and U20).

- Bauder LiquiFIBRE Detailing Kit:

Fast curing waterproofing resin containing fibre reinforcement that can be used for detailing awkward shapes or inaccessible areas where using LiquiDETAIL is impractical. PMMA-based resin that requires a catalyst and is solvent, isocyanate and halogen free.

- Bauder LiquiDETAIL:

Cold liquid applied fast curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing and is solvent, isocyanate and halogen free.

- Bauder rooflights/ glazing/ ventilation:

All these glazing products are fully compatible with the roof waterproofing systems. Consult Bauder for details and insert requirements.

  • BauderDOME Rooflight.
  • Bauder Euroglaze Rooflight.
  • Bauder Special Modular Rooflight.
  • Bauder Continuous Rooflight.
  • Bauder Walk-on Rooflight.
  • Bauder Direct Glazing.
  • Bauder AOV.
  • Bauder Modular Link Glazing.
  • Bauder Structural Rooflight.
  • Bauder Fire Rated Rooflight.

Third party certifications
  • Certificate: 06/4354
Similar products from Bauder Ltd